Sütun tipi delme makineleri

: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Column drilling machine with: - variable spindle speed - Machine light Drilling capacity in steel 30 mm Projection 290 mm Drilling stroke 150 mm Recording MK 3 MK Table size 320 x 370 mm Speed 80 - 1400 rpm Total power requirement 2.0 KW Machine weight approx. 0.35 t Dimensions L x W x H 0.6 x 0.8 x 1.95 mweight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,950 mm

Description: Column drilling machine with: - Advance - variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 40 mm Projection 280 mm Drilling stroke 180 mm Recording MK 4 MK Table size 620 x 470 mm Feeds 0.1 - 0.2 - 0.3 mm/rev Speed 110 - 2900 rpm Total power requirement 1.9 KW Machine weight approx. 0.55 t Dimensions L x W x H 1.2 x 0.8 x 2.1 mweight approx.: 550 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,100 mm

Description: Serial number 18067 Includes 2nd clamping table approx. 400 x 380 mmturning speed range: 30 bis 3000 rpm, table surface area l x w : 500x370 mm, weight approx.: 600 kg, Approx. Onsite Dimension. (l x w x h): 900 x 750 x 1,900 mm

bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 165 mmspindle taper: MK4 turning speed range - stepless: 130-480/480-1750 U/mintable width: 742 mmtable depth: 594 mmtotal power requirement: 2,2 kWweight of the machine ca.: 700 tFeed with electromagnetic feed clutch0.1/0,2/0,3right- and left rotationCooling unit not available Table and Drilling Head height adjustableheight adjustment of upper drilling unit: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrleistung in Stahl (-Ø: 36 mmthroat: 350 mmbore stroke: 180 mmBohrleistung in Guß (-Ø: 45 mmspindle taper: MT: 4 spindle head adjustment: Ý 500 mmtable surface area: 600 x 700 mmfloor plate:: 460 distance work spindle /surface of the table: 80 - 750 mmspindle turning speed range: 0,09 - 0,28 U/minfeeds: 380 mm/WUvoltage: 50 Vpower capacity: 2,5 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 0,6 x 1,1 x 2,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja feed: 80 - 800 m/min: 1848 weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Automatic feed Spindle speeds infinitely adjustable footswitch Drilling capacity in steel 50 mm Projection 380 mm Drill stroke 240 mm Recording MK 4 MK Table size 660 mm Feeds yes mm/rev Speed 40 - 800 rpm Total power requirement 4.0 KW Machine weight approx. 0.85 t Dimensions L x W x H 1.2 x 0.8 x 2.45 mweight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,450 mm

Description: Speed range: 130 - 1750 rpm Table dimensions: approx. 500 x 370 mmtool taper: MK3, weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 900 x 630 x 1,900 mm

Description: Machine number: 627/3 Speed: 55 - 1450 rpm Table dimensions: 620 x 460 mm With vice Jaw width: 110 mm Drilling depth: up to 180 mmweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 700 x 1,900 mm

- mounting table: 300 x 400 mm - quill ram: 120 mm - speed range: 5800 rpm - gearbox stages: 2 - feed: 0,001 - 3,5 m/min - rapid: 3,5 m/min - taper fixture: MK 3 - thread cutting device with foot switch - coolant system - total power: 1,5 kW - weight of machine: 380 kg - space requirement (W x D x H): 0,66 x 0,44 x 1,95 m - condition: very good Details High-performance drilling machine, machine number 511 accessories documentation, coolant equipment

Box column drill Alzstar 40S 16 A 380 V Speed 160 - 2250 rpm Length 1 m Width 0.80 m Height 1.80 m Weight 270 kg Work lamp Color: White

Column drill Alzmetall

Description: Machine number: 10930 Table dimensions: 300 x 250 mm With 2 groovesweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,900 mm

weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 2,000 mm

Bluthardt, VRB 6/20 Drill with coordinate table, with digital display DRO , Year of construction: 1980, very good condition, to be visited under electricity Adapter SK40, quick-change system, incl. mounts MK2, MK3, MK4 , Spindle : 45 - 900 rpm , 3,4KW, clockwise - counterclockwise, Stroke: 200mm, upper part adjustment electr. 500mm Projection : 500, Coordinate table: clamping area 600x400m, X-660, Y-450mm

Description: SPECIFICATIONS Character: Bronzework Type: 1003 Finger setter: Yes Sheet thickness: 3 mm Bending length: 1,000 mm 9 loose fingers present: Yesweight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,700 mm

Description: Table height-adjustable and swivelling, motor 0.55 kW, 920 rpm, belt driveweight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,800 mm

Description: .weight approx.: 180 kg, Approx. Onsite Dimension. (l x w x h): 700 x 500 x 2,000 mm

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Description: Drilling capacity 13 mm Spindle taper B16 or CM2 5 Speeds 500-4500 rpm Collection on: 29/04/2024 or 30/04/2024 afternoon or 06/05/2024  ,  ,Collection times by arrangement  , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in  ,in the item descriptionweight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 450 x 630 x 1,450 mm

bore capacity in steel (diameter): 6-40 mmtable-size: 560 x 450 mm mmthroat: 330 mmturning speed range - stepless: 60-1800 U/minbore stroke: 1780 mmtotal power requirement: 3 kWweight: 1,1 tdimensions of the machine ca.: 1,2x0,8x2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Control type: conventional, technical details: speed range - continuously variable 60 - 1800 rpm, table size 450 x 560 mm, coolant yes, drilling performance in steel (diameter) 6-40 mm Throat 330 mm, drilling stroke 1780 mm, total power 3 kW, weight 1.1 t, number of grooves 3 Cone holder MK 4, additional information: gear drill with thread cutting deviceweight approx.: 1,100 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,500 mm

: gebraucht : 2021 : 3974 : prompt, Zwischenverkauf v : Spanien : 5100 €: 1 : 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: 1,8/2,6 kW: M24 : 600 mm: 640 mm: 2020 mm: 260 kg: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 600 x 380 mm: 120 mmdemo machineERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machinemanual feedleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMAN(sample photo)OPTIONS:lighting equipment€ 231,--coolant equipment and machine base with T-slots€ 825,--reverse for tapping€ 737,--DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Column drill Table dimensions: 400 x 320 mm Spindle vertical travel: 200 mm 9 working speeds: 77-1280 Rpm Rotary table Vice includedtable surface area l x w : 400x320 mm, weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 650 x 1,000 x 2,250 mm

Description: Column drill Serial number 944/6042 Table dimensions: 320 x 320 mm Spindle vertical travel: 150 mm 8 working speeds: 75-2100 Rpm Motor power 1.1 kW  ,table surface area l x w : 330x320 mm, weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 700 x 800 x 2,300 mm

Description: Column drilling machine with belt drive, control range 100 - 1000weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,500 mm

table surface area l x w : 260x200 mm, weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 850 x 450 x 1,600 mm

Year: ca. 1988 Wario: . tool taper: MK 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

Duration / ALB ear power 25/30 mm Thread cutting capacity Max M20 Spindle MK III Drilling depth 125 mm Throat depth 260 mm Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 0.90/1.45 kW Spindle speed with idle, stepless 125-4000 1 / min in 2 levels I: 125-2000 1 / min II: 250-4000 1 / min The levels change via belt apportionment Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 50 x 90 x 195 mm

S. No.: 238828

Description: Machine number: 56 Spindle speeds: 310 - 2920 rpm Table dimensions: 500 x 400 mm With 4 grooves Drilling depth: up to 120 mm Incl. lot different drill bitsweight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,750 mm

taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring stroke: 120 mm, boring diameter: 24 mm, turning speed range: 193 - 2280 rpm, table surface area l x w : 350x350 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm

Description: Column drilling machine with: - Advance - variable spindle speed - Coolant pump - Machine light Drilling capacity in steel 32 mm Projection 320 mm Drilling stroke 170 mm Recording MK 4 MK Table size 570 x 480 mm Feeds 0.1 - 0.16 - 0.25 mm/rev Speed 60 - 1600 rpm Total power requirement 1.6 KW Machine weight approx. 0.65 t Dimensions L x W x H 1.2 x 0.8 x 2.15 mweight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,150 mm

Description: Column drilling machine Drilling capacity 32mm Drilling stroke 140mm Projection 250mm Recording MK3 Feed via handwheel Table 360 x 360mm Motor 1.5KW Speed 60 - 1400rpmweight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm

Description: Gear drilling machine Thread cutting device Left / right run Tilting work table. Lighting. 2 electr. Speed levels. Depth stop. Gears run in oil. Package dimensions: 2100 x 400 x 710mm Weight 260kg Drilling capacity in steel 30 mm 250 mm projection Drilling stroke 130 mm Spindle taper MK 3 MK Table: 380 x 380 mm Column diameter 98 mm Speed 75 - 3200 rpm Total power requirement 1.1 kW Machine weight approx. 220 kg. Dimensions L-W-H 0.5 x 0.6 x 2.05 mmweight approx.: 220 kg, Approx. Onsite Dimension. (l x w x h): 500 x 600 x 2,050 mm

Description: Pillar drilling machine with: automatic feed Tapping function. Digital depth display 2 stage engine spindle protection Swivel table LED lighting Coolant system Drilling capacity in steel 40 mm Throat 350 mm Drilling stroke 180 mm Spindle mount MK 4 MK Table: 560 x 560 mm Column diameter 140 mm Speed 50 - 1450 rpm Feed rates 0.1 - 0.2 mm / rev Total power requirement 1.5 kW Machine weight approx. 580 kgweight approx.: 580 kg, Approx. Onsite Dimension. (l x w x h): 700 x 1,100 x 2,300 mm

Description: Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 120 mm Spindle taper MK 4 MK Table: 290 x 270 mm Column diameter 92 mm Speed 150 - 2450 rpm Total power requirement 1.1 kW Machine weight approx. 95 kg Dimensions L-W-H 0.66 x 0.8 x 1.7 mweight approx.: 95 kg, Approx. Onsite Dimension. (l x w x h): 660 x 800 x 1,700 mm

weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 2,200 mm

Description: Column drilling machine with: automatic feed Left/right rotation 2 stage motor Drilling capacity in steel 28 mm Projection 320 mm Drilling stroke 150 mm Table 500 x 320 mm Spindle holder MK 3weight approx.: 280 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,900 mm

boring stroke: 120 mm, boring diameter: 32 mm, table surface area l x w : 380x380 mm, weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,800 mm

Description: Table dimensions: approx. 315 x 245 mm With swivel table 2 speed settings: 750/1500 rpm With left and right rotary switch Stroke: 0 - 130 mmweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,820 mm

Description: Universal tool milling machine - Digital display - Central lubrication - Coolant system - Vise - Operation manual x-travel 860 mm y-travel 250 mm z-travel 450 mm Speed range - vertical 50 - 1700 rpm Head swiveling: Huron head Spindle holder ISO SK40 Table surface 1100 x 250 mm Total power requirement 4.2 kW Machine weight approx. 1.4 t Space requirement approx. 1.7 x 1.4 x 1.8 mweight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,400 x 1,800 mm

bore capacity in steel (diameter): 30 mmtool taper: MK 4 bore stroke: 225 mmthroat: 315 mmtable-size: 650 x 560 mmfeeds: o,1 bis 1,5 mm/Uspindle turning speed range: 40 - 1800 U/mintotal power requirement: 5,15 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: 1,2 x 0,8 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number: 181 954 Drilling depth: up to 150 mm Table dimensions: 800 x 240 mmweight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,100 mm