Üretici:
(kategori: 102)
turning diameter: 12,7 mmturning length: 50 mmcontrol: Traub System TX 8i turning speeds: 12000 U/minc-axis: 0,001° gripping station: 12,7 mmc-axis: 0,001 °speeds: 12000 U/minrapid traverse: 15 m/minturret (x-stations): 6 worktool system: 5+3 worktool system: 3 Werkzeugsysteme total power requirement: 2,5/4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,4 x 1,1 x 1,7 mdriven tools: 6+4+4 Rev+S7+S8CNC turning machine Traub TNL 12K with barloader LNS Tryton 112Motor drive S8 (rear working with driven tools possible)Motor drive S7 (front working with driven tools possible)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 0 mmturning diameter over slide rest: 900 mmturning length: 1.000 mmtotal power requirement: 25 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mHeight of centres 550 mmMax. turning Æ 1200 mmMax. turning Æ over slides, approx. 900 mmMax. turning length, approx. 1000 mmSpindle bore, approx. 90 mm24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/minTotal load, approx. 25 kW - 380 V - 50 HzWeight, approx. 8000 kgAccessories/specialitiesTwo separate slides, each equipped with 2-coordinate copyingequipment, program controlled by plugboard, strengthened bearingsand spindle, hardened an ...
serial number: 31302 control: Fanuc with double spindles: x turning diameter: max. 600 mmx-travel: 1000 mmwith magazine: x extensive accessories: ca. 100 Aufnahmen, auch angetriebenweight of the machine ca.: 13 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja : VDI 20 : number: 3 Stück im Paket : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1000 mmturning diameter: 350 mmturning dia. in gap: 450 mmspindle bore: 40,0 mmturning speeds: 70 - 2000 U/minbed width: 180 mmspindle taper: 55029 D 1-4taper in tailstock: 3 MKquill travel: 110 mmtotal power requirement: 1,5 kWweight of the machine ca.: 529 kg.range L-W-H: 1730x700x1340 mmScope of delivery:- 3-axis digital display i200 with LCD display- 3-jaw chuck DK11-160 mm / D4- Face plate 200 mm / D4, according to DIN 55029- Fixed steady rest - passage diameter max. 60 mm- Follow-on steady rest - passage diameter max. 60 mm- Clamping plate 250 mm- Quadruple tool holder- Shaft fixing device- Protection device for tool holder- Slip clutch- Micrometer longitudinal stop- Coolant device- Extendable chip tray- Frequency converter- Foot pedal with brake function according to CE- Splash guard- Thread gauge- LED machine light- Digital speed display- Reducing sleeve- Change g ...
: gefült mit 43 Aufnahmen height: 2.200 mmwidth: 1.200 mmweight of the machine ca.: 300 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1000 mmturning diameter: 330 mmturning dia. over face-slide: 198 mmturning dia. in gap: 476 mmspindle bore: 38.0 mmturning speeds: 70 - 2000 U/minbed width: 180 mmspindle taper: DIN ISO 702-2 Nr. 4taper in tailstock: 3 MKquill travel: 110 mmtotal power requirement: 1.5 kWweight of the machine ca.: ca. 610 kg.range L-W-H: 1930 x 755 x 1300 mmFeatures- Ideal for technical schools, repair shops, and training workshops- Modern main spindle bearing assembly with precision-grade angular contact ball bearings- Single-lever chuck for the tailstock, adjustable for taper turning- Hardened and ground gears and shafts in the gearhead- Optimally suited for machining steel, non-ferrous materials, and plastics- Removable bridge for machining workpieces with large. diameters- To minimize the effects of vibration, the solid prismatic bed. is additionally equipped with ribs- The speed and ...
centre height: 620 mmhollow: max. 400 mmweight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1000 mmturning diameter: 210 mmswing diameter over bed slide: 300 mmcentre height: 167 mmspindle bore: 40 mmbed width: 210 mmturning speeds: 40 - 2500 U/mintotal power requirement: - kWweight of the machine ca.: 1000 kg.range L-W-H: 2000 x 1000 x 1700 mmFeatures:- Digital display- 3-jaw chuck- Chuck guard- Multifix quick-change tool holder- Chip deflector- Chuck guard- Coolant system- Bed stop- Instruction manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck ...
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck- ...
turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 360 mmcentre height: 180 mmturning speeds: 70-2400 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 2000x1500x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- Emergency stop button- Operating instructionsThe data for this ad was created with M ...
turning diameter: 42 mmturning length: 250 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC-lathe with bar feedwith Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 250 mmturning length: 450 mmcontrol: TX8D bore: 80 mmspindle speed:: 3150 U/min.CNC Lathe with Bar Feed and 3 TurretsVery large spindle bore, with bar loading devicePlease ask for further details.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 120 mmspindle bore: 20 mmcopying device: ja kWweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 100 mmturning length: 100 mmMain Spindle:: spindle motor: 7,5 / 11 kWspindle passage: 42 mmcollet diameter: DIN 173E (A5) spindle turning speed range: 6000 U/minrapid traverse: 30 m/mintravel x / y / z: 300 / 770 / 250 mm2nd Spindle:: spindle motor: 2,2 / 3,75 kWspindle passage: 30 mmdia. of draw-in collets: DIN 173E (A5) mmspindle turning speed range: 6000 U/minrapid traverse: 30 m/mintravel x / y / z: 900 / 770 / 300 mmcontrol: Mitsubishi M830 tool taper: ER 20 total power requirement: kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 3,8 x 2,2 x 2 mSimultaneous machining on the main and counter spindles- Mitsubishi M830 CNC control with electronic handwheel- Main and counter spindles-- each with C- and Y-axes-- 173 E collet chuck (A5)- Swivel head (B-axis 0–360° in 0.001° increments) on the main and counter spindles- 36 tools (24 of which are dr ...
: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: max. 750 mmturning length: 3.500 mmturning length: Standard: 3.071 mmcontrol: Sinumerik 840 D SiemensWorking height: 1.300 mmaxis stroke:: x-travel: 435 mmz-travel: 3.071 mmmax. workpiece weight between centers: 2.000 kgMain spindle:: turning speed range - main spindle: 10 - 3.000 min/-1power capacity - main spindel: 61,2 / 195 kWmax. Torque: 779 Nmspindle head: A 11 DIN 55026spindle diameter in front bearing: 180 mmSubspindle:: Spindle speed range subspindle: 10 - 3.000 min/-1power capacity - Sub spindle: 73 / 233 kWmax. Torque: 932 Nmspindle head: A 11 DIN 55026spindle diameter in front bearing: 180 mmTurret 1:: U-axis: min. -5 - max. 430 mmw-axis: min. 276 - max. 3.347 mmtool taper: VDI 50 number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tool stations: max. 3.000 min -1power capacity - driven tool-stations: 9,7 kWTorq ...
turning diameter over bed: 350 mmturning diameter over slide rest: 216 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 40 - 1800 U/mincentre height: 170 mmspindle bore: 40 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 2,0 x 0,85 x 1,6 mCentre lathe (lead screw and feed rod)- Digital readout- 3-jaw chuck (160 mm)- Spare jaws- Coolant system- Multifix tool post- 4 Multifix tool holders- Steady rest- Live centre- Chip tray- Chuck guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 390 mmturning length: 2250 mmcontrol: Sinumerik 840D swing diameter: 610 mmcross movement. (x-axis): 605 mmlongitudinal traverse (z-axis): 1.870 mmy-axis: 210 mmb-axis: 240 °Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mmLongitudinal travel (Z3): 1.840 mmmain spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: max 82 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 82 mmDiameter in front bearing: 180 mmCounter spindle: - clamping chuck diameter: 250-315-400 mmbar material dia.: 92 mmspindle head: Ø 220H5 spindle bore: Ø 118 mmClamping tube inner diameter: 104 mmDiameter in front bearing: 180 mmMain spindle drives left and right: - power requirement: 45/47 kWspeed area: 20 - 3.200 1/minBuckling speed: 650 1/mintorque: 650/ 1.080 NmC-axis speed: 3.200 1/minTorque C-axis: 660 1/minPartial accuracy C-axis: 0,025 ° ...
dönme çapı: - mm dönüş uzunluğu: - yatak kaydırması üzerinde mmsalınım çapı: - mmtoplam güç gereksinimi: - makinenin kW ağırlığı ca.: makinenin boyutları ca.: mBu reklam için veri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
dönme çapı: - mm dönüş uzunluğu: - yatak üzerindeki salınım çapı: - mmtoplam güç gereksinimi: - makinenin kWweight ca.: - makinenin boyutları ca.: - mBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
control: FANUC 18i TB turning diameter: 280 mmturning length: 400 mmc-axis: indexing: 0.001 °turning speeds: -6000 U/mintool taper: DIN ASA A2-5 Top turret tool hodler:: 12 rapid traverse X-axis: 24 m/minrapid traverse Z-axis: 30 m/minOverall size: 5000 x 2000 x 2600 mmweight of the machine ca.: 6300 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Kontrol: FANUC 0i TC turlama çapı: 520 mm dönüş uzunluğu: 1090 mm dönüş hızı: -3500 U/minÜst turret aleti hodler:: 12 hızlı dönüş X ekseni: 20 m/mina hız dönüşü Z ekseni: 24 m/dakika Genel boyut: 3000 x 1800 x 2000 mm makinenin ağırlığı yaklaşık 6 tBu reklamın verisi, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.
kontrol: FANUC 21i TB turlama çapı: 355 mm dönüş uzunluğu: 1330 mmc ekseni: indeksleme: 0.001 dönüş hızı: -2800 U/mintool konik: BMT 65 Üst taret aleti hodler:: 12 hızlı dönüş X ekseni: 16 m/dakika dönüş Z-ekseni: 24 m/dakika Genel boyut: 4000 x 2000 x 2100 mm makinenin ağırlığı ca.: 6700 tBu reklam için veri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.
control: GE Fanuc Series 21i-T Distance between centres: 5000 mmcenter bore: 425 swing over bed: 850 mmbed width: 425 mmrapid feed: 10000 mm/minworking feed: 7000 mm/minmain spindle bore: 85 mmMain spindle: DIN 55027-n°8 taper: 5 spindle speeds: 0-2000 U/minSpindle power: 11 KWtailstock quill diameter: 96 mmtailstock travel: 215 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 7.300x1.700x1.900 mSupport Guides 2Swing over cross carriage 560 mm.Automatic ranges 2Turret type AutomaticTurret positions 8Hydraulic tailstock quill stroke INCLUDEDTailstock taper MORSE 63 Jaw Auto-centering hydraulic chuck Ø 300 mm. INCLUDED4 support steady rest Ø 450 mm. INCLUDED3 support steady rest Ø 250 mm INCLUDEDChuck protection INCLUDEDComplete rear protection INCLUDEDDual handwheel for carriage control INCLUDEDFoot pedals for hydraulic chuck opera ...
turning diameter over bed: 1930 mmturning diameter over slide rest: 1520 mmturning length: 5000 mmturning speeds: 0,5-250 U/minspindle bore: 105 mmworkpiece weight: 35 tsteady: 400-700 mmsteady: 700-1200 mmsteady: 1000-1600 mmcontrol: Siemens total power requirement: 106 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamTh ...
centre distance: 1000 mmturning diameter over bed: 420 mmturning diameter over bed slide: 235 turning length: 1000 mmspindle taper: DIN 55027 Gr. 6control: MANUALPlus 4110 spindle bore: 51 mmturning speed range: 3 - 3000 U/minfeed:: 5.000/10.000 mm / mindrive capacity - spindle motor: 11 kWtaper in tailstock-quill: MK 4 dia. of quill: 70 mmquill stroke: 110 mmcoolant: ja/yes voltage: 400 VNumber of working hours: 6.908 hweight of the machine ca.: 3 tdimensions of the machine ca.: 3,4 x 2 x 2,2 mBOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006-Control system: Heidenhain ManualPlus 4110-11 kW AC main drive with 2-stage gearbox-Work area cover with chip guard door-Control panel mounted on the support, moves with the machine-Holding brake-Programmable cycles-4-position quick-change turret-Size 2 tool holder on fixed base-With 1 WD ‘/25’ tool holder-Tailstock-Rapid traverse ...
turning diameter: 65 mmturning length: 150 mmcontrol: Siemens 840D spindle passage: 75 mmturning length: 150 mmc-axis: 2x 0,001 °gripping station: 65 mmspeeds: 5000 U/minrapid traverse: 30 m/minturret (x-stations): 3x12 Number of axles: 10 St.number of toolholder-holes: 36 chip conveyor: ja / yes kWcoolant filtering unit: ja / yes kWNumber of working hours: 35000 htotal power requirement: 22 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca mbar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles,3 turrets with Iemca Master 880 loading magazineAccessories:a large number of tool holdersin total 104 off, 24 of them are driven tool holderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
