Üretici:
(kategori: 107)
working area: 3000 x 1500 mm: 5000 W: 25 mmsheet thickness for stainless steel: 20 mmSheet thickness aluminum: 12 mmmachine weight ab.: 12.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2600 mmstroke of upper beam: 265 mmthroat: 450 mmdayligth: 530 mmworking feed: 10,0 mm/secajustment speed: 160 mm/secreturn speed: 100 mm/secControl: CYBELEC ModEva 10S work height max.: 900 mmtable width: 104 mmback stop - adjustable: 800 mmoil volume: 250 ltotal power requirement: 18,5 kWweight: 10900 kgrange L-W-H: 4250 x 1700 x 2850 mm from a maintenance workshop - good condition () New price ~ 84.000 eurosFurnishing:- with DELEM numerical CNC control model DA 66W 2D graphical programming automatic bending sequence calculation and collision detection high-quality color LCD screen (TFT)- pivoting control, front right- controlled axes : Y1 + Y2 + X + R + CNC crowning (WILA)- CNC electric backgauge (X axis) Travel speed 500 mm/sec.- CNC electric height adjustment (R axis) Travel speed 350 mm/sec. Travel range 250 mm- 4x man ...
: neu : 2026 : 070155 : prompt, Zwischenverkauf v : Türkei : 6900 €: 133.17 €: 1 : 500 kg: 1200 mm: 400 mm: 550 mm: 300 mm: 80 mm: 1450 mm: 1200 mm: 1640 mm: 260 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPNEUMATIC DOWN HOLDER SUPPORT ARMThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 €: 653.22 €: 100 mm: 315 mm: 3 : 7.5 kW: 7 m/min: 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm: 2000 mm: 1700 mm: 4000 kg3 hydr. driven rollsstrong welded steel constructionlower rolls hydr. adjustabledigital read-out for lower rollspositions on seperate control panellateral rolls adjustable in 3 axeshorizontal and vertical operationfor- and backward drivemachine and equipment according to theCE regulationsWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 50900 €: 962.01 €: 2540 mm: 6.5 mm: Hydraulisch : 135 °: 3900 mm: 1750 mm: 2050 mm: 6200 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 47600 €: 909.16 €: 3100 mm: 2.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4000 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 51100 €: 965.79 €: 3100 mm: 3.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4520 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 52900 €: 999.81 €: 3100 mm: 4.5 mm: Hydraulisch : 135 °: 4500 mm: 1750 mm: 1950 mm: 5500 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width:300 mmcoil weight:0,5 tcoil internal diameter:270 - 360 mmcoil external diameter:1000 mmweight:0,3 tdimensions (WxDxH):1,5 x 1,2 x 1,4 m
: neu : ca. 6 Monate ab Auftragse : Taiwan : 56500 €: 1067.85 €: 3100 mm: 6.5 mm: Hydraulisch : 135 °: 4500 mm: 1750 mm: 2050 mm: 6800 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 57500 €: 1086.75 €: 4010 mm: 2 mm: Hydraulisch : 135 °: 5600 mm: 1750 mm: 2050 mm: 4600 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width:310 mmno. of straightening rolls:5 straightening roll diameter:25 mmdimensions (WxDxH):0,4 x 0,6 x 1,15 m
material width:210 mmno. of straightening rolls:6 straightening roll diameter:40 mmdimensions (WxDxH):0,45 x 0,6 x 1,1 m
material width:500 mmcoil weight:2 x 2,0 tmaterial thickness:1,0 - 6,0 mmcoil internal diameter:350 - 420 mmcoil external diameter:1600 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 speed:0 - 40 m/minmaterial thickness at 500 mm material width:3,5 mmpower requirement:17,5 kWDimensions (WxDxH):2,3 x 4,2 x 2,4 mstraightening machine:RM 5050.4/9 double decoiler:AH 2000/2/M snubber roll:pneumatic interchangeable jaws:130 mm expansion of the inner diameter
: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 €: 284.16 €: 1 : 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 80 mm: 1600 mm: 1550 mm: 2000 mm: 580 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPneumatic downholderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 €: 947.36 €: 130 to: 600 mm: 5 : 2 : 50x18 mm: 80 mm: 600x18 (max. 600x20 mit D mm: 120x120x11 (max. 150x150x mm: 45/40 mm: 130x12 mm: 250x12 mm: 15 kWhydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V50 and V90flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 €: 530.98 €: 3030 mm: 4 mm: 4 mm: 2 mm: 180 mm: 4 kW: 4600 mm: 1120 mm: 1020 mm: 4250 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width:300 mmcoil weight:0,5 tcoil internal diameter:420 - 520 mmcoil external diameter:1400 mmweight:0,6 tdimensions (WxDxH):0,8 x 1,2 x 1,7 mexpansion:pneumatic
sheet width:400 mmplate length:500 mmplate thickness:4 mmtotal power requirement:0,5 kWPunching and Nibling machine with 6 x 3 mm nibling and 4 mm for cuting
material width:250 mmmaterial thickness:0,25 - 3,0 mmno. of straightening rolls:11 straightening roll diameter:30 mmspeed:6 - 60 m/minpower requirement:15,0 kWweight:1,1 tdimensions (WxDxH):1,1 x 1,7 x 1,5 mstriaghtening pressure automatic:hydraulic coil loof control:ultrasonic
: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 €: 831.81 €: 1550 mm: 12 mm: 12 mm: 10 mm: 10 mm: 8 mm: 220 mm: 200 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 3900 mm: 1150 mm: 1250 mm: 3600 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...
material width coil line:600 mmcoil weight:2 x 3,5 tcoil internal diameter:460 - 530 mmcoil external diameter:1500 mmmaterial thickness coil line:0,5 - 3,0 mmno. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mmfeed length:0 - 500 mmpower requirement:10,0 kWweight:10,0 tdimensions of the coil line:8,8 x 4,0 x 2,55 mstraightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed
material width:800 mmcoil weight:12,0 tcoil internal diameter:470 - 520 mmcoil external diameter:1500 mmmaterial thickness:0,4 - 2,5 mmno. of straightening rolls:8 straightening roll diameter:53 mmnumber of draw-in rolls:2 inlet roll diameter:160 mmspeed:35 m/minmaterial thickness at 150 mm material width:2,5 mmmaterial thickness at 650 mm material width:1,5 mmmaterial thickness at 800 mm material width:1,0 mmstraightening machine:RM 8-53/160-800 decoiler:HE 200-1000
: neu : ca. 6 Monate ab Auftragse : Taiwan : 39000 €: 744.9 €: 2035 mm: 2.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2023 : 5542 : prompt, Zwischenverkauf v : Italien : 11600 €: 1 : 1300 mm: 150 mm: 150 mm: 250x350 mm: 945 mm: 0.75 kW: 1400 mm: 1000 mm: 1450 mm: 300 kgDemo machine / mint conditionNet price (price for new machine € 13.600,00)Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum.The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm.The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° an ...
material width:250 mmcoil weight:2,5 tcoil internal diameter:430 - 520 mmcoil external diameter:1650 mmmaterial thickness:0,5-6 mmno. of straightening rolls:7 straightening roll diameter:60 mmnumber of draw-in rolls:2 weight straightener:1,2 tweight decoiler:1,4 tdimensions straightener (WxDxH):1,2 x 1,2 x 2,0 mdimensions decoiler (WxDxH):1,8 x 1,8 x 2,3 mexpansion:hydraulic
material width:203 mmmaterial thickness:0,1 - 1,9 mmfeed length:101 mmweight:0,1 tdimensions (WxDxH):0,5 x 0,8 x 0,5 m
: neu : ca. 12 Wochen ab Auftrags : Türkei : 160788 €: 2583.63 €: 136700 €: 3 kW: - : 12 mm: 6 mm: 6 mm: 3 mm: 6 mm: 26,5 kW: 250 mm: 16 mm: 160 x 160 mm: 200 x 150 mm: 6000 mm: 58 kg/m: +/- 0,2 mm: +/- 0,05 mm: rund, quadratisch, rechte : 40 m/min: 94 m/min: 30 m/min: 510 °/sThe machine consists of the following components:- Encapsulated cutting room with protective glazing- CNC graphic control with touchscreen- Laser source Brilase 3 kW Premium incl. chiller- Cutting head with automatic focus adjustment- manual loading-manual unloading table 3 m- Positioning laser- Central lubrication- slug car- CAD/CAM software with autonesting- Work area lightingPRICE FCA TÜRKIYEOPTIONS:Suction unit with filtersSemi-automatic loading systemManual unloading table 6 m with conveyerDurma cloud licenseLasersources with 4 or 6 kW on requestThe data for this ad was created with ModulMWS - the so ...
material width:450 mmmaterial thickness:1,0 - 14,0 mmcoil weight:10,0 tcoil internal diameter:470 - 520 mmcoil external diameter:1100 - 2000 mmno. of straightening rolls:12 straightening roll diameter:2x70 / 2x96 / 8x127 mmnumber of draw-in rolls:2 inlet roll diameter:160 mmmin. material width:100 mmspeed:15 m/minpower requirement:75,0 kWweight of decoiler:6,4 tweight of straightening machine:12,8 tdimensions decoiler (WxDxH):3,1 x 1,4 x 3,7 mmdimensions straightener (WxDxH):2,5 x 3,4 x 2,7 mmstraightening machine:RMS-Vario-12-70/96/127-0450 infinitely variable drive:insert drive upper straightening part:hydraulic liftable loop bridge:hydraulic driven threading wedge:hydraulic decoiler:HES 12-650 infinitely variable drive:insert drive lag brake:pneumatic snubber roll:hydraulic; motoric driven expansion:hydraulic coil lifting device:hydraulic cropping shears:HS-150-0450
: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 27 mm: 27 mm: 18 mm: 23 mm: 20 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...
