presler kullanılmış satılık (1,770)

Machining center and extruded profile plant for car sill production, consisting of:, Processing machines:, - Anger machine SP2-X2000 (machine number AA100264-11), - Anger machine SP2-X2000 (machine number AA100264-12), - 2x coolant treatment, Assembly of components (robot cell for sills):, - Robot 1 KUKA KR120 R3200 PA, - Gripper for robot 1, - Labeling station, - Robot 2 KUKA KR120 R3500, - Gripper for robot 2, - Robot/machining center interface, - Cleaning unit for components, - Assembly machine 2 lanes, - Robots 3 and 4 for handling, - Drawer system with parts inserts, - Screwing station, - Adhesive application station, - Platform, - Robot 5, - Gripper for robot 5, - Pallet parking space, - Safety enclosure, - Electrical control and integration, Further information on request.

nominal power: 63 tstroke rate in continuous stroke: 90 minforce: 2200 NmTorque: 12500 NmLabour performance: 5,5 kWsheet thickness - max.: 6,3 / 3,2 mmcutting surface: 1600 mm²distance between columns: 320 mmthroat: 315 mmmin. ram stroke: 8 mmmax. ram stroke: 120 mmram adjustment: 70 mmram surface: 400 x 500 mmtool hole in ram: 40 mmtool shank hole (depth x diameter): 92 mmT-slots: 2 Stktotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tpassage width: 1350 mmstroke: 300 mmtotal power requirement: 16 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 2,0 x 1,8 x 3,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

basınç: 500 tGeçiş genişliği: 750 mmstrok: 120 mmtoplam güç gereksinimi: 57 kWmakinenin ağırlığı ca.: 16 tMakinenin boyutları ca.: m

pressure: 10 tdistance between columns: 500 mmstroke: 200 mmtotal power requirement: 10 kWweight of the machine ca.: 4.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

basınç: 125 tsütunlar arası mesafe: 1050 mmstrok: 250 mmtoplam güç gereksinimi: 40 kWmakinenin ağırlığı ca.: 8,5 tMakinenin boyutları ca.: m

pressure: 34,0 kNstroke: 40 mmthroat: 130 mmWorking height from to: 80 - 240 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 80 Kgdimensions: 375 x 200 mmToggle pneumatic pressesincl. working height fine adjustment via bevel gear with lateral crankcomfortable and easily adjustable.Toggle lever pneumatic presses are to be used when the maximumpressure is required shortly before the end of the stroke, e.g. when assembling, punching,embossing, caulking, etc.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tthroat: 360 mmstroke: 560 mmtotal power requirement: 33 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: 2000x2400x3650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basınç: 10 tstrok: 200 mmMasa boyutu: 450 x 450 mmÇalışma hızı:: 10 mm / sn.maksimum çalışma yüksekliği: 940 mmalet yüksekliği maks.: 150 mmtoplam güç gereksinimi: 1,1 kW: 150 x 6 mmağırlık: 0,4 tBoyutlar: 1,15 x 0,5 x 0,9 mmYatay bükme makinesi:- NC kontrolü- Çift ayak pedalı- Standart alet seti

pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basınç: 40 tStrok sayısı: 500 Hub/dakSac genişliği: mmtoplam güç gereksinimi: 5,5 kWMakinenin ağırlığı ca.: tMakinenin boyutları ca.: m

Basınç: 40 tMasa uzunluğu: 670 mmMasa genişliği: 570 mmToplam güç gereksinimi: kWMakinenin ağırlığı ca.: tMakinenin boyutları ca.: m

pressure: 20 tstroke: 180 mmdaylight between the columns: 540 x 100 mmdayligth: max. 990 mm: 72 mmdiameter of piston: 48 mmweight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,8 x 0,7 x 1,8 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tstroke: 180 mmdaylight between the columns: 335 x 115 mmdayligth: max. 340 mm: 56 mmdiameter of piston: 40 mmweight of the machine ca.: 0,05 tdimensions of the machine ca.: 0,75 x 0,53 x 1,6 mOur frame presses are officially CE certified according to the latest rules.Almost all presses offered in this area are not CE certified.- with manual hydraulics- Move the cylinder sideways- Pressure gauge- 2 press documentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tthroat: 250 mmstroke: 100 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3200 kgdimensions of the machine ca.: 1000 x 1700 x 2600 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tpassage width: NA mmstroke: 180 mmtable length: 690 mmtable width: 530 mmdistance between columns: 420 mmtotal power requirement: 18 kWweight of the machine ca.: tdimensions of the machine ca.: mHydr. 4-Pillar Press for Embossing/CalibrationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 tcolumn daylight: 2600 mmstroke: 800 mmtable surface area: 6000 x 3000 mm: max. 800 mmadjustment of press crosshead: 5200 mmslide adjustment -horizontal: 1800 mmCapacity: 162 l/minfeed down: 9 mm/secfeed up: 14 mm/sectotal power requirement: 45 kWweight of the machine ca.: 50 t- Hydraulics : Rexroth- Controls : Tailor- Cylinder chromed- Operation via remote control & joystick- Stroke length adjustable via sensors- Pressure adjustable via PLCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 26,0 kNstroke: 60 mmthroat: 110 mmWorking height from to: 70 - 250 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 46 Kgdimensions: 310 x 140 x 475 mmKnee lever hand presses SPECIAL PRICE!HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear withcomfortable and easy to adjust with a side crank.Stand height 475 mmEven more pressure in production without additional effort.Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology.Particularly stable construction of the spindle head and columnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tthroat: 0 mmstroke: 400 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mD U N K E S (Germany)CNC Controlled Hydraulic Double Column PressModel HD 10Year 1993________________________________________________________Pressure 10 tons Ram stroke 400 mmMounting height 600 mmTable size 400 x 300 mmTable height above floor 820 mmRam area 400 x 300 mmRam bore 40 mmQuickspeed, downwards, max. 70 mm/sWorking speed, downwards, using max. pressure 40 mm/sWorking speed, min. 5 mm/sWorking speed adjustable from  ...

teklif 24591 Özellikler: baskı kuvveti 25 t ram stroku 500 mm - Kaldırma hızı 0 - 40 mm/s - Dönüş 0 - 200 m/dk - Montaj yüksekliği 800 mm - Koçun ortasına projeksiyon 360 mm - İtici sıkıştırma yüzeyi 440 x 360 mm - Piston sıkıştırma pimi 40 mm - Masa boyutu 630 x 500 mm - Zeminden masa yüksekliği 710 mm - Termoform kuvveti 10 t - En büyük derin çekme derinliği 160 mm - Sürücü 400 V / 4 kW - Alan gereksinimi yakl. G 800 x Y 2720 x D 1150 mm - Ağırlık yakl. 2500 kg

Basınç: 28 tSütunlar arası mesafe: 510 mmGün ışığı: 380 mmStrok: 260 mmMakinenin ağırlığı yaklaşık: yaklaşık 750 kg

teklif 25100 Özellikler: - Basınç kapasitesi 200 t - Çalışma genişliği 3050 mm - Dikmeler arası geçiş 2550 mm - Tabla genişliği 180 mm - Projeksiyon 250 mm - Montaj yüksekliği 400 mm - Besleme hızı 80 mm/sn. - Çalışma hızı 6,7 mm/sn. - Geri çekme hızı 67 mm/sn. - Piston stroku 150 mm - Ayar aralığı sabit durdurucular 120 mm - Sürücü 400 V 14,5 kW - Alan gereksinimi yakl. G 3800 x Y 2980 x D 1700 mm - Ağırlık yakl. 11500 kg - ile: - 2 durdurma parmağı ile arka dayama - Geyik ayağı aleti - 4 katlı üniversal kalıp - Çift el kontrol paneli, ayak pedalı,

pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 52/80 Hub/minram - range of adjustment: 60 mmtable surface area: 850x550mm mmram surface: 420x220 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø 45 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 2000x2000x2700mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

basınç: 35 tpah uzunluğu: 2000 mmmakinenin ağırlığı ca.: 3 ttoplam güç gereksinimi: kWsütunlar arası mesafe: mmMakinenin boyutları ca.: mbasınç 35 ilamaks. bükme uzunluğu 2000mmtahrik kapasitesinin arkasındaparafudr 4,5 kWağırlık 3000kg

pressure: 1 tStroke: 315 mmtable surface area: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Genel Üretici firma: Transmatic Türü: TS-3M Yapım Yılı: 2007 Tabak boyutu: 38 x 38 cm Maksimum basınç: 600 g/cm2 Sıcaklık ayarı: 50 – 305°C Koşul Durum: Kullanılmış Fonksiyonel: Test edilmiş ve tamamen işlevsel

Adet 1 İkinci el ekstrüzyon pres hattı – depoda – hiç kurulmamış! Mfc.: Koreli Üretici Gücü: 1650 UST İnşa: 2024 Türü: Doğrudan Tek Etkili Yatay Kısa Stroklu Geri Yükleme Alüminyum Hidrolik: Rexroth PLC: Mitsubishi Kütük çapı: 152 mm (6 inç) Uzunluk: 400 – 750 mm Konteyner boyutu: Φ157 mm × 800 mm Çıkış deliği boyutu: Φ180 × 250 mm Konteyner Boyutu İç Çapı: 164 mm (6 ̋) Uzunluk: 700 mm Ana Ram Stroku: 1200 mm Tedarik kapsamı: Yükleme Kaldırma Sistemi Kütük İtme İndüksiyonlu ısıtma Fırını Pres Soğutma Sistemine Kütük Besleme için Kütük Konveyör Sıcak Testere Salgı Masası Çift Çektirme Sedye Bitirme Testeresi Kalıp Fırını Yaşlandırma Fırın�

pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• CNC-control DELEM DA65 graphic video• manual back-off turning• upper and lower tool• 2 manual control / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Basınç: 75 tstrok: 250 mmGün ışığı Boyuna/yanlara: 800 x 215 mmGün ışığı: 170 - 885 mmÇalışma basıncı: 7,5 - 8,5 barMakinenin ağırlığı yaklaşık: 0,45 tBoyutlar: 1,2 x 0,8 x 2,1 mmHidrolik/pnömatik atölye presiSilindir yana doğruhareket ettirilebilir pnömatik ayak pedalıMasa yükseklik ayarıiçin vinç 2 adet. pres bloklarıCE işareti