Granülasyon değirmenleri

AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm

Including bottling line Rotor diameter: 320 mm Rotor width: 440 mm Drive motor 11 kW Weight approx. 800 kg

Make CONDUX Type CS 450/600-2 Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Rotor Ø: 340 mm Working width: 410mm Motor power: 11-18.5 kW Rotor cutting strips: 5 Stator cutting strips: 2 Insertion opening: approx. 410 x 340 mm Capacity depending on plastic and screen size: approx. 130-400 kg/h Granulate conveyor: 1.1 kW Net weight: approx. 1640 kg Gross weight: approx. 1865 kg Box dimensions: approx. 2.2 x 1.7 x 1.6 m Feed belts with silencer Centre distance: 3700 mm Belt width: 400mm Net weight: approx. 296 kg Gross weight: approx. 430 kg Box dimensions: approx. 0.8 x 0.8 x 4.4 m - Overhaul in 2022 - Real bevel cut - Integrated sound insulation - Conveniently designed grinding room - Safe material acceptance - Optimum granulate quality - Built-in granulate conveyor system - Easy maintenance and cleaning - Tested occupational safety Ø of rotor: 340 mm Useful width: 410mm Motor output: 11-18,5 kW Rotor blades: 5 Stator blades: ...

GUANGZHOU PC2660S plastic mill was manufactured by Chinese granulator manufacturer Guangzhou 3E Machinery Co. in 2018. The structure of the cascade knife granulator is made of high quality steel, ensuring rigidity, high efficiency and long service life of the machine. The machine is equipped with a rotor (cutting knife arrangement) with a cascade layout, consisting of 3 rows of 6 knives each. The rotor is 600mm long, 600mm wide and has a diameter of 260mm. The moving knives operate at a speed of 607 rpm. The drive system has a massive drive wheel, and the drive is transmitted via V-belts to the rotor pulley. The total weight of the machine is 1060 kg. Technical parameters of granulator GUANGZHOU PC2660S - layout of cutting knives: cascade - number of rotor knives: 3 rows x 6 pcs. - number of stationary knives: 2 rows x 2 pcs. - rotor length: 600 mm - rotor width: 600 mm - rot ...

This Herbold grinding mill is in machine storage at Plastima Used Machinery. The machine is in good condition for its age and has been disconnected in working state. The machine is from 1986. – Brand : Herbold – Model: SMS 45/30-F9-3 – Year built: 1986 – Working hours : Unknown

Brand: Mateu I Solé, model: B-10, cutting chamber: 450x280 mm, stepped rotor, motor: 7.5 KW (10 hp). With electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

PONAR ŻYWIEC SG-180FE-2B plastic mill built in 2011, is designed for crushing of plastic waste. Made of high quality steel, the plastic mill with dust exhaust ensures high rigidity of construction, high efficiency and long service life. The main advantages of the device are its comfortable operation and low noise level during machine’s work. SG 180FE 2B granulator is equipped with 9 rotary knives and 2 fixed knives with a length of 180 mm, capable of milling up to 30 kg of plastic elements per hour. The machine is offered with dust extraction. Total weight of the machine is 120 kg. Technical data of granulator PONAR ŻYWIEC SG-180FE-2B - length of blades: 180 mm - number of rotary blades: 9 - number of fixed blades: 2 - capacity: 30 kg/h - maximum rotation speed: 940 rpm - throat depth: 200 x 220 mm - dust extraction - motor power: 1,5 kW - power supply: 380 V; 50 Hz - ...

Granulator RAPID 15-14 Stock No.: 503328 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503329 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1997 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503330 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503332 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503333 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator RAPID 15-14 Stock No.: 503372 Machine/ Equipment Type: Granulator Manufacturer: RAPID Type: 15-14 Year of construction: 1996 Drive power: 2.2 kW Inlet cross-section: 170mm x 145mm Rotor blades: 6 pieces Screen hole diameter: 5 mm Stator blades: 2 pieces

Granulator Manufacturer: Rapid Type: 1514 Year of construction: 2000 - Device tested, cleaned and ready for use -

Propulsion: 22 kW With control cabinet and sound insulation

Ripper 2 axes of rotating shears. Brand: Sant Andrea, cutting chamber: 450x400 mm, motor: 7,5 hp.

ZERMA GSE 700 plastic granulator machine manufactured in 2018, is used in the processing of lightweight plastics such as PE, PP or PVC. The granulator has a specially shaped hopper with splash protection, inside of which there are fixed knives and a rotor with knives arranged in a ‘V’ shape. The rotor is driven by a slide-rail-mounted electric motor with tension-screw adjustable V-belts. The ZERMA GSE 700 plastic granulator machine can even cope with larger pieces of plastic, such as lumps and film rolls, thanks to the use of a deflecting wedge and block knives to prevent the rotor from blocking. All of the machine’s components are mounted on a base frame, fitted with mounting pads to dampen noise and vibration.