used ABENE Tool Milling Machines

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Control : Heidenhain TNC 310 Table Clamping surface 1200 x 450 mm Longitudinal travel 650 mm Transverse travel 480 mm Vertical travel 475 mm T-slots 6 x 18 H7 Maximum load 400 kg Distance Distance between T-slots 65 mm Spindle centre to underside counter holder 160 mm Feeds Longitudinal feed speed 0 – 4000 mm/min Transverse feed speed 0 – 4000 mm/min Vertical feed speed 0 – 1500 mm/min Rapid traverse Longitudinal feed 4000 mm/min Transverse feed 4000 mm/min Vertical feed 1500 mm/min Spindle Spindle cone ISO 40 Spindle speeds, number 2 Speed range 55 – 3000 rpm Head rotatable 0 - 140° Engines Spindle motor, 2800 rpm 7.5 kW Feed motor, Z, AC 10.5 Nm Feed motor, X+Y, AC 3.0 Nm Cooling pump 0.12 kW Proviso Length 2200 mm Width 1800 mm Height 2000 mm Weight Net weight 2100 kg Gross weight 2300 kg

High speed milling machine built in Sweden 1999. Has only worked with soft materials so it is in great condition.

digital readout: HEIDENHAIN Number of axles: 3 St. x-travel: 760 mm y-travel: 350 mm z-travel: 500 mm table surface area: 1300x320 mm max. table loading capacity: 400 kg spindle head adjustment: 0-510 mm spindle cone ISO: 40 turning speed range: 55-3000 U/min feeds -stepless-: 0-3000/0-1200 mm/min feed motor: 3 kW total power requirement: 7.5 kW weight of the machine ca.: 2.3 t dimensions of the machine ca.: 2.2x1.8x2.0 m vice: jaw width: 300 mm Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!

Turning head, spindle tool, boring tool, boring tool, boring rod type 040.084S0012 Tool holder: SK40 - DIN 69871 Boring rod diameter: 70 mm Machining diameter: 75-120 mm Tool insert: triangle 10.5 mm - Tool on the pictures set to approx. 108 mm Machining depth: max. 200 mm Tool Total length: 300 mm Net weight: 6.5 kg Used, but good condition; used

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, tool box -Tool box: with non-sparking tools -Content: see photos -Dimensions: 430/200/H230 mm -Weight: 28kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Recording: 25 mm -Drawing: in the photos -Dimension: 40 x 130 mm -Length: 495 mm -Weight: 12.5 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25/18 mm -Total length: 138 mm -Total height: 70 mm -Weight: 4 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Total height: 195 mm -Weight: 18 kg

Driven Tool, Driven Tool Holder for CNC Lathe BIGLIA fits 100% on a B 501 Y Manufacturer OESTERLE Partner Art.-No. 310 5521 E32 B109 Year of manufacture: approx. 2010 Serial No. 06 - 12 / 0330 Collet holder: ER32 - with a collet 18 mm Weight: 7.5 kg very good condition similar to M.T. ITALY; used

Tool trolley with drawers and tool set HBM MACHINES GREYLINE article number: 9404 width ( without handle ): 800 mm depth: 460 mm height: 820 mm ( without castors ) Material: sheet steel 6 drawers: width: 540 mm, depth: 400 mm, height: 70 mm drawers with 245-piece tool set 1 drawer: width: 540 mm, depth: 400 mm, height: 200 mm drawer is damaged ! left side with perforated wall, right side with storage compartment with door further damage to the handle and the upper shelf 2x swivel castors with parking brake, 2x fixed castors used, tested ! Tool set as good as new ! Dimensions: 880 x 500 x 970 mm

Description: With 8 drawers  , Contents , Pillar and guide sleeves for tools, , Thread plugs, , Ejector rods, Mounting material, , Twist drill Approx. Onsite Dimension. (l x w x h): 710 x 700 x 1,000 mm, weight approx.: 380 kg

Description: With 9 tool holder inserts Tool holders mostly equipped with tools weight approx.: 280 kg, Approx. Onsite Dimension. (l x w x h): 630 x 620 x 2,000 mm

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

Table clamping surface: 630 ø mm traverse path x: 600 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: hand 80 mm spindle retainer: ISO 40 spindle speeds: 20-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse rate: 4 m / min. Connection: 380V kW space: 2000 + 850 x 2000 x 2000 mm weight: 3300 kg

No. 3934: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 1, with active digital display ARB.-ber.: 300 x 160 x 340 mm, power: 1,5 kW Accessories: universal table hydraulic machine vise Tool Cabinet Other: Toolholder SK 40 RPM 2000 RPM

No. 4293: 1 gebr. Universal tool milling machine Fabr. EPPLE, type UFM 100 Digi,. Bu. 2004 with 3-axis digital display ARB.-ber.: 620 x 250 x 440 mm, Accessories: table 1120 x 260 mm Universal milling head Other: Spinedel SK 40 Spindle speed 40 - 1600 min-1 Weight 1600 kg

: 4471 No.1 gebr. Universal milling machine Fabr. IBERIMEX, type U 1000, b. 1995 with digital display Visulesta 4 ARB.-ber.: 1000 x 540 x 430 mm, power: 5.5 kW Accessories: table size 1500 x 360 mm Documentation Other: ISO 50 spindle adaptor Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 to

No. 4614: 1 used Universal milling machine make MIkRON, type WF 31 SA, with HEIDENHAIN TNC 114 work range: 560 x 500 x 400 m Accessories: rigid angle table SK 40 Coolant system Other: Speed range 40-4000 RPM Weight 2450 kg

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling  ...