Üretici:
(kategori: 101)
bore capacity in steel (diameter): 45 mmquill stroke: 125 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmspindle turning speed range: 75 - 3200 U/minmax. milling cutter diameter: 80 mmspindle taper: ISO 30 max. distance between table and spindle-nose: 460 mmthroat: 230 mmconnected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 580 Kgdimensions of the machine ca.: 1,2 x 1,0 x 2,1 mEquipment:All axes with 3-digital display.Quill travel has separate digit display.Automatic feed in X-axis and quill.Motorized Z-axis.tapping device.coolant system.machine base.Collet set, SK tool holder.Further machine accessories in box.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vboring feeds:: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3000 mmy-travel: 2000 mmz-travel: 1600 mmspindle diameter: 150 mmspindle taper ISO: 50 spindle stroke: 700 mmspindle turning speed - stepless: 5 - 2500 U/minrapid traverse: 10000 mm/mintable surface area: 1600 x 2000 mmworkpiece weight: ca. 20 tspindle drive motor: 50 kWfeeds x/y/z -stepless: 1 - 9999 mm/mintable positioning: 360.000 °total power requirement: ca. 70 kWweight of the machine ca.: 40 tdimensions of the machine ca.: 6,0 x 8,0 x 4,5 mHorizontal drilling and milling machine / machining centre in cross-table designwith:2005 new 5-axis CNC control Dr. Heidenhain TNC 430 - electronic handwheel HR410 for all axes with V24 interface, punched tape reader, new electrics,new hydraulics, new servo motors, measuring probe for workpiece measurement- 60-position chain tool changer model WM III k02- B-axis (table rotary adjustment) 360,000 °- IKZ - internal spindle cooling, 20 ...
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2000 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 spindle turning speed range: 3000 U/minfeed range: 4 - 3000 mm/mintable load: 12 tspindle taper ISO: 50 spindle motor: 37 kWrapid traverse: 10 m/minControl: Heidenhain iTNC 530 b-axis: 360 °total power requirement: ca 70 kWweight: 36 trange L-W-H: 8 x 8 x 3,5 mequipped with:- CNC control Heidenhein iTNC 530 & handwheel- clamping table 1800 x 2200mm, 12t-- full B-axis with 360,000 positions- coolant- IKZ 20bar & extern cooling- BLUM TC 60 Taster- without chip conveyorca 11500 Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 150 mmx-travel: 14300 mmy-travel: 4100 mm: 1000 mm: 2500 mm: 900 mm: ISO 50 : 5,5 - 1000 U/min: 55 kW: 4000 x 3500 mm: 60 tcontrol: Fagor 8055 total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- Fagor 8055 CNC control- CNC rotary table (hydrostatic) 4000 x 3500 mm, 60 t- Coolant system (external)- Telescopic covers for the guideways- Operator platform attached to the spindle box- Plate field 2x 6000 x 2000 mm eachThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 250 mmx-travel: 12000 mmy-travel: 5850 mmz-travel: 1600 mmw-axis: 2000 mmControl: Siemens type: 840 D Powerlineturning speeds: 875 U/mindimension of the ram: 540x560 mmcoolant: 1800 lchip conveyor: total power requirement: kWweight of the machine ca.: 130 tOverhaul of the machine 2010Spindle mount SK 60/50 with adapterTraversing speed: Axis X/Y: 9,000 mm/min.Travel speed: Z/W axis 4,000 mm / min.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours ...
x-travel: 2.000 mmy-travel: 1.000 mmz-travel: 1.200 mmcontrol: TNC 430 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1transmission ratio: 2 power capacity - main spindel: 30 (100%) / 45 (40%) kWTorque: 1.050 / 1.580 Nmtool taper: HSK 100 swivellable: B: +/- 180 °indexing: B: 0,001 °work table:: table surface area: 1.000 x 2.000 mmmax. table load: 4.000 kgflute distance: 100 mmT-slots: 18 H7 number of T-slots: 10 tool magazin:: number of toolpositions: 40 pos.tool taper: HSK 100 tool changing time: 10 secmax. tool diameter: 250 mmmax. tool length: 400 mmmax. tool weight: 20 kgfeeds:: feed speeds: X,Y,Z: 0 - 20.000 mm/minfeed speeds: B: 10 1/minoutput: X,Z: 15,7 / Y: 8,5 kWoutput: B: 2,5 kWfeed power: 22500 Ntotal power requirement: kWweight of the machine ca.: 23 tdimensions of the machine ca.: 8,0 x 8,0 x 3,3 mChip conveyor: Coolantsystem: high pre ...
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmControl: TNC 426M HeidenhainMain spindle:: turning speed range - main spindle: 20 - 9.000 min/-1power capacity - main spindel: 9 / 13 kWmax. Torque: 57 / 82 Nmtool taper: ISO 40 DIN 69871swiveling-rotary-table:: table diameter: 700 x 500 mmswivellable: B: 105° (-10°/+95°) man.rotatable: 360° man.max. table load: 200 kgnumber of T-slots: 7 T-slot - distance: 63 mmT-slot - width: 14H7 mmcenter hole: 30H7 mmTool-Presetter:: number of toolpositions: 16 pos.tool taper: ISO 40 DIN 69871max. tool length: 290 mmmax. tool weight: 6,0 kgmax. total weight: 50 kgfeeds:: feed speeds: max. 10.000 mm/minrapid traverse: 12 m/mininput unit: 0,01 mmtotal power requirement: 17 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 4,0 x 4,0 x 2,5 mDocuments: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swivel-Rotary-Table: Automat ...
x-travel: 650 mmy-travel: 600 mmz-travel: 500 mmcontrol: Sinumerik 840 D pl SiemensMain spindle:: turning speed range - main spindle: 20 - 28.000 min/-1power capacity - main spindel: 23 / 18 kWmax. Torque: 79 Nmtool taper: HSK-A63 NC-Tilting round table:: table surface area: Ø 630 mmSwivel range: A: +30° / -115 °rotatable: C: 360 °max. table load: 500 kgmax. workpiece sizes: Ø 630 x 313 mmtable speed: A:25 / C:65 min/-1Tool-Presetter:: number of toolpositions: 117 pos.max. tool diameter: 90 (125) mmmax. tool length: 300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 m/minAccelaration: 10 m/s²feed power: 8,5 kNtotal power requirement: 43 kVAweight of the machine ca.: 10,5 tdimensions of the machine ca.: 8,5 x 5,5 x 3,0 mDocuments: high pressure coolant: Coolantsystem: through spindle coolant: 80 bar / 1.300l elektr. hand wheel: Automatic Tool Changer: 117 pos. full splash guard ...
x-travel: 550 mmy-travel: 305 mmz-travel: 460 mmControl: Sinumerik 808D adv. SiemensMain spindle:: turning speed range - main spindle: 10 - 10.000 min/-1power capacity - main spindel: 11 / 7,5 kWmax. Torque: 70 / 48 Nmtool taper: BT 40 work table:: table surface area: 800 x 320 mmmax. table load: 300 kgT-slots: 3x 14 x 100 mmdistance spindle /table: 100 - 600 mmTool-Presetter:: number of toolpositions: 12 pos.tool taper: BT 40 max. tool diameter: 70 mmmax. tool weight: 6,0 kgchange-time tool to tool: 7,0 secfeeds:: rapid traverse ( X / Y / Z ): 10 m/minfeed speeds: max. 10.000 mm/minrepeating accuracy: +/- 0,008 mmpositioning accuracy: +/- 0,01 mmtotal power requirement: 15 kVAweight of the machine ca.: 2,9 tdimensions of the machine ca.: 3,5 x 2,5 x 2,4 mDocuments: swarf management system: Coolantsystem: Automatic Tool Changer: test probe: RENISHAW - Primo CNC-MachiningCenter Ve ...
spindle diameter: 200 mmProcessing width on table: 6000 mmProcessing height on table: 3150 mmProcessing depth: 1985 mmSlide cross-section: 530 x 550 mmtable load: 20 tPlate field size: 16800 x 5500 mmtool taper: SK 60 total power requirement: kWweight of the machine ca.: 173 tdimensions of the machine ca.: m- Additional equipment Angle head large and small- The OB no. is: 22979- The table is the model S20 MP table Size: 2200 x 2500 mm- The processing width on the machine X -Way is 6000 mm- Including 6 plates 5600 mm x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-axis: 1350 mmy-axis: 1150 mmz-axis: 895 mmcontrol: HEIDENHAIN iTNC 530 turning speeds: 15000 U/mintool taper: HSK-A63 surface area: 1100 x 1000 mmmax. table load: 1600 kgnumbers of tools in magazin: 92 spindle drive: 30 / 38 kWA-Axis: -16 / +120 °total power requirement: 58 kWweight of the machine ca.: 12,6 tdimensions of the machine ca.: 5100 x 2300 x 3090 m2023 new Spindlemachine equipped with:- CNC Control Heidenhain TNC 530- swivel head, direct drive ‘High Torque’ motor- Autom. Tool change: 46-position tool magazine- High pressure cooling through spindle– Chip evacuator– Tool control with duallaser– Radio frequency probe– Airthrough spindle– APS(Advanced Process System) & ITC(Intelligent Thermal Control)- Renishaw probeMachine on: 6680h, active drives: 4876h, spindle: 2657hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1660 mmy-travel: 760 mmz-travel: 660 mmcontrol: Mazatrol M Plus table surface area: 2000 x 760 mmtable load: 1,0 trapid traverse: 24 m/minturning speed range: 7000 U/minpower capacity - milling spindle: 11 kWtool taper: SK 40 | |no. of tools in the magazine: 2 x 24 Stückweight of the machine ca.: 8,1 tdimensions: 4,2 x 3,2 x 2,8 mVertical Machining Center traveling coloumn- internal coolant- chipconveyor- ext, hand wheelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 530 mmz-travel: 510 mmControl: M 730 BM MAPPS IVMain spindle:: max. spindle speed: 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 transmission ratio: 1 spindle diameter in front bearing: 80 mmwork table:: table surface area: 900 x 600 mmmax. table load: 800 kgT-slots: 6x 18 x 100 mmdistance spindle /table: 150 - 660 mmTool-Presetter:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 150 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: ca. 1,3 secchange-time chip to chip: ca. 3,45 secfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 30.000 mm/minTipp feed: 0 - 5.000 : 20 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 6,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mDocuments: Chip conveyor: work light: Automatic T ...
çelikte delik kapasitesi (çap): 28 mmboğaz: 200 mmdelik stroku: 105 mmtabla yüzey alanı: 360x340 mmMil/tabla mesafesi maks.: 540 mmdönüş hızı aralığı - kademesiz: 120-3000 U/daktoplam güç gereksinimi: kWMakinenin ağırlığı yaklaşık: tmakinenin boyutları yaklaşık: mBu ilanın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...
x-travel: 1800 mmy-travel: 520 mmz-travel: 520 mmcontrol: iTNC 426-M spindle speed:: 8000 UpMrapid travel x/y/z: 30 m/mintool taper: SK 40 table load: 3 ttool piece magazine with: 30 Plätze spindle drive: 22 kWmax. torque on the spindle: 220 Nmweight of the machine ca.: tdimensions of the machine ca.: mMachine still in the delivery factory: Electric 400 Volt: Chip conveyor: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmdistance spindle nose and table: 120 - 630 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 130 / 87 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/mintotal power requirement: 23 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mChip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probing: XYZ Operation mode ...
x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871work table:: table surface area: 1.200 x 560 mmmax. table load: 1.000 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange time: 1,6 secchange-time chip to chip: 7,0 secfeeds:: feed speeds: 20.000 mm/minrapid traverse: 30 m/minFeed force: 5 kNtotal power requirement: 20 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,0 x 3,0 x 2,8 mChip conveyor: Automatic Tool Changer: 30 pos. Coolantsystem: DXF import function: elektr. hand wheel: Operation mode 4: direct travel-measuring-system: XYZ Coolant-Air-Blast- ...
spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1600 mmw-axis: 800 mmb-axis: 360 °table:: 1800 x 2200 table load: 25 tfeed range: 10000 mm/minspindle turning speed range: 10 - 3000 U/minspindle taper ISO: 50 spindle motor: 37/46 kWrapid traverse: 10 m/minControl: Heidenhain TNC 640 total power requirement: 70 kWweight: 38 trange L-W-H: 8,5 x 8,6 x 5,5 mmEquipped with:- Heidenhein iTNC 640 CNC control & HR 510 handwheel- HUI 50 automatic milling head- 40-position tool changer (ISO 50)- B-axis in rotary table- Heidenhain optical scales- NC rotary table- Coolant system with paper belt filter, Coolant through Spindle 20bar- Chip conveyor- Heidenhain TS 460 measuring probe- Movable operating platform- Pfannenberg oil cooler- Central lubricationca 4450h Spindle HoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Çelikte delik kapasitesi (çap): mmarm uzunluğu: mmiş parçası yüksekliği maks.: mmtoplam güç gereksinimi: kW makine ağırlığı ca.: tmakine boyutları ca.: mBu ilanın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
Üretici: Elumatec Ürün Kodu: SBZ 122/31 Üretim Yılı: 2007 Makine Tipi : Çubuk İşleme Merkezi İşleme Uzunluğu: Çubuk destekli 3750 mm / 3500 mm desteksiz Eksen Hareketi: X = 350 mm, Y = 280 mm, Z = 300 mm Hız: 30 m/dak konumlandırma hızı (tüm eksenler) Doğruluk: ±0,1 mm Mil: 6 kW, 21.000 rpm, HSK F63 Takım İstasyonları: 5 Takım Çapı: 200 mm (manuel), 92 mm (otomatik) Testere Bıçağı Çapı: 500 mm Hava Tüketimi: Döngü başına ~50 l Basınçlı Hava Gereksinimi: >7 bar Güç Kaynağı: 400 V, 3 fazlı Daha fazlasını burada bulabilirsiniz - / Bize şu adresten ulaşın: -
x-travel: 600 mmy-travel: 450 mmz-travel: 300 mmCNC-control: Roeders RMS6 table-size: 700 x 550 mmmax. table load: 800 kgspindle taper ISO: spindle turning speed range: 42.000 U/minfeed stepless: 0 - 30.000 mm/minrapid traverse: 30 m/mindrive capacity - spindle motor: 14 kWtool change unit: Pick-up 18 Pos.voltage: 400 Vtotal power requirement: 20 kVAweight of the machine ca.: 5,2 tdimensions of the machine ca.: 3,00 x 2,30 x 2,70 m- Serial No.: 88231-83- HSC spindle Fischer MFW1230/42- Dust extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Üretici: LINEMATIC Ürün Kodu: LM34/705 Üretim Yılı: 2004 Güç: 14 kW Gerilim: 400 V, 20 A, 50 Hz Faz: 3 fazlı + Nötr + Koruyucu Topraklama CE sertifikalı Daha fazlasını burada bulabilirsiniz - / Bize şu adresten ulaşın: -
Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Çelikte delik kapasitesi (çap): 40 mmBoğaz: 380 mmDelik stroku: 160 mm: 4 hız: 60 - 1250 U/basılabilir boyut: - mmToplam güç gereksinimi: 3,3 kWağırlık: 900 kgboyutlar: - mmÖzellikler:-Sağlam tasarıma sahip dişli delme makinesi-Kolona monte delme masası-Sağa/sola dönüş-Besleme-Soğutma sistemiBu ilanın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.
