Üretici:
(kategori: 106)
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock openings in uprights: yes number of suspensions: 2 feedstock transport direction: left to right PRESS FORCES total force (nominal): 315 to nominal work capacity: 38 kNmPRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 1200 mm thickness of bolster plate: 200 mmSLIDE slide force: 315 to table surface (left-right): 1995 mm table surface (front-back): 1100 mm stroke: 160 mm stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS) slide adjustment: 140 mm stroke rate (min.): 20 /min stroke rate (max.): 80 /min main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS& ...
pressure: 100 tthroat: 355 mmstroke: mmtotal power requirement: 11,5 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two press brakes LVD are available. 1) Press brake LVD PPBL-H 100/40, year of manufacture: 1993, pressing force: 1000kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 130mm, table-to-ram distance: 310mm, throat depth: 200mm, table width: 180mm, table-to-floor distance: 910mm, closing speed: 80mm/s, working speed: 8mm/s, return speed: 60mm/s, oil capacity: 120l, weight: approx. 8200kg. 2) Press brake LVD PPBL-H 165/40, year of manufacture: 1993, pressing force: 1650kN, working length: 4000mm, distance between uprights: 3150mm, ram stroke: 150mm, table-to-ram distance: 350mm, throat depth: 250mm, table width: 180mm, table-to-floor distance: 930mm, closing speed: 80mm/s, working speed: 7.5mm/s, return speed: 70mm/s, oil capacity: 150l, weight: approx. 10500kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible.
teklif 25247 Özellikler: baskı kuvveti 50 t - Maks.ram stroku yakl. 260 Milimetre - Kaldırma hızı hızlı yakl. 1540 mm/dak - Kaldırma hızı yavaşça yaklaşık. 210 mm/dak - Stand genişliği yakl. 770 Milimetre - Stand derinliği yakl. 195 Milimetre - Min. / maks. montaj yüksekliği yakl. 200 / 1100 mm - Masa yüksekliği ayarlanabilir, her biri yaklaşık 5 geçmeli cıvata ızgarası. 180 Milimetre - Destek plakası yakl. 450 x 450 mm boyutlarında - El krank kablosu ile tabla yükseklik ayarı - Sürücü 400 V / 1,5 kW - Alan gereksinimi yakl. G 1750 x Y 2100 x D 850 mm - Ağırlık yakl. 600 kg
pressure: 60 tthroat: 280 mmstroke: 10-140 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 740x560 mmram surface: 380x195 mmhole in the table: 300x200 mmtable height: 760 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tthroat: 220 mmstroke: 8-96 mmno. of strokes: 120 Hub/minram - range of adjustment: 50 mmtable surface area: 580x440 mmram surface: 305x170 mmhole in the table: 215x175 mmtable height: 870 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 tthroat: 230 mmstroke: 4-80 mmno. of strokes: 120 Hub/minram - range of adjustment: 55 mmtable surface area: 695x455 mmram surface: 365x180 mmhole in the table: 220x180 mmtable height: 890 mmtool hole in ram: Ø 40 mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tthroat: 300 mmstroke: 10-140 mmno. of strokes: 60 Hub/minram - range of adjustment: 60 mmtable surface area: 800x500 mmram surface: 430x230 mmhole in the table: Ø150 mmtable height: 860 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 170 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC ModEva 10 S column arm: 405 mmstroke of ram: 400 mmdistance between table / ram: 320-720 mmfeed down: max. 220 mm/secfeed bending: max. 10 mm/secfeed up: max. 220 mm/secconnected load: 27 kVAtotal power requirement: 18,5 kWweight of the machine ca.: 13.600 kgdimensions of the machine ca.: 4200x2000x3000 mmDomestic equipments:Stop support adjustment- Stop area XM-axis (from bending line): 0-1005 mm- Adjustment speed XM-axis: max. 1200 mm/sec- Drive power XM-axis: 0.85 kW- Stop area XS-axis (from bend line): 0-1005 mm- Adjustment speed XS-axis: max. 1200 mm/sec- Drive power XS-axis: 0.85 kWHeight adjustment- Adjustment range R-axis (from table surface): 65-265 mm- Adjustment speed R-axis: max. 200 mm/sec- Drive power R-axis: 1.25 kWDie shift - Adjustment via backgauge (MVX)- Adjustment range: max. 100 m ...
Basınç: 25 Tboğaz: 200 mmStrok: mmBasınç: 25 tNo. Vuruş sayısı: 140 Çerçevedeki göbek/minpencere: 240 mmstrok ayarı: 8...80 mmram - ayar aralığı: 50 mmram ram yüzeyi: 355 x 220 mmmasa boyutu: 560 x 400 mmMasada delik: 160 mmtoplam güç gereksinimi: 3 kWmakinenin ağırlığı yaklaşık: 2,23 tMakinenin boyutları ca.: m- mesafe tablası kızağı: 250 mmBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
Bir Hämmerle hidrolik abkant pres mevcuttur. Baskı kuvveti: 2000kN, çalışma uzunluğu: 2600mm, montaj yüksekliği: 830mm, strok: 265mm, boğaz derinliği: 300mm, hızlı travers: 100mm/s. Makine boyutları X/Y/Z: yaklaşık 3750mm/2600mm/3600mm, ağırlık: yaklaşık 16000kg. Makine çalışmıyor. Belgeler mevcut. Yerinde inceleme mümkündür.
basınç: 200 tchamfer uzunluk: 3050 mmsütunlar arası mesafe: 2550 mmram stroku: 274 mmkontrol: Cybelec ModEva Pac toplam güç gereksinimi: kWmakinenin ağırlığı ca.: 17.000 kgmakinenin boyutları ca.: mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
pressure: 62 tdistance between columns: . mmstroke: 360 mmTable area: 2500x580 mmdayligth: 400 mmdiameter - coniflex cutter: Zilinderdurchmesser 200 mm0: 200 barStud passage: 590 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVideo: https://www.youtube.com/watch?v=gkuLoo7ABkcThe tech. Data aremanufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ...
pressure: 120 tchamfer lenght: . mmdistance between columns: 2550 mmstroke: 200 mmtotal power requirement: 13,2 kVANumber of working hours: 2500 htotal power requirement: kWweight of the machine ca.: 8,3 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 150 t: 3100 mm: 2600 mm: 400 mm: 200 mm: 600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
basınç kapasitesi maks.: 80 tStrok: 500 mmtabla yüzey alanı: 960 x 810 mmmil aralığı: 72 sütunlar arası gün ışığı: 950 / 540 mmGeçiş: 640 mmMakine ağırlığı ab.: 4500 kgMakinenin boyutları ca.: 2,0 x 2,0 x 3,85 mHidrolik hızlı ayar 500mmVolan 2000mmDoğrultma dalgaları için 4 prizma tabanlarıfarklı destek çerçeveleriBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
teklif 25200 Özellikler: - Basınç kapasitesi 200 t - Çalışma genişliği 3100 mm - Dikmeler arası geçiş 2600 mm - Tabla genişliği 180 mm - Projeksiyon 300 mm - Montaj yüksekliği 450 mm - Besleme hızı 80 mm/sn. - Çalışma hızı 9 mm/sn. - Geri çekme hızı 60 mm/sn. - Ram darbesi 120 mm - Ayar aralığı sabit durdurucular 120 mm - Sürücü 400 V / 18,7 kW - Alan gereksinimi yakl. G 3300 x Y 2950 x D 1900 mm - Ağırlık yakl. 10500 kg - İle: - Sıkma derinliği + balyalama basıncının ayarlanması -Muayene. El çarkı ince ayarlı arka dayama - 4 katlı üniversal kalıp - bileme aleti - Çift el kontrol paneli, ayak pedalı,
teklif 25227 Özellikler: - Basınç kapasitesi 150 t - Çalışma genişliği 3600 mm - Dikmeler arası geçiş 3150 mm - Tabla genişliği 180 mm - Projeksiyon 250 mm - Montaj yüksekliği 325 mm - Besleme hızı 70 mm/sn. - Çalışma hızı 7 mm/sn. - Geri çekme hızı 60 mm/sn. - Ram darbesi 120 mm - Ayar aralığı sabit durdurucular 120 mm - Motor gücü yakl. 7,5 kW - Yağ doldurma yakl. 300 Lt - Alan gereksinimi yakl. G 3850 x Y 2300 x D 1600 mm - Ağırlık yakl. 8700 kg - ile: - Döner kol – ATL 550 kontrollü kontrol paneli - Sıkma derinliği + arka dayama için -Muayene. Arka dayama - Taçlandırma cihazı - Lazer Güvenli FIESSLER - 4 katlı üniversal kalıp, bölünmüş bileme aleti + geyik ayağı aleti - Çift el kontrol paneli, ayak pedalı,
delme basıncı: yaklaşık 3,2 hava basıncı: 8 barstrok: maks. 20 mmSütunlar arası mesafe: yaklaşık 250 x 200 mmMakinenin ağırlığı yaklaşık: 52 kgdahil. çeşitli araçlar, resimlere bakınBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
Pressure power: 6-8 barAir consumption: 8 l/Hubheight of stroke: 12 mm: 134 mmno. of strokes: 400 Hub/minpunching force max.: 3500 kpweight of the machine ca.: 80 kgSchüco pneumatic press for Schüco punching toolsArt. No. Schüco: 290 124manual includedvarious pressing tools included!tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 2830722 quick-release levers for secure and quick fastening of the press toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 500 tdistance between columns: 1220 mmmax. ram stroke: 600 mmdistance table/ram, max. stroke up, adjustment up: 1000 mmtable surface area: 1600 x 1200 mmdie-cushion pressure inside the table: 320 tstroke of drawing cushion in table: 150 mmdrawing cushion surface in table: 750 x 812 mmdie-cushion pressure in pusher: 180 tstroke of drawing cushion in pusher: 100 mmdrawing cushion surface in pusher: 750 x 625 mmram surface: 1600 x 1200 mmtable height over floor: 800 mmfeed down: 665 mm/secfeed up: 530 mm/secworking feed: 34 - 100 mm/secquantity of oil: 2000 lpower capacity: 180 kWweight: 40 tdimensions of the machine ca.: 3,2 x 2,4 x 7,5 mby using oil-hydraulic drive, hydraulic and electric controlUVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinetOur list price is WITHOUT starting the machine,just as it isThe da ...
pressure: 40 tdistance between columns: 495 mmstroke: 150 mmdistance table/ram, max. stroke up, adjustment up: 300 mmtable surface area: 490 x 400 mmhole in the table: 50 mmtable height over floor: 950 mmcolumn travel -side: 155 mmram surface: 150 mmfeed down: 480 mm/secfeed up: 480 mm/secworking feed: 20 mm/secoil volume: 115 lpower capacity: 7,5 kWweight: 2,2 tdimensions of the machine ca.: 1,35 x 1,00 x 2,21 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tthroat: 280 mmstroke: 8 - 112 mmno. of strokes: 30 - 120 Hub/mindistance table/ram, max. stroke up, adjustment up: 500 mmtable surface area: 840 x 580 mmhole in the table: 150 mmtable height over floor: 910 mmpassage to the back: 640 mmram surface: 560 x 300 mmram adjustment: 80 mmpower capacity: 7,5 kWtotal power requirement: kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 1,4 x 2,3 x 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tthroat: 200 mmstroke: 8 - 80 mmno. of strokes: 180 Hub/mindistance table/ram: 330 mmtable surface area: 550 x 400 mmhole in the table: 60 mmtable height over floor: 800 mmtable height over floor: 800 mmpassage to the back: 200 mmram surface: 355 x 220 mmram adjustment: 50 mmpower capacity: 2,5 kWtotal power requirement: kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1,2 x 1,8 x 2,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sac Genişliği: 3000 mmPlaka kalınlığı: 16 mmÖn Bükme: / Makinenin ağırlığı ca.: 15 tMakinenin boyutları ca.: mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
pressure: 125 tno. of strokes: 55 Hub/minstroke: 20 - 160 mmtable-size: 970 x 660 mmmax. ram stroke: 160 mmmin. ram stroke: 20 mmthroat: 340 mmtotal power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: 1,5 x 3,0 x mWith motor, gear reduction, wheel protection, air friction clutch, additional brake(Make Desch) and safe control according to UVV,Mech. Overload protection in the ramTwo-hand operation, control cabinetThe price is ex stock as the press is, is, or is.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tthroat: 280 mmstroke: 8 - 100 mmno. of strokes: 65 Hub/minram adjustment: 63 mmtable surface area: 620 x 500 mmdistance table/ram, max. stroke up, adjustment up: 415 mmhole in the table: 230 mmtable height over floor: 800 mmram surface: 310 x 255 mmpower capacity: 5,5 kWtotal power requirement: kWweight of the machine ca.: 3,95 tdimensions of the machine ca.: 1,20 x 1,80 x 2,40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Adet: 1 İkinci el alüminyum ekstrüzyon pres hattı Kod Alüminyum HE9 6063 Mfc .: Hintli üretici Yapım: 1978 PLC hidrolik – yükseltme 2005 yılında yapıldı! Toplam Baskı Kuvveti: 680 MT, 750 UST Ekstrüzyon Basıncı: 210 Bar Kütük Çapı: 5", 121 mm Kütük İnç Başına Ağırlık: 0,76 kg/inç Tedarik kapsamı: Kütük ısıtma fırını Sıcak kesme Ekstrüzyon presi Üstten çektirme Yatak altı soğutma sistemi Tükenme soğutma yatağı Bantlı konveyör Sedye Kesme makinası Kalıp fırını Konveyör tablası Son paketleme için konveyör
plate width: 3200 mmplate thickness: 83 mmpre-bending: 72 mmroll diam. toproll: 700 mmroll diam. bottom roll: 650 mmside roll diameter: 550 mmdistance between columns: 3300 mmroll drive: 93,2 kWturning speeds: 2 - 4 m/mintotal power requirement: - kWweight of the machine ca.: 78 tdimensions of the machine ca.: 9 x 3,3 x 3,4 m4 –Roll Bending Machine- 4 roll Pinch bending- Pre-bending- Tilting function-- Hydraulic front bearing tilting speed: 450mm/min-- Hydraulic tilting of top roll: 250mm/min- CE2 Units availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
