We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
kullanılmış
bore capacity in steel (diameter): 3 - 16 mm: max. 1500 mmweight: 300 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
kullanılmış
Description: High-quality drill press with a high speed range for the industrial use. Drilling capacity in steel 30 mm Projection 260 mm Drill stroke 135 mm Spindle mount MT 3 Table: 420 x 350mm Column diameter 135 mm Speed 125 - 3030 rpm Feeds 0.1 - 0.2 - 0.3 mm/rev Total power requirement 1.1 kWweight approx.: 380 kg, Approx. Onsite Dimension. (l x w x h): 900 x 550 x 2,200 mm
kullanılmış
Description: Equipped with - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection Turning diameter over bed 250 mm Turning diameter over support 130 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 20 mm Tailstock quill mount MK 2 Tailstock quill stroke 60 mm Metric threads 0.4 - 3.0 mm Thread - inch 10 - 44 TPI Thread - module 0.2 - 12.5 mm Connection voltage 230 V Total power requirement 1.0 kW Machine weight approx. 0.12 t Space requirement approx. 1.09 x 0.59 x 0.45 mweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,410 x 610 x 410 mm
kullanılmış
Description: Serial number: 8610016 Table dimensions: approx. 355 x 355 mm Power consumption: 1.5 kW With vice Jaw width: approx. 135 mmweight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 670 x 500 x 1,750 mm
kullanılmış
bore capacity in steel (diameter): Ø 25 mmthroat: 209 mmbore stroke: 95 mmturning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mmdistance spindle /table: 770 mmspindle turning speed range: 200-2440 U/mintotal power requirement: 0,75 kWweight of the machine ca.: 105 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
kullanılmış
Description: Manufacturer number: 0707 Speed range: 100 - 1300 rpm Drilling depth: 150 M/N Table dimensions: 350 x 320 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 750 x 550 x 1,950 mm
kullanılmış
Key data: 16
- Table diameter: 250 mm - Adjustable height table (clamping height): 0 - 630 mm - Drill chuck: RB 18-16 L (drill diameter up to 16 mm) - Electric connection: 220 V, 50 Hz, 510 W (motor specification) - Dimensions of the stand: 0.50 x 0.30 m - Transport dimensions (HxWxD): 1.80 x 1.20 x 0.70 m (Changes and errors to technical data and prices reserved!)
kullanılmış
bore capacity in steel (diameter): x mmbore capacity in steel (diameter): x mmthroat: x mmthroat: x mmbore stroke: x mmbore stroke: x mmPOLYHEDRAL DRILLING MACHINEDrilling range:-Square: Spanner opening 3-27mm-Hexagon: Spanner opening 3-32mmDrilling depth:-Square -14mm-Hexagon-13mmThroath150mmMisc accessoriesMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
kullanılmış
: ja vice: 1 quill stroke: ja : : 2.000 mmweight of the machine ca.: 790 kgstrong material: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
kullanılmış
Key data: 50 mm, 2000 1/min
Solid bench boring mill of the brand Stanko-Import, model 2H125 Stanko import Type: 2H125 Year of construction approx. 1975 massive rod drill with MK4 mount in good condition. Dimensions: L860 x W850 x H2400 Weight approx.: 1050 kg Motor 2,2Kw 380V Drilling depth gauge Automatic threading (RE-LI)up to M24 Drehz. 45 -2000 in 12 stages Feed 0.1-1.6 / Umdr.in 9 levels Projection 200mm Adjustment ranges: quill stroke 280mm Drill head 170mm Table 270mm, 400x400 The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.
kullanılmış
Manufacturer: Stankoimport Type: 2H135 Stock number: 0984 Year of construction: 1981 Spindle: CM4 Spindle diameter: 90 mm Spindle stroke: 250 mm Speed: 45 ... 1400 rpm Table size: 500 x 450 mm Table adjustment: 500 mm Dimensions (LxWxH): 1200 x 900 x 2500 mm Machine weight: 1500 kg
kullanılmış
Description: Morse taper 2 Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 400 x 600 x 1,800 mm
kullanılmış
Description: Capacity 13 Serial number: 1649 Voltage: 380V Speed range: 500-4500 rpm Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 60 kg, Approx. Onsite Dimension. (l x w x h): 240 x 600 x 800 mm
kullanılmış
: gebraucht : 1962 : 3962 : prompt, Zwischenverkauf v : 3950 €: 1 : 40 mm: MK 4 : 350 mm: 32 - 1400 U/min: 1100 mm: 700 mm: 2650 mm: 1055 kg: automatisch 0,11 - 1,73 ( mm/U: 650 (max) mm: 780 x 650 mm: 280 mmRadial drilling machinewith 12 Revs9 automatic feedscoolant pumpNouser manualDOES NOT COMPLY WITH THE GERMAN UVV &, AUSTRIAN AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
kullanılmış
Description: Column drilling machine with - Quick-action drill chuck - Drill depth adjustment - Emergency stop switch - Table top rotatable Drilling capacity in steel 32 mm Projection 257 mm Drilling stroke 115 mm Drilling spindle MK 4 Drill chuck 16 mm Drilling depth 120 mm Table surface area 475 x 425 mm Column diameter 92 mm Total power requirement 1.1 kW Machine weight approx. 0.135 t Space requirement approx. 0.75 x 0.85 x 1.72 mweight approx.: 135 kg, Approx. Onsite Dimension. (l x w x h): 750 x 850 x 1,750 mm
kullanılmış
Description: Drilling capacity in steel 40 mm Projection 360 mm Drill stroke 135 mm Recording MK 4 MK Table size 630 mm Feeds yes mm/rev Speed 120 - 1120 rpm Total power requirement 2.4 KW Machine weight approx. 0.9 t Dimensions L x W x H 1.2 x 0.8 x 2.75 mweight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,750 mm
kullanılmış
Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition
kullanılmış
Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
kullanılmış
: 1980 tool taper: MK : 205 - 1450 m/min.boring range:: 3 - 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
kullanılmış
Manufacturer: WMW Saalfeld Type: BK 50 AI Stock number: 0986 Drilling capacity in steel (diameter): 50 mm Projection: 355 mm Drilling stroke: 280 mm Spindle holder: MK5 Headstock adjustment: vertical 280 mm motorized Feed: 0.11-1.73/9step mm/rev Speed: 32-1400/12step rpm Table size: 770x640 mm Clamping surface: 630x500 mm Base plate: 490x530 mm Total power requirement: 8.1 kW Machine weight approx.: 1,7 t Machine dimensions approx. LxWxH: 1.25 x 0.8 x 2.75 m
kullanılmış
Description: pillar drilling machine Drilling capacity in steel 50 mm Projection 365 mm Drill stroke 200 mm Recording MK 4 MK Table size 660 mm Feeds yes mm/rev Speed 63 - 1000 rpm Total power requirement 2.3 KW Machine weight approx. 0.95 t Dimensions L x W x H 1.2 x 0.8 x 2.46 mweight approx.: 950 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,460 mm
kullanılmış
Description: Fabrication number: 10210 Operating voltage: 380 V Control voltage: 220 V Connection: 3.0 kW Rated current: 7 A Table dimensions: 450 x 360 mm With 3 grooves Attention: without the machine vice shown in the photos Spindle speed: 180 - 2000 rpmweight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 850 x 600 x 2,100 mm
kullanılmış
Woelfel B100/S used machine Spindle dia 125mm MK 6 Ram dia 165 mm with stroke 200 mm Spindle speed in 24 steps from 30 - 1200 rpm Vert. travel of headstock 1250 mm Bed clamping surface 870 x 700 mm Additional table 710 x 560mm height 500 mm Height between bed and spindle nose 1460 mm