Clamping force [kN] 250 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 270 x 270 Min./max. mold height [mm] min125mm Maximum opening width [mm] 450 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82
Battenfeld HM 60/350S injection molding machine – year of production 2008 – 41421h number – working hours worked. Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 550 x 530 Clearance between columns (hxv) [mm] 370 x 320 injection unit Screw diameter [mm] 35 Injection volume [cm3] 169 Injection weight [g] 153.8 Injection pressure [bar] 2083 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 10.4 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.79x1.24x1.88 – control b6
satıcı: GINDUMAC GmbH
This Battenfeld HM 2P 800-7700 Injection moulding machine was manufactured in 2003 in Austria. This machine has an injection unit with a screw diameter of 120mm, specific injection pressure of 1361 bar, and a calculated stroke volume of 5655 cm³, enabling a maximum injection weight of 5146 g. With a clamping force of 8000 kN, clear tie bar spacing of 1120x1020 mm, and platen size of 1620x1530 mm. The mould height is adjustable from 450 to 1100 mm, with an opening force of 480 kN. It operates with a drive power of 110 kW. Contact us anytime for further information.
Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1155x1195 Clearance between columns (hxv) [mm] 800x800 Min./max. mold height [mm] min 425/max 770 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 75 Injection volume [cm3] 1657 Injection weight [g] 1506 Injection pressure [bar] 1739
Clamping force [kN] 1000 Clearance between columns (hxv) [mm] 420 x 370 min./ max. mold height [mm] 230-730 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 250 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.4 Heater power [kW] 18.4 Dimensions and weight Dimensions (L x W x H) [m] 4.3 x 1.5 x 2.0 m
satıcı: GINDUMAC GmbH
This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.
Battenfeld HM 500/3400 S injection molding machine Year of production - 2006 Control: Unilog B6 Injection unit… / 3400 S Screw diameter: 65 mm Specific injection pressure: 2500 bar Injection volume: 1244 ccm Shot weight: 1070 g Crimping 500 / ... Strength: 500 t Board dimensions: 1590 x 1470 mm Clearance between columns: 1000 x 800 mm Tool height: 450… 1600 mm Opening for a path of 1150 mm Distance plates: 1600 mm - 1 x pneumatic valve - 1 x NW6 hydraulic core movable plate - Connection via robot. Euromap 67
satıcı: GINDUMAC GmbH
This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.
Clamping force [kN] 5500 Dimensions of mounting plates (hxv) [mm] 1280 X 1280 Clearance between columns (hxv) [mm] 900 X 900 min./ max. mold height [mm] min 450 max 800 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 85 Injection volume [cm3] 2128 Injection weight [g] 1936 Injection pressure [bar] 1354
satıcı: GINDUMAC GmbH
This Battenfeld BA 3500/1900 BK injection moulding machine was built in the year 2000. It is equipped with a Unilog 4000 control unit. The machine has a clamping force of 3500 kN. See video gallery for more impressions.
Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...
Screw diameter: 35 mm Calculated injection volume: 144 cm³ Length/diameter ratio: 22 L/D Pressure on the material: 1500 bars Screw speed: 150 RPM CLOSING UNIT Closing force: 450 kN Opening stroke: 375 mm Mini /Max Mold Thickness: 175 mm Max distance between tray: 550 mm Passage between columns: 320 x 270 mm
Manufacturer Battenfeld Model BK-T 1300 / 630 Year 1995 Machine is in good condition 130 Ton
Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination
Manufacturer : BATTENFELD Model: 100T TM 1000 / 525 Year of manufacture: 2000 Screw diameter: 40 mm Closing force: 1000 kN
INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 169 cm³ Pressure on the material: 2083 bars CLOSING UNIT Closing force: 1000 kN Mini /Max Mold Thickness: 250-600 mm Passage between columns: 470 x 420 mm EQUIPMENT PROCESS B 6 EUROMAP 67 1 Core Central ejection
INJECTION UNIT Screw diameter: 85 mm Calculated injection volume: 2128 cm³ Length / diameter ratio: L / D Pressure on the material: 1624 bars CLOSING UNIT Closing force: 4500 kN Opening stroke: 950 mm Mold thickness Mini / Max: 970 mm Passage between columns: 900 x 800 mm EQUIPMENT Extended press for a mold thickness of 970 mm and opening of 950 mm UNILOG B4 command
Battenfeld HM 300/2250 Year: 2009 Type of control: Unilog B6S Number of hours: 17,463H Closing Closing force: 300 T Opening stroke: 900 mm Between columns: 1030 x 1100 mm Mini/maxi mould: 225 mm Max gap between trays: 1125 mm Injection: Screw diameter: 65 mm cm3: 1078 Bars: 2075 General: Motor power: 46kw Heating power: 26.6kw Weight: 14.6T Dimensions length: 6.18 m Dimensions width: 2.5 m Dimensions height: 2.3 m Options: Cores: 3 Robot interface: YES Bi metal: YES Others: 1 BLOWER
Battenfeld TM-5504500 Injection moulding machine Year 2007 Dimensions of plates and columns : 900 900mm Min. mould dim. / Max. Mould dim. : 400 mm / 720 mm Stroke of Opening : 860mm MOTOR KW / TOTAL KW 55kw / 75kw
TM 2500/750 Plastic Injection Molding Machine 250 tons Width between columns 57cm, height 55cm Brand: Battenfeld Year : 2000
TM 2700/1330 Plastic Injection Molding Machine 270 tons Width between columns 64cm, height 62cm Brand: Battenfeld Year : 2004
TM 1600/1000 Plastic Injection Molding Machine 160 tons Width between columns 53cm, height 50cm Brand: Battenfeld 2000 model
Battenfeld TM 1300/750 injection moulding machine 130 tons Width between columns 47cm, height 46cm Brand: Battenfeld 2000 model
Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, temperature control card, amplifier card -Electronic module: from Battenfeld injection molding machine -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 115/80/H50 mm -Weight: 0.2 kg
Safety door monitoring, safety gate monitoring -Manufacturer: Battenfeld, safety gate monitoring safety gate monitoring from injection molding machine -Type: SG 24 mR -Dimensions: 120/120/H200 mm -Weight: 0.8 kg
Control unit, control panel, control panel, control unit, keyboard, screen, control, handheld terminal -Manufacturer: Battenfeld, control unit from injection molding machine BA-T2400 -Dimensions: 380/120 / H85 mm -Weight: 1.7 kg
Injection molding machine -Closing force: 25 to -Screw diameter: 22 mm -Control Unilog 2040 -Spar distance: 250x250 mm -Data collection terminal -Parts removal device make ASS -Temperature control device make Single
Control panel, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press -Hydraulic control block comes from: an injection molding machine -Manufacturer: Battenfeld -Dimensions: 380/180/H300 mm -Weight: 17 kg
Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display, linear encoder, linear encoder -Length measuring device: from injection molding machine Battenfeld BA-T2400, 2 pieces -Measured length: approx. 950 mm -Price / sale: complete -Dimensions: 1060/35 / H85 mm -Weight: 4 kg / pc.
The injection molding machine is fully operational, it is constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 35,000 h.
