çevresel ekipman (örneğin ısıtma soğutma kurutması) kullanılmış satılık

Refrigeration equipment: 200,000 frigories, with 2 compressors (one for repair), brand: Bitzer 60 amps. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 voltage: 400 VSuction depth: 180 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drying centrifuge: 1 x 0.5 m Ø diam. Engine: 30 Kw (40 hp) at 2940 rpm.

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 voltage: 400 VSuction depth: 85 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refrigeration equipment. Brand: Ferroli, model: RGA IR200.2VB AB OM5. J020, frigories: 198.000, power: 71.6 Kw, Amp: 170, gas: R410A.

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 mvoltage: 400 VSuction depth: 120 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overhead cutting to water, make: PRT, model: WF 55, engine: 0.55 Kw, year: 2002. Stainless steel centrifuge: 2.2 Kw. Water pump: 1.1 Kw. With electrical panel.

coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 60 l/mintotal power requirement: 0,16 kWvoltage: 230 V0: 1/2 mmSuction depth: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cold equipment Brand: Maper, Model: MP-340, 72 amps, stainless steel, engine: 33,28 kw, gas: R407C, year 2008.

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 voltage: 230 VSuction depth: 85 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Water-based head cutting, brand: Gamma Meccanica, type: TFD150, year: 1996. Centrifuge: 4 hp (3 kw).

coolant capacity: 16 l/minCapacity: - Wattconveying height: 2,5 total power requirement: 60 Wattvoltage: 48 Vdepth: kompl. mm0: 11,5 mmA submersible pump that has been developed to be completely in the cooling fluidTo be submerged.It is mainly used in small machines withLow coolant use (for example, sawing and drilling machines).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gravimetric dispenser Brand: Maguire. For 4 different materials plus master dispenser. No electrical panel.

coolant capacity: 14 l/minCapacity: 60 Wattconveying height: 4,2 voltage: 230 / 400 V0: 3/8 mmSuction depth: 85 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Head for sheet: 1.45 with 3-roller calender: 1.45 m x 300 mm Ø, brand: Khune. Stretching and cuttering. Brand: Khune with film sheet weighing unit.

coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 V0: 1/2 mmSuction depth: 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New brand centrifuge: GESTER, model: CG-1200V. Shaft length: 1.2 m and axis diameter: 0.5 cm. Engine: 50 hp at 3000 rpm. Pneumatic piston for cleaning on top. Electrical panel with triangle star.

coolant capacity: 65 l/minCapacity: 0,12 Wattconveying height: 5 mliter capacity: 65 l/mintotal power requirement: 0,16 kWvoltage: 400 (230) V0: 1/2 mmSuction depth: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vacuum cleaner for transporting solids. Motor: 15 Kw, diameter: 700 mm, width: 250 mm. Inlet tube: 200 mm, outlet tube: 200 mm.

coolant capacity: 14 l/minCapacity: 60 Wattconveying height: 4,2 voltage: 230 / 400 V0: 3/8 mmSuction depth: 120 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw compressor, make: Worthington Creyssensal, model: RLR 4000 AX2, motor: 30 Kw (40 hp), Bar max: 8, m3/h: 318, working hours: 16.159.

coolant capacity: 16 l/minCapacity: - Wattconveying height: 2,5 total power requirement: 60 Wattvoltage: 230 Vdepth: kompl. mm0: 11,5 mmA submersible pump that has been developed to be completely in the cooling fluidTo be submerged.It is mainly used in small machines withLow coolant use (for example, sawing and drilling machines).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 160 °C

Temperature control unit for tools - HB-Therm HB-160Z1 (2pcs.) Year of construction: 2010-2014 Description: Max. heating capacity - 160°C Heat Transfer Fluid – Water Heating capacity: 8 kW Cooling capacity: 30 kW Device has: - a vacuum pump - a vacuum chamber - a function to extract medium from the tool - The device can be integrated with the machine, unattended All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 voltage: 400 VSuction depth: 200 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Oktomat SOS Bj2010 and 2009 fully functional. Also available for sale single at half price

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 voltage: 400 VSuction depth: 250 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 95 , 9

ready to work, 9 kW, 95 C

coolant capacity: 16 l/minCapacity: - Wattconveying height: 2,5 total power requirement: 60 Wattvoltage: 24 Vdepth: kompl. mm0: 11,5 mmA submersible pump that has been developed to be completely in the cooling fluidTo be submerged.It is mainly used in small machines withLow coolant use (for example, sawing and drilling machines).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 95 , 9

ready to work, 9 kW, 95 C 2 pcs. available momently

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 voltage: 230 VSuction depth: 180 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.