Üretici:
(kategori: 106)
strok: 400mm, boğaz derinliği: 300mm, ram tabla mesafesi: 965mm, ram hızı ileri/geri: 100mm/s, çalışma hızı: 10mm/s, tabla genişliği: 1700mm, çalışma uzunluğu: 2600mm, çalışma yüksekliği: 1080mm, kolon mesafesi: 2300mm. Makine boyutları X/Y/Z: yaklaşık 3750mm/2600mm/3600mm, ağırlık: yaklaşık 17500kg. Yerinde inceleme mümkündür.
Baskı kuvveti: 2000kN, çalışma genişliği: 3100mm, kolon geçişi: 3240mm, strok: 400mm, boğaz derinliği: 250mm, maks. montaj yüksekliği: 965mm, NC eksenleri: 11, hidrolik hacim: 550l, makine boyutları X/Y: yaklaşık 4400mm/3400mm, ağırlık: yaklaşık 16600kg, kontrol: Cyb-Tech Infinitron. Belgeler mevcut. Yerinde inceleme mümkündür.
Eski bir Künstner & Hampel eksantrik pres mevcuttur. Basınç kapasitesi: 25 ton, güç gereksinimi: 2,5 HP. Yerinde inceleme mümkündür.
Delme kuvveti: 40t, çalışma aralığı: 1500mm / 900mm, maks.sac kalınlığı: 4mm, boyutlar X / Y / Z: yaklaşık 3700mm / 1700mm / 1900mm, ağırlık: yaklaşık 2500kg. Çeşitli pullar dahil.
Baskı kuvveti: 10MP, strok hızı: 120 / dak, ram strok ayarı: 5mm-55mm, çubuk uzunluğu: 40mm, ağırlık: yaklaşık 1200kg.
Montaj yüksekliği: 408mm, çalışma basıncı: 315bar, maks. baskı kuvveti üst piston/alt piston: 630kN/100kN, üst piston geri çekme kuvveti: 71kN, strok üst piston/alt piston: 160mm/80mm, aşırı hareket: 26mm, aşırı hareket süresi: 106ms, güvenlik mesafesi: 169mm, hidrolik yağ kapasitesi: 250l, ağırlık: yaklaşık 3700kg, çalışma saatleri: 9283h. Belgeler mevcut. Yerinde inceleme mümkündür.
A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.
Basınç: 10 tSütunlar arası mesafe: 260 mmGün ışığı: 210 mmMasa yüzey alanı: 275 x 260 mm
Machining center and extruded profile plant for car sill production, consisting of:, Processing machines:, - Anger machine SP2-X2000 (machine number AA100264-11), - Anger machine SP2-X2000 (machine number AA100264-12), - 2x coolant treatment, Assembly of components (robot cell for sills):, - Robot 1 KUKA KR120 R3200 PA, - Gripper for robot 1, - Labeling station, - Robot 2 KUKA KR120 R3500, - Gripper for robot 2, - Robot/machining center interface, - Cleaning unit for components, - Assembly machine 2 lanes, - Robots 3 and 4 for handling, - Drawer system with parts inserts, - Screwing station, - Adhesive application station, - Platform, - Robot 5, - Gripper for robot 5, - Pallet parking space, - Safety enclosure, - Electrical control and integration, Further information on request.
pressure: 40 tthroat: 225 mmstroke: mmtotal power requirement: 4,7 kWweight of the machine ca.: 3,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tthroat: 250 mmstroke: 1280 mmtotal power requirement: 6,5 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
basınç: 200 tnominal güç: 2000 kNstrok uzunluğu maks.: 1700 mmÇalışma beslemesi: 50 mm/snalet ağırlığı maks.: 50000 kggerilim: 400 Vtabla boyutu: 4.800 x 2.400 mmtoplam güç gereksinimi: 99 kWmakinenin ağırlığı ca.: 113 tMakinenin boyutları ca.: mpassage genişliği: mmstrok: mmBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
basınç: 100 pah uzunluğu: 2050 mmtoplam güç gereksinimi: 11 kWmakinenin ağırlığı ca.: 5,9 tmakinenin boyutları ca.: m- ram ayarı: 150 mm- ram mesafesi: 400 mm- strok: 150 mmBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
pressure: 1250 tchamfer lenght: 15000 mmdistance between columns: 10160 mmControl: CNC 10 Grafik total power requirement: kWweight of the machine ca.: 230 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tpiston stroke: 400 mmdiameter of piston: 300 / 185 mmthroat: 225 mmtable-size: 1150 x 350 mmspeed of pressing: 166 mm/secpre-running speed: 75 mm/secreturn speed: 208 mm/secweight: 26 ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- speed of pressing: 16 ...6 mm / sec- advance: 75 mm / sec- rapid return: 208 mm / sec- distance between plunger with ram and locators: 320 mm- distance between locators of piston and table: 50 ... 888 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...
Basınç: 160 Tchamfer Uzunluk: 3050 mmSütunlar arası mesafe: 2550 mmTabla genişliği: 220 mmKol: 280 mmGündüzlük: 440 mmÇalışma stroku: Max. 250 mmToplam güç gereksinimi: 22 kWMakinenin ağırlığı yaklaşık: 13 t- Hubgeschw. / strok hızı: abwärts: aşağı, 90 mm/s- Aşağı bastırın 11 mm/s- Aufw. / yukarı: 90 mm/s- Spez/specif.: 2-El/Fuss-Bedienung / 2 –el ayak pedalıBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
nominal power: 63 tstroke rate in continuous stroke: 90 minforce: 2200 NmTorque: 12500 NmLabour performance: 5,5 kWsheet thickness - max.: 6,3 / 3,2 mmcutting surface: 1600 mm²distance between columns: 320 mmthroat: 315 mmmin. ram stroke: 8 mmmax. ram stroke: 120 mmram adjustment: 70 mmram surface: 400 x 500 mmtool hole in ram: 40 mmtool shank hole (depth x diameter): 92 mmT-slots: 2 Stktotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
basınç: 250 tthroat: 360 mmTabla boyutları: 1250 x 630 mmtabla çapı: 250 mmşahmerdan boyutu: 850 x 450 mmdayligth: 800 mmpiston stroku: bis 500 mmpiston çapı: 400/360 mmram strok hızı: abwärts 200 mm/secram strok hızı: aufwärts 110 mm/sntoplam güç gereksinimi: 20,5 kWmakinenin ağırlığı ca.: 8 tmakinenin boyutları ca.: mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
pressure: 100 tstroke: 380 mmtable surface area: 1740 x 996 mmpressure: 258 barajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/secdayligth: 700 mmtable height: 720 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1685 kg- Manually movable portal- Movable cylinder manually (left - right)- Cylinder extension up to the table- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Joystick to move the piston up / down- Hand pump for precision workThese straightening presses are equipped with a movable cylinder (on the side) and aMovable frame (longitudinal-running) equipped to allow easy access to allallow points of the surface. The design of this portal pressmakes it possible to put heavy material on the table with a crane and thatSlide the portal over the material at the beginning of the pressing process.The quality of these hydraulic s ...
pressure: 63 tpassage width: 1350 mmstroke: 300 mmtotal power requirement: 16 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 2,0 x 1,8 x 3,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
basınç: 500 tGeçiş genişliği: 750 mmstrok: 120 mmtoplam güç gereksinimi: 57 kWmakinenin ağırlığı ca.: 16 tMakinenin boyutları ca.: m
pressure: 10 tdistance between columns: 500 mmstroke: 200 mmtotal power requirement: 10 kWweight of the machine ca.: 4.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
basınç: 125 tsütunlar arası mesafe: 1050 mmstrok: 250 mmtoplam güç gereksinimi: 40 kWmakinenin ağırlığı ca.: 8,5 tMakinenin boyutları ca.: m
pressure: 34,0 kNstroke: 40 mmthroat: 130 mmWorking height from to: 80 - 240 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 80 Kgdimensions: 375 x 200 mmToggle pneumatic pressesincl. working height fine adjustment via bevel gear with lateral crankcomfortable and easily adjustable.Toggle lever pneumatic presses are to be used when the maximumpressure is required shortly before the end of the stroke, e.g. when assembling, punching,embossing, caulking, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 tthroat: 360 mmstroke: 560 mmtotal power requirement: 33 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: 2000x2400x3650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Basınç: 10 tstrok: 200 mmMasa boyutu: 450 x 450 mmÇalışma hızı:: 10 mm / sn.maksimum çalışma yüksekliği: 940 mmalet yüksekliği maks.: 150 mmtoplam güç gereksinimi: 1,1 kW: 150 x 6 mmağırlık: 0,4 tBoyutlar: 1,15 x 0,5 x 0,9 mmYatay bükme makinesi:- NC kontrolü- Çift ayak pedalı- Standart alet seti
pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Basınç: 40 tStrok sayısı: 500 Hub/dakSac genişliği: mmtoplam güç gereksinimi: 5,5 kWMakinenin ağırlığı ca.: tMakinenin boyutları ca.: m
