Bant testere otomatikleri

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme  ...

cutting diameter: 250 mmsaw band length: 3505 x 32 x 0,95 mmcutting width: mmControl: total power requirement: 8 kVAweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1937 x 1850 x 1570 mmNC-controlled band saw machine for series cuts with differentlengths and quantities for all materials.Technical data:Cutting capacityCutting diameter 250 mmBelt speed 24 - 90 m/min. - steplessSaw band dimensions 3505 x 32 x 0.95 mmBelt drive 3.7 kWTable height 550 mmEquipment:Chip conveyorCoolant deviceRunwayOperation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 245 x 150 mmcutting speed: 45/90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 90 mm: 90 mm: 145 mmImpact energy: 145 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,2 tdimensions: 1,43 x 0,72 x 1,7 m- Miter cuts up to 60 ° left-Vise with quick release device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mmdimensions of saw-band: 2480 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic band saw Bauer S260 Year of construction: 1995 Manufacturer: Bauer Germany S/N 69-1120 with additional runway Specifications Cutting diameter 260 mm Saw blade length 3660 x 25x 0.9 mm Cutting width 320 x 240 mm Motor 0.75 kW Cutting range at 90° round 260 mm flat 450 x 240 mm Cutting range at 45° round 230 mm flat 240 x 200 mm Hydr. raising + lowering the saw frame Conventional governance Cutting pressure infinitely variable 0 - 10 m/min Total drive power 400 V / 0.8 kW Coolant device Dimensions: 2010 x 850 x 1110 mm Weight approx. 800 kg

cutting diameter: 300 mmsaw band length: 4640x41x1,3 mmcutting width: 300 mmcutting speed: 19-130 m/mintotal power requirement: 7 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,3x2,3x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 15 - 300 mmsaw band length: 4640 mmcutting width: 1,3 mmcutting range - square -: 300 x 300 mmfeed length: 600 mmfeed length: multiple: 5400 mmdimensions of saw-band: 4640 x 41 x 1,3 mmcutting speed: 19 - 130 m/minmin. cut-off length: 10 mmheight of material-table: 700 mmtotal power requirement: 7 kWweight of the machine ca.: 2,7 tdimensions of machine L x W x H: 2,35 x 2,34 x 1,95 mAccessories: chip conveyor, DRO for cutting length, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Sawing area 90° round: 300 mm 90° flat: 300 x 300 mm Feed rate: 10 mm Multi-feed: 6000 mm Max. sawing speed: 0 - 115 1/min Dimensions (WxDxH), approx.: 2580 x 2300 x 1850 mm Equipment: -Conveyor - Coolant device - Emergency stop push button

serial number: 0392212 cutting diameter: rund max. 430 mmcontrol: mit Massenspeicher stroke max.: 10 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 670 mmsaw band length: 8800 mmcutting width: 1,6 mmband speed: 16 - 100 m/mintable load: 15 ttotal power requirement: 18 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mAutomatic band sawBehringer HBP 650 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mmsaw band length: 5200 x 41 x 1,3 mmcutting width: 470 mm: 460 mmCapacity 90° rectangular: 470 x 460 mmcutting speed: 20 - 100 m/mintotal power requirement: 5,2 kWweight of the machine ca.: 1,66 tdimensions of the machine ca.: 3,1 x 3,1 x 1,8 mFully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The machines ar ...

cutting diameter: 560 mmsaw band length: 6000 x 41 x 1,3 mmcutting width: 570 mm: 560 x 560 mmCapacity 90° rectangular: 570 x 560 mmspeeds steplessly adjustable: 20 - 100 m/mintotal power requirement: 6,0 kWweight of the machine ca.: 2,24 tdimensions of the machine ca.: 3,5 x 1,05 x 2,05 mFully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automat ...

: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mPROMOTIONAL PRICE2-column high-performance automatic band saws from the SBS seriesThe SBS series impresses with its sophisticated technology, high quality and longevityand unrivaled, sophisticated standard equipment.• Modern SNC 20 control for CNC version• Frequency-controlled saw drive• Control buttons with pictograms• Work light• Powered chip brush• Hydraulic belt tension• Clamping pressure regulation• Double vice (before and after the belt)• Creep path for positioning• Bundle tension prepared electrically and hydraulically• Chip conveyorThe SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. W ...

cutting diameter: 380 mmsaw band length: 4570 x 42 mmcutting width: 380 mmband speed: 15 - 120 m/min: 380 mm: 380 mm: 380 x 400 mmtotal power requirement: 5,6 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 2600 x 2600 x 2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 saw band length: 8140x54x1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,96 tdimensions of the machine ca.: 5,7 x 4,0 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mmcapacity 90 degrees: square: 480 mm: 610 x 450 saw band length: 5320 x 34 x 1,1 mmband speed: 15 - 100 m/mintable height: 820 mmtotal power requirement: 3,0 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,65 x 2,8 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 saw band length: 5850 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,45 tdimensions of the machine ca.: 5,85 x 3,6 x 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 mmcapacity 45 degrees: round: 680 mmcapacity 45 degrees: square: 600 mmcapacity 45 degrees: flat: 870x600 mmcapacity 60 degrees: round: 580/550 mmcapacity 60 degrees: square: 530/450 mmcapacity 60 degrees: flat: 550x450 mmsaw band length: 8140 x 54 x 1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,3 tdimensions of the machine ca.: 5,75 x 4,2 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 330 mm: 330 mm: 400x330 mmsaw band length: 4570 x 34 x 1,1 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 2,35 tdimensions: 2,23 x 2,15 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 460 mm: 460 mm: 460 x 460 mmsaw band length: 5450 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,2 tdimensions: 2,675x 2,15 x 2,05 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 550 mm: 550 mm: 550 x 550 mmsaw band length: 5980 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,8 tdimensions: 3,0 x 2,15 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 310 mm: 310 mm: 340 x 310 mmsaw band length: 3730 x 34 x 1,1 mmtable height: 922 mmband speed: 15 - 100 m/mintotal power requirement: 3,0 kWweight of the machine ca.: 1,65 tdimensions: 1950x1755 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

cutting diameter: 1020 mmsaw band length: 9500 mmcutting width: mmControl: total power requirement: 7,5 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 4500 x 1700 x 2750 mmBrand: BMSYType: 1020CYear of make: 2019Capacity round 90º: 1.020 mm øCapacity square 90º: 1.020 mmCapacity rectangular 90º: 1.020 x 1.020 mmMitre: 45 °Working height: 535 mmSaw blade dimension: 9.500 x 54 x 1,6 mmSaw motor: 7,5 kWMachine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mmMachine weight: 6.950 kgClamp: 1 x 45 ° adjustableHydraulic clamping including top clampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mmsaw band length: 8200 mmcutting width: mmControl: total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4020 x1630 x 2570 mmBrand: BMSYType: 810 CGHYear of make: 2019Capacity round 45º: 555 mm øCapacity round 60º: 320 mm øCapacity round 90º: 810 mm øCapacity square 45º: 700 mmCapacity square 60º: 310 mmCapacity square 90º: 770 mmCapacity rectangular 45º: 555 x 770 mmCapacity rectangular 60º: 310 x 770 mmCapacity rectangular 90º: 810 x 770 mmMitre: 60 °Saw blade dimension: 8.200 x 41 x 1,3 mmSaw speed: 20 - 100 m/minSaw motor: 4 kWMachine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mmMachine weight: 3.970 kgCap. 30 ° round: 700 mm øCap. 30 ° straight: 700 x 770 mmCap. 30 ° square: 700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic Band Saw BOMAR Maxi diameter: Ø 250 mm Hydraulic clamping of the chuck Straight and angular cut Automatic descent Possibility to work manually or auto 2 rotation speeds of the blade Lubricant pump Voltage: 380 V Length: 2000 mm Depth: 1800 mm Total height: 1800 mm Weight: approx 1,5 T

cutting diameter: 320 mmsaw band length: 4335 x 32(34) x 1,1 mmcutting width: mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,27 tdimensions of the machine ca.: 2,4 x 1,750 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmcapacity 90 degrees: flat: 470 x 320 mmcapacity 45 degrees: round: 320 mmcapacity 45 degrees: flat: 300 x 320 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: flat: 190 x 320 mmsaw band length: 4335 x 32(34) x 1.1 mmcutting speed: 20 - 90 m/mintotal power requirement: 2,53 kWweight: 1296 kgrange L-W-H: 2400 x 1506 x 2000 mmFurnishing:- stepless speed adjustment of the saw band- Handwheel for saw band tension- stable machine stand in welded construction- Rotary table for miter adjustment- Fast / precise setting of the miter areas- Quick release material- Material support table with circumferential water channel- clear control panel for electrical and hydraulic central control- coolant device- Required instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 3800x5000 mmdimensions: 3000x1200x1100 mmweight: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 3660 x 27 x 0,9 mmtable height: 650 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 300 mmcapacity 45 degrees: round: 280 mmcapacity 45 degrees: square: 200 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: square: 140 mmcutting speed: 15-105 m/mintotal power requirement: 1,2 kWweight of the machine ca.: 630 kgdimensions of the machine ca.: 2000 x 1300 x 1030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1200 mm, 1510 mm

Danobat band sawing machine with cutting area 1510 x 1200 mm. Automatic feeding, max. roller conveyor load 30000 kg. Dismantling and loading free of charge by truck is possible at low cost. Installation and commissioning on request.

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

cutting diameter: max. 250 mmfeed:: . accessories:: Ersatzbänder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

Note: General overhaul of the machine in 2020

Key data: 320 mm, 4700 mm, 500 mm

Metal band saw machine in good condition YOC 2009 Ready for immediate use at call The HBA 500 S i has a stable 2-column construction and is characterized by the best cutting performance and simple and clear control. The highest level of precision and safety is guaranteed. Thanks to the extensive range of accessories, these models can be upgraded to a machine for highly demanding automatic saws. Working range, cutting quality and performance make the HBA 500 S a top model. Standard accessories: Control DP 100 with 7" touch screen, carbide guides, motor-driven chip brush, hydraulic cutting pressure adjustment, reinforced saw frame, 34 mm band saw technology, coolant system, integrated roller conveyor 1200 mm Saw blade dimensions 4400 x 34 x 1.1 mm Weight: 2400 kg Dimensions LxWxH2200x2400x2100 mm Working height 650 mm Cutting speed15-105m/min Infinitely variable f ...

cutting diameter: 355 mmdimensions of saw-band: 3770 x 34 x 1,1 mmcutting speed: 20 - 80 m/mincutting width: 490 x 280 mm: 290 mmImpact energy: 250 mm: 230 mm: 180 mmconnected load frequency: 400 Volttotal power requirement: 2,2 kWweight of the machine ca.: 0,7 tdimensions: 1,43 x 0,72 x 1,7 mSemi-automatic miter band saw- Miter cuts up to 45° left + right- Miter cuts up to 60° right- Vice with quick release device- Tape tension control via manometer- Electr. automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

offer 22492 Specifications: - Cutting range at 90° approx. 280 mm - flat 410 x 200 mm - Cutting range 45° approx. 230 mm - flat 245 x 210 mm - Band saw blade dimensions 3660 x 25 x 0.9 mm - Material replenishment machine - Cutting speeds infinitely variable 17 to 106 m/min - Hydr. raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.1 kW - Coolant device - Stop 1000 mm - Space requirement approx. W 2000 x H 1200 x D 1000 mm - Weight approx. 380 kg

cutting diameter: 230 mmsaw band length: 2730 x 27 mmcutting width: 0,9 mmcapacity 90 degrees: flat: 320 x 130 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: flat: 230 x 100 mmcutting speed: 35 - 70 m/mincutting angle: + - 45 °hydraulic motor: 0,37 kWcoolant pump: 0,12 kWsawing motor: 1,5 kWtotal power requirement: 2 kWweight of the machine ca.: 440 kgdimensions of the machine ca.: 1,4 x 0,9 x 1,3 mSetting of the saw pressure by hydr. cylinderCooling device,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 350 mmsaw band length: 4160 x 34 x 1,1 mmcutting width: 350 mmcutting capacity - flat: 400 x350 / 90° mmcutting capacity - flat: 290 x 300 / 45° mmcutting capacity - flat: 400 x 350 / 30° mmcutting capacity - round: 350 / 90° mmcutting capacity - round: 320 / 30° mmcutting capacity - round: 320 / 45° mmfeeds - fine adjustment: 20-100 mmhydraulic motor: 0,37 kWcoolant pump AC: 0,12 kWdrive motor: 2,2 kWtotal power requirement: 2,7 kWweight of the machine ca.: 1,05 tdimensions of the machine ca.: 2100 x 1300 x 850 mAccessories :automatic sawing functions, hydraulic clamping, material feed viadriven rollers, pneum. adjustable lowering speed,sawing programs adjustable via touch screen,EU quality and CE standards,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 230 mmcapacity 90 degrees: square: 230 mm: 280 x 150 band speed: 35/70 m/minsaw band length: 2770 x 27 x 0,9 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 kgDimensions (LxWxH): 1,5 x 1,2 x 1,3 0Band saw including micro spray deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Store number: 3418 BANDS�GEAUTOMAT Manufacturer: IMET, Type: X-TECH 410 Machinen NR.: 033476001, Built: 2003 Specifications: Size sawing capacity dia. 410 mm Total output 5.5 kW Hydraulic. CNC control. Saw male 6150 x 41 x 1.3 Length: 2000 mm, Høhe: 2200 mm, Width: 3500 mm, Weight: 3450 kg

cutting diameter: 260 mmsaw band length: 3660 mmcutting width: 0,9 mmcutting range - square -: 260 x 260 mmfeed length: 500 mmfeed length: multiple: 5.999 mmcutting speed: 17 - 106 m/mindimensions of saw-band: 3660 x 25 x 0,9 mmsawing motor: 1,5 kWtotal power requirement: 2 kWweight of the machine ca.: 1,05 tdimensions of machine L x W x H: 1,75 x 1,80 x 1,15 mAccessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 320 mm, 5350 mm, 320 mm

Horizontal saw with position control Cutting area round: 320 mm Rectangle cutting area: 320 x 320 mm Band saw dimensions: 5250/5350 x 32 x 1.1 mm Belt speed: 15 - 110 m/min Saw drive: 380 V, 4 kW Weight: 2200 kg

cutting diameter: 500 mmcapacity 90 degrees: flat: 800 x 500 mmcapacity 90 degrees: square: 500 x 500 mmcapacity 45 degrees: round: 500 mmcapacity 45 degrees: flat: 530 x 500 mmcapacity 45 degrees: square: 500 x 500 mmcapacity 60 degrees: round: 350 mmcapacity 60 degrees: flat: 350 x 500 mmcapacity 60 degrees: square: 350 x 350 mmsaw band length: 7050 x 54 x 1,3 mmvice: 500 x 800 mmcutting speed: 15 - 100 m/mincoolant tank: 30.0 LiterControl: JAESPA NC height of material-table: 700 mmtotal power requirement: 9.5 kWweight: 3000 kgrange L-W-H: 3200 x 3500 x 2360 mm maintained condition () current new price approx. 90.000 euros Special price on requestFully automatic, NC controlled 2-column band saw machine, for one-sidedMiter cuts up to 60 degrees, for industrial useFor sawing off solid material, pipes and profiles made of steel and cast ironas well as light and non-ferrous metals and simi ...

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

- Cutting speed: 6 - 30 m/min - Saw blade dimensions: 400 (425) x 50 x 5 mm - Cutting range 45° flat: 180 x 40 mm - Cutting range 90° flat: 240 x 70 mm - Cutting range 90° round: 140 mm - Cutting range 90° square: 130 mm - Miter cut: infinitely variable 60 -/+ degrees - Saw blade feed speed: 0 - 1,200 mm/min - Minimum quantity lubricating system: PPS 401 115326 - Autom. Flat magazine FMA for rods: 1500 - 7000 mm - Control: Kaltenbach MULTI-COM - Chip conveyor - Total power: 5.5 kW - Machine weight: 4500 kg - Dimensions (W x D x H): 9.45 x 2.59 x 2.1 m - Power-on hours: 17290 h - Condition: very good details fully automatic universal saw, workpiece stop for inclined cuts to the left and right, work space lighting, section gripper with autom. Adjustment of the front gripper jaw, sorting device with drive, sorting of good parts, very well maintained system acce ...