Üretici:
(kategori: 105)
Uzunluk 6 m E355 konumlandırıcı kontrolörü Testere çapı 420 mm
Uzunluk 5m Seçenekler: Yükle ve boşalt KESME ÜNITELERI EĞIMI IÇIN SANAL EKSEN PROFİL SIKIŞTIRMA ETIKET YAZICISI
Stored in working condition, with 2 new band saws. Auction-ID: A3-46156-17117
roll diameter:420 mmthroat:400 mmworkpiece height:325 mmtable surface area:615 x 615 mmtable swivelabel +/-:10/45 °table - inclinable:+/- 20 °cutting speed:20 - 2500 m/mintotal power requirement:2 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,95 x 0,65 x 1,83 m
saw blade diameter:400 mmcutting diameter:400 mmmaterial:Vollmaterial 20 - 130 mmmaterial:Walzprofile 40 - 120 mmmaterial diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mmsawblade width:4 mmtotal power requirement:5,1 kWweight of the machine ca.:1850 kgdimensions of the machine ca.:3300 x 1630 x 1960 mmDocuments:vorhanden
Cutting height:150 mmsaw band length:2400 mmcutting width:350 mmtotal power requirement:380 Vweight of the machine ca.:350 kgdimensions of the machine ca.:800 x 950 x 1650 mm
saw blade diameter:400 mmtotal power requirement:380 V, 1,7/2,6 kWweight of the machine ca.:850 kgdimensions of the machine ca.:1100 x 1050 x 1620 mm
cutting diameter:260 mmband length:450 x 4 x2 mmtotal power requirement:22,6 kWweight of the machine ca.:1024 kgdimensions of the machine ca.:1500 x 2310 x 955 mmsquare:240 x 240 mmflat material:260 x 180 clamping capacity:40 barDocuments:vorhanden
saw blade diameter:400 mmtotal power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
total power requirement:380V 50 HZ,1,67 kWdimensions of the machine ca.:1,4 x 1,8 x 1,4 m
Milwaukee M18 FCS552-0 Battery circular saw machine. Please note: this product is a body and will therefore be delivered without battery and charger. Auction-ID: A1-40897-371
Milwaukee M18 FCS552-0 Battery circular saw machine. Please note: this product is a body and will therefore be delivered without battery and charger. Auction-ID: A1-40897-275
Milwaukee M18 FCS552-0 Battery circular saw machine. Please note: this product is a body and will therefore be delivered without battery and charger. Auction-ID: A1-40897-372
cutting diameter: 335 mmcapacity 90 degrees: flat: 500 x 335 mmsaw band length: 4400 x 34 x 1.1 mmspeed: 15.0 - 150 m/minwork height max.: 750 mmworkpiece weight: 250 kg/mcoolant tank capacity: 80.0 ltr.oil volume: 30.0 ltr.power capacity: 5.5 kWweight of the machine ca.: 1800 kgrange L-W-H: 2000 x 2200 x 1900 mm current list price: approx. 45.000 euros Special price available upon requestFeatures:- MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only- Automatic material feed - Continuously variable lowering speed 0â300 mm/min- Band saw speed controlled by frequency-regulated AC drive (15â150 m/min)- Automatic cutting pressure and feed monitoring- Hydraulic full-stroke material clamping- Automatic movement of the clamping blocks- Operatorâs manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
please note the roller conveyor / stop push up system is not included in the deal not tested for spare parts machine already ready for transport and to be viewed on viewing day for correct assessment Auction-ID: A1-48649-165
Supply and discharge track. Length of supply 7 mtr. Length of discharge track 3mtr With guidance Auction-ID: A1-48649-9
cutting diameter: 360 mmsaw band length: 4870 x 41 x 1,3 mmcutting width: 360 mmcutting speed: 11 - 110 m/min: 4,0 kWheight of the workpiece: 800 mmweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,3 x 1,9 x 2,2 mAutomatic hydraulic band saw with- SIMATIC OP17 NC control- Single material feed 600 mm- Max. programmable length 6000 mm- Hydraulic saw blade tensioning (36–40 bar)- Motorized chip conveyor- Emergency stop device- infeed roller conveyor 4mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200 x 88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,4 tdimensions: 1,2 x 0,9 x 1,5 mDisplay machine- Never used- 45° left/right miter- Head tilts up to 45° for bevel cuts (compound cuts)- Pneumatic dual quick-clamping system- Includes micro-spray system- Includes carbide saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double Miter Band Saw -Mitre cuts up to 60° left and 45° right -Vice with quick-release device -Belt tension control -Electr. Automatic cooling Cutting diameter 235 mm Saw blade dimensions 2645 x 27 x 0.9 mm Cutting width 280 x 190 mm Cutting speed 45/90 m/min Cutting capacity at 60° round 120 mm Cutting capacity at 60° square 120 mm Cutting capacity at 45° Round 190 mm Cutting capacity at 45° square 170 mm Connection voltage 400 volts Total power requirement 1.1 kW Machine weight approx. 290 kg Dimensions L x W x H 1.2 x 0.8 x 1.2 m Auction-ID: A7-49782-586
500 € 
