Üretici:
(kategori: 102)
turning length: 4.500 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 5.200 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500equipped with a turret for driven tools as well as NC steady rest and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MCT4500 | N40MCTThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 - 900 mmturning diameter over slide rest: ? mmturning length: 1000 - 1500 mmtotal power requirement: ? kWweight of the machine ca.: tdimensions of the machine ca.: mFree at short notice due to current company resolutionIn use until the endUntested, wear and tear due to age and useMachine package 5 x lathe2 x CAZENEUVE HB 5001 x WEISSER Junior1 x SCHAERER UD 630 x 15001 x ERNAULT SOMUA HN 500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turlama çapı: 250 mm torna uzunluğu: 555 mm Kontrol: FANUC 18i-TB mil dönüş hız aralığı: 50-4500 + 5000 U/mintaret başlığı: 2x 24 12 angetriebenBoyutlar (L/W/H): 8000 x 2300 x 2400 mm Makinenin ağırlığı yaklaşık 7.5 tY- ve B- eksenlerÇeşitli aksesuarlar hakkında daha fazla detay www.marcels-maschinen.ch Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.
spindle passage: 375 mmturning diameter over bed: 1030 mmturning length: 1750 mmspindle bore: 375 mmmax. turning diameter: 650 mmspindle turning speed range: 5- 500 U/minspindle motor: 45 / 37 kWControl: OSP P300 L x-travel: +330 / -140 mmz-travel: 2040 mmrapid traverse x + z axis: 5 / 10 m/mintail stock: tailstock quill diameter: 180 mmtailstock quill stroke: 200 mmtaper in tailstock MT: MT 6 total power requirement: kWweight of the machine ca.: ca 23 tdimensions of the machine ca.: 7,1 x 3,2 x 2,85 mCnc Oil Country LatheCNC-controlled oilfield latheFor heavy-duty machining of large and heavy turned parts andpipe end machining- CNC Control OSP P300L- Front and Rear CHUCK: SMW Autoblok 3 - jaw Chucks (both 850mm dia.)- Tool Revolver 12-fold (static Tools)- Chip Conveyor- ExhausterPower on: 20.538h , N/C Running Time: 2.270hSpindle Revolution Time: 2.287h, Cutting Time: 1.691hThe data ...
Torna çapı: --- mm dönüş uzunluğu: --- mmkontrol: --- toplam güç gereksinimi: makinenin --- kW ağırlığı ca.: --- makinenin boyutları ca.: --- mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
faceplate diameter: 6300 mmswing diameter: 7000 mmturning height: mmram adjustment: mmcross rail adjustment - vertical: mmram head - cross travel: mmram swivable +/-: °main drive: kWtable revolutions:: 0 - 14 U/mnworkpiece weight: 75 /125 tram head dimension: mmtotal power requirement: 170 kWweight of the machine ca.: 120 tdimensions of the machine ca.: 10 x 10 x 7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
yatak üzerinde dönüş çapı: 500 mmkızak üzerinde dönüş çapı: 320 mmtornalama uzunluğu: 2100 mmmerkez yüksekliği: 250 mm: mmiş mili çapı: 60 mmiş mili dönüş hızı aralığı: 11 - 2000 U/daktoplam güç gereksinimi: 7,0 kW makine ağırlığı yaklaşık: 2,9 t makine boyutları yaklaşık: 4,3 x 1,2 x 1,3 mmTorna tezgahları:- 4 konumlu takım direği - 3 çeneli ayna 315 mm- Merkezleme noktasıBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
turning diameter: 460 mmturning length: 795 mmcontrol: MORI SEIKI M730 BM Swing diameter face slide: 590/360 mmspindle passage: 80 mmTraverse X/Z:: 260/795 mmNumber of working hours: 19.552 hCutting time: 10.704 hspindle drive: 18,5 kWtotal power requirement: 40 kVAweight of the machine ca.: 6,4 tdimensions of the machine ca.: 3.994 x 3.056 x 2.187 mChip chuck Ø250 mm.Chuck sub-spindle Ø170 mm.Holder HAINBUCHchip conveyorsuctionBar feeder Hydrafeed Multiservo mod MSVmax. bar length 1,600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Yatak üzerinde dönüş çapı: 460 mmTornalama uzunluğu: 1250 mmMerkez yüksekliği: 230 mmMerkez mesafesi: 1250 mmİş mili dönüş hızı aralığı: 35 - 1800 U/dakMakine ağırlığı yaklaşık: 2,7 tAksesuarlar: 3 çeneli ayna 250 mmø, 3 uçlu MULTIFIX kafası, sağlam sabitBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
Yatak üzerinde dönüş çapı: 360 mmSürgü desteği üzerinde dönüş çapı: 180 mmDönüş uzunluğu: 900 mmDönüş hızı aralığı: 25 - 1600 U/daktoplam güç gereksinimi: yaklaşık 3 kWMakine ağırlığı yaklaşık: 1,5 tMakine boyutları yaklaşık: 2,5 x 1 x 1,5 mBu ilana ilişkin veriler LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
turning diameter: 340 mmturning length: 600 mmturning diameter over slide: 300 mmcontrol: Siemens 840 D spindle passage: 55 mmspindle nose: ASA 6 number of spindle speeds: 4000 U/minspindle motor: 27 kWNumber of tools: 12 VDI 40driven stations: 12 VDI 40speed of driven tools: U/minpower of driven tools: kwrapid traverse: 30 m/minSpindlespeed subspindle: U/minpower sub spindle: 15 kwrange L-W-H: mweight of the machine ca.: tCNC- lathe with driven tools an subspindleDriven toolstation cannot be used due to cable breakage- chip conveyor- sub spindle- driven tool stations (not working)- tool measuringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dönüş çapı: 200 mmDönüş uzunluğu: - mmkontrol: Hasar toplam güç gereksinimi: kWMakinenin ağırlığı yaklaşık: 5200 kgMakinenin boyutları yaklaşık: mBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
Dönüş çapı: 246 mmDönüş uzunluğu: 445 mmkontrol: Fanuc 32 toplam güç gereksinimi: kWMakinenin ağırlığı yaklaşık: 4250 kgMakinenin boyutları yaklaşık: mBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
turning diameter: 830 mmswing diameter: 920 mmturning height: 750 mmcontrol: Fanuc 0i-TF travel -x axis: 495 mmtravel -z axis: 780 mmturning speed range - spindle: 1940 U/mindrive capacity - spindle motor: 37 / 30 kWchucking diameter: 380 mmturret (x-stations): 12 posrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 20 m/minfeed: mm/minspindle diameter in front bearing: 160 mmc-axis: 360° (in 0,001°) workpiece weight: 870 kgtotal power requirement: 61,78 kVAweight of the machine ca.: 9,5 tdimensions of the machine ca.: 2,1 x 2,7 x 3,6 m- Control unit FANUC 0i-TF- Tool Turret 12-fold- Coolant system- Foot switch- Automatic safety switch Front door & full enclosure- Work area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1220 mmturning length: 5000 mmcontrol: FAGOR 8055 TC turning diameter over slide: 880 mmturning diameter over bed: 1220 mmtail stock: M80 tailstock quill diameter: 180 mmtailstock quill stroke: 260 mmspindle turning speed - stepless: 0 - 1000 U/minspindle motor: 40 kWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mcomplete retrofit in 2020- CNC Control Fagor 8055 TC- Tool holder turret:SAUTER model 0.5.320.025, vertical axis- Chip Conveyor- 4-jaw chuck Ø1000 mm- 3-jaw chuck Ø500 mm- Steady Ø500 mm- Movable bezel Ø250 mm- Special bar for machining very long interiors- CoolantRETROFITTING IN 2020• Grinding of carriage guides on the X and Z axes• Preloading of X and Z axis ball screw nuts• New Turcite placed on the X and Z axis carriages• General review and disassembly of the engine and head regulator• General review ...
ön panel çapı: 5500 mmDönüş çapı: 6000 mmDönüş yüksekliği: 4400 mmTornalama hızları: - U/minana tahrik motoru: - kWControl: FAGOR 8055 iş parçası ağırlığı maks.: 100 tramvay stroku her iki tarafta: 1500 mmçapraz ray - ayar: 3000 mmtoplam güç gereksinimi: - kWmakinenin ağırlığı yaklaşık: - tmakinenin boyutları ca.: - mdonanımlı:- CNC Control 8055- Kiriş üzerinde 1ramBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
faceplate diameter: 2950 mmswing diameter: 3200 mmturning height: 3500 mmturning speeds: U/minmain drive motor: 70 kWControl: FAGOR 8070 workpiece weight max.: 20 tcolumn daylight: 3300 mmmilling motor: 16 kWfeeds crossrail-slide vertical: 3000 mm/minfeeds crossrail-slide horizontal: 3000 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mequipped with:- CNC Control FAGOR 8070- C-axis (angular positioning of the table)- angular milling Head- Telescopic covers of the cross rail and columns guideways- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dönüş çapı: mmTornalama uzunluğu: 300 mmYatak kızağı üzerinde dönüş çapı: mmToplam güç gereksinimi: kWMakinenin ağırlığı yaklaşık: 0,4 tMakinenin boyutları yaklaşık: mBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
Dönüş çapı: 950 / 650 mmTornalama uzunluğu: 2000 / 2500 mmkontrol: HEIDENHAIN Manual Plus 3 çeneli ayna çapı: 800 mmTornalama hızı aralığı: 40 - 1000 U/daktoplam güç gereksinimi: 35 kWMakine ağırlığı yaklaşık: 12 t Makine boyutları yaklaşık: 8 x 3 x 3,5 m12 x istasyon TaretPunta2 x Talaş KonveyörleriFiyat EXW 17036 NeubrandenburgBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
