presler kullanılmış satılık (1,677)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7300 €: 140.89 €: 60 to: horizontal verschiebbar : 250 mm: 1040 mm: 180x120 mm: 4 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 800 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 €: 148.61 €: 80 to: horizontal verschiebbar : 250 mm: 1040 mm: 865 mm: 200x120 mm: 5 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 835 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 220 mmstroke: 8 - 80 mm mmtotal power requirement: 2,2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 0,9 x 1,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 120000 €: 2268 €: 300 to: 500 mm: 1000x500 mm: 1200x800 mm: 600 mm: 400 mm: 22 mm/s: 2 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3100 mm: 11200 kg4-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch € on R ...

: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 €: 1 : 30 to: 1250 mm: X und Y Achse : 150 mm: 1010 mm: 255 mm: 265 mm: hydraulisch : 210 mm/s: 10 mm/s: 3 kW: 1760 mm: 1375 mm: 2135 mm: 1700 kgDEMO MACHINE, MINT CONDITIONNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMANincl. laser protection device Fiessler(sample photo) BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-F ...

: neu : 2025 : 080112 : prompt, Zwischenverkauf v : Türkei : 86376 €: 1438.29 €: 1 : 76100 €: 175 to: 3050 mm: Y1 / Y2 / X und R-Achse : 265 mm: 2600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 100 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 18.5 kW: 4250 mm: 1700 mm: 2850 mm: 10900 kg4axes (Y1, Y2,X and R)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linea ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94120 €: 1778.87 €: 175 to: 4050 mm: Y1 / Y2 / X Achse : 265 mm: 3600 mm: 450 mm: 530 mm: hydraulisch : 160 mm/s: 10 mm/s: 140 mm/s: 500 mm/s: 350 mm/s: 250 mm: 900 mm: 104 mm: 250 l: 18.5 kW: 5250 mm: 1700 mm: 2850 mm: 12780 kg3 axes (Y1, Y2,X)CNC control DT-15- 2D grafic display 15",- intuitive touch-screen control (simple drawing of the bending outline with your finger)- user friendly programming in dialogue form- automatic calculation of the bending sequence- automatic calculation of the blank sheet size- graphic product and tool memory- correction possibility- USB interfaces for backup and programm transportation- PC software, generating programms on the PC and transfer to the machine by USBservo motorized back gauge on linear guides and ball screwsback gauge finger blocks on double linear guidesCNC crowning tableupper tool 1010  ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to: 500 mm: 6.000 x 2.550 mm: 700 mm: 18 mm/s: 3 mm/s: 5000 mm: 6000 mm: 3000 mm: 43000 kg: horizontal verschiebbar : 2550 mm: 2200 mm: 4600 mmhorizontal movable cylinderhydraulicaly movable standcontrol by levers as well as control panelaccording to CE regulations user manual in GERMAN and ENGLISHOPTIONS:Work table, welded to the base frame, with holes on the surfaceControl panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU)Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU)Siemens control with touchscreenLifting cylinders in the table (6, 8 or 10 pcs.)No-rotation shaft for the piston2 speeds for stand movement and cylinderOil cooler and decompression valveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 101500 €: 1918.35 €: 100 to: 5 mm: 1000 mm: 630 mm: 180 mm: 15 - 140 mm: 45 - 70 1/min: 8 : 90 mm: 320 mm: 570 mm: 11 kW: 1320 mm: 2200 mm: 3080 mm: 10000 kg8-fold ram guidefixed tablesemi-automatic stroke adjustmentmotorized ram adjustmentVariable speed motorhydraulic overload protectiondynamic brakingplatenautomatic circulation lubricationsafety light guard Keyenceuser manual in GERMAN or ENGLISHAutomation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen.Standard monitoring:- Press speed view and adjustment- programmable piece counter and maintenance piece counter- die space adjustment with brake motor- semi automatic or automatic stroke adjustment- die safety control- alarms view- overload protectorThe data for this ad was created with ModulMWS - the software solution of  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 55200 €: 1043.28 €: 200 to: 500 mm: 1000x600 mm: 640 mm: 21 mm/s: 2 mm/s: 5.5 kW: 1800 mm: 1300 mm: 2500 mm: 6400 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 63500 €: 1200.15 €: 70 to: 500 mm: 900x700 mm: 600 mm: 25 mm/s: 6 mm/s: 4 kW: 1140 mm: 940 mm: 2350 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 62500 €: 1181.25 €: 150 to: 500 mm: 800x400 mm: 900x600 mm: 500 mm: 300 mm: 20 mm/s: 3 mm/s: 4 kW: 2200 mm: 1500 mm: 3000 mm: 5500 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € o ...

: neu : ca. 4 Monate ab Auftragse : Italien : 82000 €: 1549.8 €: 200 to: 500 mm: 870x500 mm: 1000x600 mm: 500 mm: 300 mm: 21 mm/s: 3 mm/s: 7.5 kW: 2300 mm: 1500 mm: 3000 mm: 8200 kg2-fold round guidancetable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual OPTIONS: Light barrier € on Request Siemens control for programming of stroke and press time € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming:• Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil cooler with decompreission valve € on Request Pressure switch  ...

: neu : ca. 4 Monate ab Auftragse : Italien : 43200 €: 825.12 €: 150 to: 500 mm: 800x600 mm: 630 mm: 22 mm/s: 3 mm/s: 4 kW: 1800 mm: 1200 mm: 2400 mm: 4500 kg2 speedsadjustable max. pressuremanometeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 23700 €: 455.04 €: 40 to: 800 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 1750 mm: 950 mm: 1900 mm: 1640 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 €: 786.92 €: 40 to: 1550 mm: X und Y Achse : 160 mm: 1260 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 5.5 kW: 2000 mm: 1600 mm: 2235 mm: 3450 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersintermediate pieces for the upper tool clampingdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):laser safety device FiesslerNC controlled R axismanual crowning tablemotorized crowning tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2000 : 070165A : prompt, Zwischenverkauf v : Italien : 27900 €: 1 : 40 to: 2.6 mm: 650 mm: 380 mm: 120 mm: 8 - 78 mm: 145 1/min: 6 : 60 mm: 40 mm: 195 mm: 297 mm: 800 mm: 3 kW: 1450 mm: 1150 mm: 2150 mm: 2200 kgTwo-hand control panel and foot pedalWork area enclosure with safety switchAdditional bolster plateCentral lubrication systemStroke counterOperating manual with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with  ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7700 €: 148.61 €: 100 to: fix : 900 mm: 1050 mm: 1900 mm: 850 mm: 2250 (PSS: 2400) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 100 TL: 1 speed 4 mm/s, single-hand control with lever € 7.700,00 PSS 100 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.400,00 PSS100 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.000,00 PSS 100: same as PSS 100 NC but with stroke 500 mm € 10.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 12500 €: 240 €: 150 to: fix : 150 mm: 780 mm: 1000 mm: 1900 mm: 1200 mm: 2450 (PSS: 2600) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 €: 1956.15 €: 150 to: 500 mm: 1250x1000 mm: 600 mm: 23 mm/s: 4 mm/s: 5.5 kW: 1520 mm: 1270 mm: 2500 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech o ...

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 3800 €: 20 to: fix : 825 mm: 520 mm: 1150 mm: 500 mm: 1800 (PSS: 1950) mmThe table can be lifted manuallyHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 20 TL: 1 speed 4 mm/s, single-hand control with lever € 3.800,00 PSS 20 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 4.500,00 PSS 20 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 5.100,00 PSS 20: same as PSS 20 NC but with stroke 500 mm € 5.200,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 74800 €: 1413.72 €: 100 to: 500 mm: 1000x800 mm: 600 mm: 26 mm/s: 5 mm/s: 4 kW: 1260 mm: 1060 mm: 2400 mm4-pillar guideram guide roundtable and ram with T-slots2 hand operationSiemens PLCmanometerusers manual Light barrier € on RequestSiemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota• Break time in the bottom• time of Decompression• setting pressure of work• Pieces counter• prestop in upstroke and downstroke• setting for movement in manual and in automatic• management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on RequestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 €: 1228.5 €: 35 to: 500 mm: 800x500 mm: 600 mm: 125 mm/s: 9 mm/s: 68 mm/s: 4 kW: 1100 mm: 1100 mm: 2300 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 €: 1474.2 €: 85 to: 500 mm: 900x600 mm: 600 mm: 105 mm/s: 7 mm/s: 58 mm/s: 7.5 kW: 2250 mm: 1150 mm: 2400 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 €: 1965.6 €: 125 to: 500 mm: 1200x700 mm: 600 mm: 115 mm/s: 7 mm/s: 70 mm/s: 15 kW: 2550 mm: 1500 mm: 2600 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 €: 1347.57 €: 60 to: 500 mm: 800x500 mm: 600 mm: 120 mm/s: 8 mm/s: 58 mm/s: 5.5 kW: 1100 mm: 1100 mm: 2350 mm4-pillar guidetable and ram with T-slots2 hand operationstroke adjustmentpressure adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15500 €: 297.6 €: 150 to: horizontal verschiebbar : 300 mm: 750 mm: 1570 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2560 mm: 1000 mm: 2480 mm: 2350 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:100 tthroat:315 mmstroke:30 - 160 mmno. of strokes:40 /mindistance table/ram, max. stroke up, adjustment up:460 mmtable surface area:910 x 680 mmHole in the table:400 mmtable height over floor:800 mmpassage to the back:400 mmram surface:630 x 400 mmram adjustment:80 mmpower requirement:7,5 kWweight:7,5 tdimensions (WxDxH):1,7 x 2,0 x 3,0 mGerman Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic