We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
usato
TRONCATRICE BILATERALE COMEC MOD. TD1200 - NORME CE - n.2 motori 2 hp - n. 2 lame diametro 350 mm - lunghezza min/max di lavoro 220/1200 mm - inclinazioni di taglio: orizzontale +/- 35°; verticale +/- 35° -volt. 380/50 - SN 961227 - anno 1996
usato
TRONCATRICE BILATERALE COMEC MOD. TD1200 - NORME CE - n.2 motori 2 hp - n. 2 lame diametro 350 mm - lunghezza min/max di lavoro 220/1200 mm - inclinazioni di taglio: orizzontale +/- 35°; verticale +/- 35° -volt. 380/50 - anno 1995
usato
LEVIGATRICE ORBITALE COMEC MOD. LC/15 AV - con dispositivi di alimentazione -volt. 380/50
usato
LEVIGATRICE ORBITALE COMEC LC/20/AV USATA - NORME CE - Diametro min/max 10/160mm - con unità di alimentazione -volt. 400/80 - SN 010118 - anno 2001
usato
CAVATRICE ORIZZONTALE VERTICALE COMEC MOD. MOV12X - 4+4 mandrini orizzontali - 3+3 mandrini verticali - Interasse mandrini min./max 85/1000 mm. - n.2 caricatori (destro e sinistro) - Inclinazione massima dei mandrini orizzontali ±20° - Inclinazione max. mandrini verticali +30°/-10° - Inclinazione dei banchi di bloccaggio 0/-20° - Interasse minimo mandrini 85 mm - Interasse max. mandrini 1000 mm - Lunghezza massima di mortasatura 100 mm - Profondità massima di mortasatura 50 mm -volt. 380/50 - SN 962135 - Norme CE (anno 1996)
usato
Levigatrice trasversale per componenti di sedie Comec Motore principale da 5,5 kW Larghezza nastro abrasivo 100mm Ugello di estrazione 110mm Dimensioni della macchina 233x60x140cm
Levigatrice orbitale Comec LC/15AV Diametro elemento min/max 10-100mm Motore principale da 4kw Motore di alimentazione 2×0.25kw Dimensioni nastro abrasivo 1220x70mm Certificato CE
Levigatrice orbitale Comec LC/15AV Diametro elemento min/max 10-100mm Motore principale da 4kw Motore di alimentazione 2×0.25kw Dimensioni nastro abrasivo 1220x70mm Certificato CE
usato
Vendo troncatrice doppia senza incisione con COMEC TD2400 + CA in continuo. Larghezza di lavoro da 250 a 2400 mm. Profilo massimo della sega 80 x 100 mm Regolazione angolare di ogni testa: Radiale +50° / - 50° Assiale +45°/ - 45° Diametro lama fi.350/30mm Potenza motore 1.85KW + 1.85KW Magazzino per elementi. Espulsione di nuovo all'operatore Condizioni pari al nuovo. Pienamente operativo e pronto all'uso. Possibilità di verifica. Disponibile a breve. Con CE e documentazione completa.
usato
INDICAZIONI: Campo di lavoro mm: min 220 - max 1200 Diametro lama mm: 350 Alesaggio mm: 30 2 motori da 1,5 KW ciascuno Inclinazione lama verticale e orizzontale 35° Con cassetto per accessori
usato
SECOND-HAND MUTILPLE HORIZONTAL MORTISER COMEC MOD. MMS/15-2000-CA - Automatic loader - Max. working length mm. 2000 - N. 7 spindles - Volt 380/50 - S/N 970406 - CE rules (year 1997)
usato
SECOND-HAND MILLING MACHINE FOR CORNER SEATS COMEC MOD. FAS2 - S/N 951106 - Volt. 380/50
usato
SECOND-HAND LONGITUDINAL SANDER COMEC MOD. LON LS - CE RULES - Volt. 380/50 - S/N 970408 - Year 1997
usato
SECOND-HAND CLAMP WITH FOLDING BENCHES COMEC MOD. SPL/3R - CE STANDARDS - Max tables inclination 30° - Max working dimensions 1350x780 mm - N. 3 hydraulic cylinders - Hydraulic unit 5.5 hp - CE rules - Year 1995 - Volt. 380/50 - S/N 950304
usato
SECOND-HAND BORING AND END CUTTING MACHINE COMEC MOD. FIMOV 2500 2UT+2UF+CA2 - N. 2 tilting cutting units - N. 2 vertical boring units - Maxi working length 250 cm - With automatic loader - Perimetral safety net - S/N 021132 - CE (year 2002)
usato
Nastro trasportatore Comec Marca: Comec Lunghezza A.A = 10.000 mm Larghezza nastro: 500 mm Azionamento: Motore elettrico con cambio Lunghezza A.A = 5700 mm Larghezza nastro: 650 mm Azionamento: Motore elettrico con cambio
usato
Mulino perle COMEC M 8 Acciaio inossidabile Doppia giacca Capacità contenitore 8 l Ottime condizioni pronte all'uso, direttamente dalla produzione!
usato
Vendo un trapano con unità di taglio COMEC FM0V8 2000, costruito nel 1997. Larghezza di lavoro max. 2000mm Configurazione: 0 motori dal basso 1+1 motori laterali / regolabili angolarmente 2 motori da dietro / testa angolare regolabile 3 motori dall'alto / testa angolare regolabile 4 pezzi di stampa di materiale dall'alto 2 seghe tagliate dall'alto / testa angolare regolabile Teste di perforazione atipiche a 5 mandrini di cui 3 x 15 mm / 2 x 25 mm. Dubel testa nel prezzo. Ottima aggiunta. Disponibile lo stesso.
usato
Mulino usato realizzato da Comec, modello MM-12. Nuovo 2014. Peso 650 kg, 12 L, 30 kW, 6 Bar, CE, Eex dIIB T4. Pannello di controllo.
1987, CAP.: 75.000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4,0 M, LINEA 2 ND: CAP:: 30.000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; PESO COIL: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,
usato
Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator
usato
Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.
usato
CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed
usato
CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.
usato
CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...
usato
CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...
usato
New CNC Maschine Brand: Comec type: MD JAMB CNC machining center for complete machining of a wide range of door frames. 3 machining supports for cutting to length on miters, milling for corner connectors and door lock panels. A complete door frame element with decorative cladding and rebate cladding is machined in one set-up. A complete frame can thus be machined in approx. 2.5 - 3 min. Machining equipment can be individually adapted to the customers requirements.
usato
Description: • Leveling machine for chair feet • Serial number 971208 • Total installed power 1.10 KW • Circular saw blade diameter 250 mm • Saw blade travel in height approx. 70 mm • Table dimensions 800 x 800 mm • Actuating by foot switch Approx. Onsite Dimension. (l x w x h): 1,050 x 950 x 1,330 mm, weight approx.: 200 kg
usato
Description: • Orbital belt sander • Ideal for sanding chair components with round or oval sections and for chamfering edges of square or rectangular workpieces • Serial number 920170 • 2 feeders (input and output) with 0.26 KW motors each • 2 sanding bands measuring 1220 x 70 mm • Sanding motor power 4 KW • Passage diameter 170 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 850 x 1,400 mm, weight approx.: 300 kg
usato
Double carriage blow molding machine still installed and working, with siemens s7 plc, temperature adjustment from plc and possibility to store recipes.