Işlem merkezleri

SBZ 140 Profile machining centre 6,4m 4-axis from Elumatec.

5-axis machining centre with 10-fold tool changer for aluminium or PVC profiles Max. machining length: 6,000 mm Y-axis travel: 1000 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Weight: approx. 7,000 kg Minimum Quantity Spraying Tensioner detection and automatic displacement Pendulum operation through two light barrier areas Handheld control panel Spindle in top condition, 16 kN pulling force Lots of tool holders, including saw blade Loading is included in the price Service report from March 2024 from Elumatec is available

5-axis machining centre with 10-fold tool changer for aluminium or PVC profiles Max. machining length: 12,000 mm Y-axis travel: 1000 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Weight: approx. 11,000 kg Minimum Quantity Spraying Tensioner detection and automatic displacement 20 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Conveyor belt Lots of tool holders, including saw blade Loading is included in the price The machine is already dismantled in our warehouse. Function video can be sent. The spindle was overhauled by the manufacturer (cost over 15,000 €)

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 15,000 mm Y-axis travel: 1150 mm Z-axis travel: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum Quantity Spraying Tensioner detection and automatic displacement 16 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Num calculator has been updated to Windows 10 control Spindle has been completely overhauled by the manufacturer (6-month warranty) Loading is included in the price, machine is dismantled in our warehouse Weight: approx. 14,500 kg

SBZ 151/60 5 axles with cut 7.3m from Elumatec as good as new. Less than 500 working hours have been commissioned and maintained by Elumatec. Original price € 421,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

Elumatec Cutting Edge & Machining Center For more information, please contact us

SBZ 630/11/R machining center from Elumatec in mint condition. The machine has only been put into operation by Elumatec, otherwise never used. Original price € 636,000.00 net ex works Elumatec. For more information, please call us. The price is from stock Baku excluding transport costs and dismantling. It can also be done on request including delivery to DE.

x-travel: 400 mmy-travel: 300 mmz-travel: 300 mmcontrol: Jasnac tool taper: BT30 Tools changer for 12 tools: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 1000 mmz-travel: 1000 mmB-axis (table): Table dimensions: 800x800 mmTable load: 2500 kgtable indexing - automatic: 360 °rapid travel - grinding spindle: 15 m/minFeed: 1-15000 mm/minfeed power: 23000 N: 10 min-1spindle drive: 34 kWmax. torque on the spindle: 1644 Nmturning speeds: 10-4500 U/mintransmission ratio: 3 spindle diameter: 130 mmspindle taper ISO: 50 Tool changer: 40 Control: Siemens type: 810 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1016 mmy-travel: 508 mmz-travel: 508 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-MC CNC controlelectronical handwheel21-fold tool changercoolant devicechip tankTechnische Daten / technical details:X-Weg / X-travel 1016 mmY-Weg / Y-travel 508 mmZ-Weg / Z-travel 508 mmSpindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 10000 UpM /rpmEilgang / rapid feed 25 m/minTischaufspannfläche / table clamping area 1219x508 mmWerkzeugwechselmagazinplätze / number of tool places in changer 21 Antriebsleistung Spindel / drive capacity spindle 11/17 kWGewicht ca. / weight ca. 5000 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was created wit ...

Weight: approx.4500 KG mash. No.: 6517991 General/technical data: Vertical CNC machining center in a very good, almost new condition, first-hand with very little operating hours. Travel: X= 670 Y=450 Z=470 mm Rapid response: in X and Y = 24m/min, in Z =20m/min Spindle motor: 10 KW Spindle speed: from 50 to 4,500 rpm Spindle cone: SK 40 Control: Siemens 810 M GA 2 Dimensions clamping table: 900 x 420mm max table load: 300 kg Distance spindle head to top of the table: 630mm spindle center to stand face: 470mm Tool slots in the magazine: 24 pieces DIN ISO 40 max. tool diameter: 110mm to 125mm tool length 100mm to 280mm tool length Beuvvquh2i Dimensions of the machine approx.: 2200 x 3000 x 2950 mm (without operator, service and chip conveyor environment) Accessories/ Optional equipment: â?¢ external coolant system with 2 pumps â?¢ Chip conveyor with ...

x-travel: 2.000 mmy-travel: 1.000 mmz-travel: 800 mmControl: Fidia C20 CNCMain spindle:: turning speed range - main spindle: 3.200 - 32.000 min/-1power capacity - main spindel: 6 kWtool taper: HSK 40 E swivellable: B: +/- 110 °indexing: B: 0,001 °rotatable: C: +/- 361 °spindle diameter in front bearing: 45 mmdistance spindle nose and table: max. 896 mmwork table:: table surface area: 2.500 x 1.500 x 300 mmtable height: 345 mmmax. table load: 10.000 kgT-slots: 6x 22 x 250 mmTool-Presetter:: number of toolpositions: 20 pos.tool taper: HSK 40 E feeds:: rapid traverse ( X / Y / Z ): 20 m/minAccelaration: 3 m/s²total power requirement: - kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 6,0 x 4,0 x 3,8 mDocuments: spindle oil cooler: hydraulic system: Automatic Tool Changer: tool setting: Laser tool holders: 16x CNC-Machiningcenter UniversalFIDIA - D 218- 5-Axis- C ...

x-travel: 1500 mmy-travel: 800 mmz-travel: 700 mmtable surface area: 1760 x 700 mmspindle taper: SK 40 spindle turning speed - stepless: 8000 U/minspindle drive: 15 kWfeeds: 1 - 8000 mm/minrapid traverse X/Y/Z axis: 15 / 15 / 12 m/mintable load: max. 2500 kgspindle throat: 760 mmATC: 40 Poscontrol: HEIDENHAIN, TNC 530 total power requirement: kWweight of the machine ca.: 12,5 t- with coolant through spindleAccessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant- geometrical overhauled in 2022 -- new ball bearing spindle installed on Y-axis in NOV. 2022 -- the magnetic plates shown on the photo are not included -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 855 mmz-travel: 750 mmtable surface area: 570 mmclearance diameter: 720 mmworkpiece weight: 400 kgpivoting angle: -185 / +45 Gradtable rotation speed: 50 U/mintool taper: HSK-A 63 spindle turning speed - stepless: 12000 U/minspindle motor: 40 kWtool diameter: 70 mmtool length - max.: 365 mmweight of tools max.: 8 kgrapid travel range: 70/45/90 m/mincontrol: Heidenhain iTMC 530 total power requirement: 47 kVAweight of the machine ca.: 13 tdimensions of the machine ca.: 6,1 x 2,47 x 3,17 mThe 5-axis universal machining center G350 offers nearly unlimitedpossibilities in the milling of workpieces of various materials.materials.equipped with:- CNC control Heidenhain iTNC 530- NC swivel rotary table (A-/B-axis)- tool changer 40 places (HSK A63)- IKZ / coolant system 3-22,5bar- chip conveyor2 identic machines availableThe data for this ad was created with ModulMWS - t ...

x-travel: 600 mmy-travel: 855 mmz-travel: 750 mmtable surface area: 400 x 400 mmclearance diameter: 720 mmpivoting angle: -185 / +45 Gradworkpiece weight: 340 kgtable rotation speed: 50 U/mintool taper: HSK-A 63 spindle turning speed - stepless: 12000 U/minspindle motor: 40 kWtool diameter: 70 mmtool length - max.: 365 mmweight of tools max.: 8 kgrapid travel range: 70/45/90 m/mincontrol: Heidenhain iTMC 530 total power requirement: 54 kVAweight of the machine ca.: 15 tdimensions of the machine ca.: 6,1 x 2,47 x 3,17 mThe 5-axis universal machining center G350 offers nearly unlimitedpossibilities in the milling of workpieces of various materials.materials.equipped with:- CNC control Heidenhain iTNC 530- 2-fold Pallet Changer- NC swivel rotary table (A-/B-axis)- tool changer 40 places (HSK A63)- IKZ / coolant system 3-22,5bar- chip conveyorThe data for this ad was created with ModulMWS -  ...

x-travel: 800 mmy-travel: 1020 mmz-travel: 970 mmControl: HEIDENHAIN iTNC 530 : 18000 min/-1Feeds (X,z,u,w-axis): 29 / 39 kWtool taper: HSK 63 : 60 Pos.rapid travel x/y/z: 65/50/80 mm/mintable diameter: 630 x 630 mmtable load capacity: 700 kgmax. workpiece diameter: 900 mmA-Axis: -185 / +45 °b-axis: 360 °total power requirement: 42 kVAweight of the machine ca.: 22 tdimensions of the machine ca.: m5-axis BAZEquipped with:- CNC control HEIDENHAIN iTNC 530- pallet changer 2-fold (630x630mm)- tool changer 60-fold (HSK-A63)- Swivel rotary table (A-/B-axis)- IKZ 4-38 bar- chip conveyor- belt filter system- spindle cooling6 Machines availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis machining center with 2-fold pallet changer Travel x/ y/ z = 600/ 770/ 675 mm Swivel/rotary table (A/B axis) Pallet changer 2-fold Pallet size 400x400 mm Spindle speed up to 16,000 1/min Spindle power 160/ 223 Nm Tool magazine 34-fold + additional magazine 99 tool positions Tool holder HSK 63 - Control Siemens 840D sl - Additional magazine TM99 - Automatic opening/closing for manual loading and unloading - Pallets with fluid connections (coupling connections) - Electromechanical tool length device - Infrared probe Renishaw - Internal coolant supply, infinitely variable up to 38 bar - Handheld control unit - Workspace extraction - Remote machine diagnostics - Brankamp machine protection system - Hydraulic clamping of the workpieces on the pallet

General: Year of construction 2009 Control Haas Travel X 1,016 mm Y 508 mm Z 632 mm Spindle: Tool holder SK40 Tool changer: Number of stations 40 times Other equipment and accessories: Cavity cooling IKZ Programmable cooling on the headstock Oil mist extraction Preparation of the Renishaw wireless pushbutton Chip auger

x-travel: 1016 mmy-travel: 508 mmz-travel: 635 mmcontrol: Haas total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machining center vertical S - plus 10 Manufacturer: Hartford BJ: 2016 Control Heidenhain ... TNC 640 Clamping table area ... 1150x520mm Axis X ... 1020mm Axis Y ... 520mm Axis Z ... 550mm Spindle speed ... 12000-_/min. controlled axes... 3 cooling ... 20bar ISO 40 Magazine places... 24 chip Conveyor Workpiece probe The machine is in good condition, possible to test under power.

x-travel: 2500 mmy-travel: 800 mmz-travel: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain TNC 42640-fold automatic tool changerchip conveyorcoolant through spindle (IKZ)Technische Daten / technical details:X-Weg / X-travel 2500 mmY-Weg / Y-travel 800 mmZ-Weg / Z-travel 700 mmSpindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 6000 UpM /rpmVorschub / infeed 30 m/minTischaufspannfläche / table clamping area 3200x800 mmWerkzeugwechselmagazinplätze / number of tool places in changer 40 Antriebsleistung Spindel / drive capacity spindle 44 kWGewicht ca. / weight 17500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was  ...

Key data: 2100 mm, 520 mm, 500 mm

Hedelius CB 50 Year of construction: 1999 Control: Heidenhain TNC 426 Vertical Machining Center X-axis: 2100 mm Y-axis: 520 mm Z-axis: 500mm Spindle 7000rpm Tool changer 30 times Rapid traverse 40m Only 21950 spindle hours Axial angular angle deep rupture ball bearings, as well as drive belts in X and Y new

x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roofThe data for this ad was created wit ...

Machine type Machining center universal BAZ Manufacturer Heller Model MCS-H / U 300 Year of construction 2002 Condition good (used) Specifications Bright MCS-H/U 300 Year of construction: 2002 Control: Siemens 840 D Workspace: Longitudinal stroke X-axis 1000 mm Vertical stroke Y-axis 800 mm Transverse stroke Z-axis 1100 mm Lifting position longitudinally to the center of the table MCS-H X-axis +500 to -500 mm Lifting position vertically over. Palettes. MCS-H Y-axis +120 to +920 mm Lifting position transverse to the center of the table MCS-H Z-axis +200 to +1300 mm Guidance system: Linear compact roller guide version Size 55 Transfer elements: Accuracy Ball Screws Diameter x Slope Diameter 50 x 20 mm Feed drive system: Three-phase servo motors Closed design Feed forces: X-axis at ED S3-40% 15000 N Y-axis at ED S3-40% 15000 N Z-axis at ED S3-40% 20000 N Positio ...

x-travel: 650 mmy-travel: 600 mmz-travel: 500 mmcontrol: Sinumerik 840 D pl SiemensMain spindle:: turning speed range - main spindle: 20 - 28.000 min/-1power capacity - main spindel: 23 / 18 kWmax. Torque: 79 Nmtool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mmSwivel range: A: +30° / -115 °rotatable: C: 360 °max. table load: 500 kgmax. workpiece sizes: Ø 630 x 313 mmtable speed: A:25 / C:65 min/-1Tool-Presetter:: number of toolpositions: 117 pos.max. tool diameter: 90 (125) mmmax. tool length: 300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 m/minAccelaration: 10 m/s²feed power: 8,5 kNtotal power requirement: 43 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 8,5 x 5,5 x 3,0 mDocuments: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 pos. full splash guard ...

travel -x axis: 850 mmtravel -y axis: 700 mmtravel -z axis: 500 mmcontrol: Heidenhain TNC 530 turning speeds: 10.000 U/minnumbers of positions in the tool changer: 195 tool taper: HSK-A 63 5-axis simultaneous machining center | HERMLE - C 40 UPequipped with ITC (80 bar) & tool changer and Pallet changer.Additional equipment:- Swivel axis and rotary table- 2 compartment plate changer (PW 800)- incl. 2x pallets 630 x 630 (diameter 800 mm)- tool breakage control by laserThe machine is in a well-maintained condition.For additional equipment information please referto the original order confirmation which is includedin the offer of this machine.A machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: C 40 | C40 | C-40 | C40UThe data for this ad was created with ModulMWS - the software solution of  ...

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmcontrol: TNC 430 HeidenhainMain spindle:: turning speed range - main spindle: max. 10.000 min/-1power capacity - main spindel: 7 / 9 kWtool taper: ISO 40 spindle bearing diameter: 70 mmmeasuring system: direct Resolution: 0,001 mmswiveling-rotary-table:: table surface area: Ø 280 mmmax. table load: 250 kgSwivel range: +/- 110 °rotatable: 360 °Tool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 (125) mmchange-time chip to chip: 5,5 secfeeds:: rapid traverse ( X / Y / Z ): 35 / 35 / 35 m/minfeed speeds: 1 - 30.000 mm/minFeed force: 6 kNtotal power requirement: 30 kVAweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,5 x 3,5 x 2,8 mDocuments: chip tray: Coolantsystem: hydraulic system: test probe: TS 632 elektr. hand wheel: Automatic Tool Changer: 30 pos. full splash guard: 5 Axis CNC - Machining ...

Key data: 800 mm, 600 mm, 500 mm

Manufacturer: HERMLE Type C 800 U Year of construction 2001 Control Siemens 810D Machine weight approx. 9,000 kg Tool holder SK40 x-travel 800 mm y-travel 600 mm z-travel 500 mm Speed range 16,000 min-1 Table size D280 Number of tools in the magazine 80 Inner coolant supply yes

x-travel: 875 mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain TNC410 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5552 Type: BMC 24 SSM Producer: HURCO Created: 2004 Parameters: Control system: ULTIMAX Work table length: 760 mm Work table width: 400 mm Spindle drive power: 7.5 kW Tool magazine: 24 pieces Speed: 80-8000 1/min Travel X-axis: 610 mm Travel Y-axis: 405 mm Travel Z-axis: 505 mm Cone: SK40 Machine height: 2650 mm Machine length: 2140 mm Machine width: 2100 mm Machine weight: 4200 kg

Key data: 1016 mm, 508 mm, 610 mm

Hurco BMC 4020 with Ultimax 4 controller, built in 2000 Machine runs well and is immediately ready for use. Travels: x-y-z. 1016mm x 508mm x -610mm Speed 8000 1/min, magazine 24 places Tool changer has been repaired and runs very well. Keyboard and trackball and touch screen new. Preparation for Lehmann rotary axis installed. (servo pack and wiring in the control cabinet) Sale free loaded onto truck Visit by appointment with us in 83558 Maitenbeth.

x-travel: 760 mmy-travel: 460 mmz-travel: 610 mmcontrol: Hurco Ultimax total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 660 mmy-travel: 355 mmz-travel: 455 mmFeed speed: 24 m/min.table load: 350 kgspindle turning speed - stepless: 10000 U/minpower capacity at 100 % load: 11 kWspindle taper: SK 40 distance table - lower edge spindle: mmtool change unit: 20-fach Control: Hurco Ultimax total power requirement: 13 kVAvertical Machining Center equipped with:- CNC Control Hurco UltiMax- Chip - ATC 20-fach- Tool Package- 3 Vices- CE SignAlmost exclusively aluminum, brass or plastic parts were manufacturedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 610 mm, 508 mm, 610 mm

Manufacturer: HURCO Type VMX 24 Year of construction 2002 Control UltiMax 4 Machine weight approx. 5 t Tool holder SK 40 x-travel 610 mm y-travel 508 mm z-travel 610 mm Speed range 10000 1/min max. table load 1 t Space requirement approx. 2.2 x 2.4 x 2.5 m

x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmControl: WinMax table-size: 760 x 510 mmspindle taper:: SK 40 spindle turning speed range: 12000 U/minrapid traverse: 38 m/mintotal power requirement: 18 kVAequipped with:- CNC control WINMax (V10) with simulation graphics & handwheel- tool changer 30-fold- chip conveyor- Renishaw probe- coolant system- spindle cooler- tool package- 3 vises- CE markAlmost exclusively aluminum, brass or plastic parts were manufactured7281h Power-On and 2272h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 762 mmy-travel: 508 mmz-travel: 610 mmcontrol: Ultimax total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mmy-travel: 510 mmz-travel: 610 mmControl: Hurco UltiMax spindle turning speed range: 10000 U/mintool taper: SK 40 table-size: 1020 x 510 mmtotal power requirement: 25 kVA- CNC Control UltiMax- Coolant- El. Handwheel- Tool Package- 3 Vices- CE SignAlmost exclusively aluminum, brass or plastic parts were manufacturedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mmy-travel: 660 mmz-travel: 610 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- 2015 retrofitted- ULTIMAX control- toolchanger for 24 tools- coolant through spindle 20 bar- chip conveyor- electronical hand wheelTechnische Daten / technical details:Verfahrweg X / X-Travel 1270 mmVerfahrweg Y / Y-Travel 660 mmVerfahrweg Z / Z-Travel 610 mmTischgröße / table size 1500x660 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 fachGewicht der Maschine ca. / weight 9000 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

x-travel: 1524 mmy-travel: 660 mmz-travel: 610 mmControl: Winmax table load: 1350 kgturning speeds: 12000 U/mintool change unit: 30-fach tool taper: SK 40 Drive: 18 kWtable-size: 1676 x 762 mmtotal power requirement: 30 KVAequipped with:- CNC control WINMax (Mill) with simulation graphics & handwheel- tool changer- spindle oil cooler- chip conveyor- tool package- 5 vises- CE mark13.464h machine hoursAlmost exclusively aluminum, brass or plastic parts were producedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 650 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Heidenhain TNC 415With 4. Axis (NC-dividing head)24-fold tool changercoolant deviceTechnische Daten / technical details:X-Weg / X-travel 600 mmY-Weg / Y-travel 400 mmZ-Weg / Z-travel 650 mmSpindelaufnahme / spindle taper SK40 Tischaufspannfläche / table clamping area 800x400 mmWerkzeugwechselmagazinplätze / number of tools in changer 24 Gewicht ca. / weight 4100 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mmy-travel: 1500 mmz-travel: 3500 mmcontrol: Siemens 840 D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine was producing parts of airplane Motors for Rolls Royce.Machine very little used and as new.Machine with2 pallet tables, diamter 1500 mm2 x ATC 40 tool changerAutomatic milling head 1ºx1º indexing, 37 kWMax. spindle speed 5000 rpmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer KEKEISEN Type UBF-D 7000 / 23 Year of construction 2013 Control iTNC 530 Heidenhain - 2 pallets, can be used individually or coupled. - Universal milling head automatically swivelling A: +/-90° / B: +/-90° - 6 axes - incl. NC rotary table 1,250 x 1,250 mm (fibro) - Operating hours: approx. 17,800 h - Current on / approx. 5,700 h program run x-travel 7,000 mm y-travel 1,200 mm z-travel 2,300 mm Speed range - main spindle 20 - 6,000 min/-1 Drive power - main spindle 30 kW Gear stages 2 Transmission stage 1 20 - 1.250 min/-1 Gearbox stage 2 1,250 - 6,000 min/-1 Tool holder SK 50 Swivel A+B: +/-90° Division 1 ° Workbench: Table clamping surface 7,000 x 840 mm Pallet 1: 2,500 x 840 mm Pallet 2: 3,300 x 840 mm table load 7,000 kg Number of T-slots 9 Tool magazine: Number of tool positions 60 ...

: 2500 mm: 1400 mm: 1400 mm: 1600x1400 mm: SK 50 : 4.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 460 mmy-travel: 265 mmz-travel: 305 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc 18i TBpallet changing devicewith 4th axis Nikken CNC 100 YA16-fold automatic tool changerchip conveyorcoolant deviceTechnische Daten / technical details:Verfahrweg X / X-Travel 460 mmVerfahrweg Y / Y-Travel 265 mmVerfahrweg Z / Z-Travel 305 mmPalettengröße / pallet size 470x310 mmWerkzeugschaft / spindle taper BT30 Drehzahl / spindle speed 0-15000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 16 fach / foldGewicht der Maschine ca. / weight 4000 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTe ...

x-travel: 1000 mmy-travel: 600 mmz-travel: 500 mmcontrol: Heidenhain 426milling-head swivable +/-: NC round table: NC Tool changer: : spindle taper ISO: 40 Tool changer: 40 table diameter: 900 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 600 mm, 700 mm

Inv. Num. : 7254 Type: MCV 1000 Producer: Kovosvit Created: 2002 Parameters: Control system: Heidenhain 426 Duty cycle: 85206 h Hours: 82523 h Work table length: 1300 mm Work table width: 600 mm Maximum spindle speed: 10000 1/min Number of axles: 3 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 700 mm Number of stacking positions: 20 pieces Machine weight: 5500 kg Overhaul of spindle and motor in 8/2023

x-travel: 800 mmy-travel: 630 mmz-travel: 710 mmControl: Siemens type: 840Dsl Number of spindles: 2 St.turning speeds: 30-12000 U/mintool taper: HSK 63 Tool changer: 80 Pos.Feed: 1-40.000 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDoppelwendespannerMaschinennummer 0552.80.00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mmy-travel: 700 mmz-travel: 700 mmControl: Siemens type: 840Dsl Number of spindles: 2 St.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDoppelwendespannerMaschinennummer 0552.80.00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1500 mmy-travel: 1500 mmz-travel: 800 mmspindle taper ISO: HSK 63A spindle turning speed range: 18000 U/minspindle motor: 23 kWb-axis: +/- 110 °c-axis: +/- 220 °control: Heidenhain iTNC 530 workpiece weight: 5000 kgno. of tools in the magazine: 40 StückTable dimensions: 1480 x 1440 mmtotal power requirement: 78 kVAweight of the machine ca.: 15 tdimensions of the machine ca.: 5 x 3,5 x 4,1 m5-axis machining centerequipped with:- CNC control Heidenhain iTNC 530 with HR 420- movable table- Blum laser tool measurement- chip conveyor- tool changer 40-fold (HSK 63A)- IKZ 40bar- filter system55000h Machine On, 20760h Program-Run, 23900h SpindleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 , 630 , 710

- X: 630 mm - Y: 630 mm - Z: 710 mm - speed range: 12.000 rpm - tool changer: 40 -station - B axis: Ø 525 mm - 360 ° - coolant system: yes - chip conveyor: no - tool holder: HSK 63 - control: MTX (Bosch Rexroth) - total power: 30 kW - weight of machine: 11.000 kg - space requirement (W x D x H): 7,0 x 2,0 x 3,2 m - condition: very good Details High-speed machining center with horizontal main spindle, direct measuring systems in all axes, feed speeds X / Y / Z: 60 m / min., B: 60 1 / min, max.forces (X / Y / Z): 17.5 / 20 / 17.5 kN, main spindle (Weiss GmbH), hardly any operating hours, was only used for research purposes at a technical university