Cnc delik işleme değirmenleri

Technical features: X axis travel: 3.000mm Y axis travel: 2.250mm W axis travel: 2.500mm Z axis travel: 700mm B axis table rotation in continuos B axis positioning 0,001° Table dimensions 1.400X1.600mm Table max loading 8 ton head dimensions 410X505mm spindle diameter 130mm Spindle taper ISO 50 Spindle speed 4-3.000rpm table with pallet top (automatic clamping) 1.800X1.800mm

Producer Fermat Year manufacture 2012 Control system Heidenhain TNC 620 Diameter of working spindle 100 mm Travel X-axis 2000 mm Travel Y-axis 2000 mm Spindle speed 10 - 3000 /min. Cooling through spindle 20 bar Spindle travel - W axis 730 mm Travel Z-axis 1250 mm Spindle taper ISO 50 Table dimensions 1250x1400 mm Max. load of table 3000 kg Machine weight 24050 kg Machine dimensions l x w x h 4370x3850x3600 mm Technical parameters Control system Heidenhain T

Control Heidenhain ... TNC 640 Spindle diameter ... 130mm Axis X ... 3500mm Axis Y ... 2500mm Spindle speed.. 10-3000/min. cooling ... 20bar Axis W ... 730mm Axis Z ... 1500mm SK 50 Table dimensions... 1800 x 2200mm Conveyor Workpiece touch probe TS 460 El. Handwheel HR 550 FS The machine is in good condition, possible to sample under electricity.

CNC travelling column drilling-milling machine manufacturer FPT model Pragma M40 with control Fidia C20 with plate field 5000 x 2000 mm. Travel xyz 4000x2000x1200 mm. 2 pieces of universal heads BT50 / HSK63 both automatically swivel 2.5°. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Mitsubishi MAF 240/180B CNC Floor Type HBM, New 1980 (Recontrolled in 1999) Condition: Very Good Type of CNC Control: Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter: 7.08"(180mm) Milling spindle diameter: 9.44"(240mm) Vertical Head Travel, Y-Axis: 169"(4300mm) Horizontal Column Travel, X-Axis: 1200" (30500mm) Headstock Travel, Z-1 Axis: 47.24"(1200mm) Spindle Travel, Z-2 Axis: 47.24" Total Axial Travel: 94.49"(2400mm) Rapid Traverse, X&Y Axes: 315 IPM Rapid traverse, Z, W and U Axes: 197 IPM Spindle Taper: CAT #50 Spindle Speeds: 6-1200 RPM - (3-Steps) Max. Spindle Thrust: 11,000 Lbs Constant Power Range: 79-1200 RPM Rotary Table Manufacture and Model: Mitsubishi DIT-A21X30 Rotary Table Size: 82" x 118" (2100x3000mm T-Slotted Rotary Table Max. Weight Capacity: 30 Tons Rotary Table Type: Insliding Rotary Inslide Travel: 59" (1500mm) Rotary T ...

PAMA 200 CNC Floor Type Horizontal Boring & Milling machine Built 1997 / 2013 X=16.000, Y=6.000, Z=1.330, W=830mm Spindle diam. 200mm ISO 50/60 Spindle RPM: 1-680 75HP CNC FANUC 31i-M Table 5.000x5.000mm, X travel 2.500mm max. loading 120 Ton Rotation 360.000° Floorplates 4.000 x 15.000mm Chip conveyor Angle head This machine disassembled end of 2021. It was in a very good condition.

CNC Floor Type Boring & Milling Machine   PAMA Speedram 1000   Manufactured new in 2008 - with only 4500 program run hours   Heidenhain iTNC 530 CNC Control   X 13000 mm   Y 3000 mm   Z 1000 mm   W 700 mm   Pama NC-Rotary travelling table   Table size 2000 x 2200 mm   Table load 16 t   B-Axis 360°/0.001° with contour milling capability   V-Axis table travel 2000 mm   Boring spindle diameter 150 mm   Spindle taper ISO 50   Spindle drive 37 KW   Spindle speeds to 3500 rpm   Floor plates   Huron type universal head   X,Y,Z hydrostatics   Optical scales X,Y,Z,V Axes   Linear magnetic scale W Axis   Coolant through the spindle 30 bar with filtration unit   Automatic attachment clamping on the ram   PREPARED for ATC   Excellent machine condition - Under power - Immediately available

Floor type Boring and Milling M/C PAMA Speedram SR 2000 Year 2012 Condition never installed and never used TECHNICAL DETAILS spindlediameter: 180mm x-travel: 18000mm y-travel: 5000mm table: 18000x3000mm Control: Siemens 840D spindle speed: 4 - 2.500 U/min spindle capacity: 60kW ADDITIONAL INFORMATION Equipment/ Accessories: - Hydrostaticguidefor all axes - Floorplates - Head changingstation including 8 heads plus 18tool positions - coolantsystemKnoll, Operating pressureoutside spindle 5 bar / inside tool 45 bar - chipconveyor - stroke axis X:18000 mm CONDITIONS - FOB - Packing Included  Not Included : - Trainning and Foundation; - The customer must provide the necessary equipment and structure to move the load to assemble the machine. - Machine does not have manufacturer warranty. - Any part or component that needs to be replaced must be purchased  ...

For sale: San Rocco CNC boring mill type MEC 100 with Siemens 810 control. Longitudinal and transverse movement is 1,200 x 2,000 mm, table size is 1,100 x 1,300 mm and is equipped with a full-fledged C-axis / spindle diameter is 100 mm with ISO-50 holder. The drilling spindle movement is 700 mm, the maximum spindle speed is from 2 to 1,000 rpm in 4 stages. The machine is in good condition and has an X, Y and Z axis and a full-fledged C axis and a W axis (drilling spindle 700 mm) You can move 2 axes simultaneously. You can mill around on the machine. Can still be visited under electricity, subject to prior sale.

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

Ref. -No.: 10361Manufacturer: SCHIESSYear of construction: 2023Type of control: CNCControl: Siemens, Heidenhain, Fanuc - Configurable as requiredStorage location: HalberstadtCountry of origin: Germanyfinancing: nach AnfrageSupport sleeve diameter: 130 mmX-Travel: 3000 mmY-Travel: 2000 mmZ-Travel: 1600 mmSpindle stroke: 800 mmB-Axis: 360 °W-Axis: 800 mmSpindle Taper: SK50 Max. Tool Weight: 25 kgClamping Area: 1250 x 1250 (or configurable as required) mmT - groove width: 22 mmT - slot spacing: 160 mmSwivelling: Configurable as required °Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPMMax. Torque: 2500 NmDrive Capacity - Spindle Motor: 41 kW

Technical data of used Schiess Froriep Boring Machine: CNC: Siemens 840 D Maximum transversal travel X axis: 13.770 mm Maximum vertical travel Y axis: 5.000 mm Z axis: 1.780 mm W axis: 950 mm V axis rotating support plane: 2.000 mm Rotating table dimensions: 5.000 x 3.500 mm Fixed table dimensions: 7.500 x 4.300 mm Maximum permissible load on the table: 120 ton Spindle power: 100 kW Spindle revolutions per minute: 710 rpm

spindle diameter: 160 mmx-travel: 10.000 mmy-travel: 3.000 mmControl: ICEM 402 total power requirement: kWweight of the machine ca.: 80 tdimensions of the machine ca.: mStocknumber 1210050Type of machine CNC Floortype Boring MachineMake SKODAType W 160 CNCBuild in 1974/retrofitted in 2002Type of control ICEM 402Spindle diameter 160 mmX-stroke (mm) 10.000Y-stroke (mm) 3.000Z-stroke (mm) 1600W-stroke 1250 mmSpeeds (Rpm) 1 - 1.200Feeds (mm/R) 0,5 - 8.000 mm/min.Rapid feeds 8.000 mm/minTotal Power (KW) 180 KvAWeight 80 tonThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mmx-travel: 15000 mmy-travel: 4000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1210060Type of machine Floortype Boring machineMake SKODAType W160HCBuild in 1990Spindle diameter 160 mmX-stroke (mm) 15.000Y-stroke (mm) 4.000Z-stroke (mm) 1.600W-stroke 1.250Tool Taper Iso 50 Additional informationWith 3 floorplates 1880x5615 mm en 3x 1880x6400 mm3 millingheads and 1 support1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SKODA W200GNR 1978 /CNC MEFI 836 y.m. 2005 ball screws y 4150mm x 8000mm millng heads floor plates 5600x1885x400 rotary table E20 load 20tons

CNC table drill TOS WHN 13 with quill Built in 1991 Control FAGOR 8055 Travel xyzw 3500/1850/1330/600 mm Table size 1800 x1800 mm. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

CNC Heidenhain TNC 426 with handwheel HR 410 X = 3500 mm Y = 2500 mm Z = 1250 mm W = 800 mm Table dimensions 1800 x 2200 mm Spindle diameter 130 mm Max. spindle speeds 2500 RPM External coolant 2-axis manual milling head TOS HUR 50 year 2004 almost unused.

Tos WHQ 13.8 CNC Heidenhaine TNC 430 Year 2001 X 3500 Y 2000 Z 1200 W800 Table size 1800x1730 Table load 10000 kg Cooling through the spindle – yes Chipconveyor - yes ATC 60 pockets Max spindle RPM - 2800 Tools BT-50

Control Heidenhain TNC 407 Year 1996 Workpiece weight 2200 kg X=1250mm Y=1125mm Z=950mm Machine can be checked under power

oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel  ...

Ref. -No.: 10022Manufacturer: UNIONYear of construction: 2001Type of control: CNCControl: Heidenhain-Steuerung TNC 310Storage location: HalberstadtCountry of origin: DeutschlandX-Travel: 2000 mmY-Travel: 1600 mmZ-Travel: 2000 mmMachine length: 6950 mmMachine width: 4685 mmMachine Height: 3885 mmTable Height: 1050 mmSpindle Diameter: 110 mmSpindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1400 x 1600 mmFaceplate speed: 5,6 - 224 RPMSpindle Speed: 5,6 - 1120 RPMMetric thread feeds: 1,25 - 56 mmDrive Capacity - Spindle Motor: 40 kWWeight Of The Machine Ca.: 25 tBore Depth: W 800 mmFurther information:with facing slide13 inch thread feeds 1 1/8 - 28 Gg / 1 “YOM: 1990/ Retrofit: 2001

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Built 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Spindle diam. 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Table 5.200x5.200mm, X travel 3.300mm max. loading 100 Ton Rotation 360.000° Floorplates 6.000 x 10.000mm Hydrostatic Many heads This machine was used in final cutting and boring, drilling of big vessel engine cylinder blocks in STX Engine. It can be done the straight and inclined direction drilling &boring. It means the spindle head can be tilted. It is very high accuracy machine. This machine is in assembled condition but not under power

1 x CNC table boring mill Wotan Rapid 1 Year of construction: overhauled / with new control system 2008 X- 2000mm Y-1600mm Z- 600mm W-1000mm B- 360 degrees Table clamping surface : 1250 x1600mm Table load: 6000 kg Spindle speed : 1600 rpm Control: Heidenhain it 530 Controlled axes 5

1 x CNC table boring mill Wotan Rapid 1 Year of manufacture: overhauled / with new control system 2012 X- 2000mm Y-1600mm Z- 600mm W-1000mm B- 360 degrees Table clamping surface : 1250 x1600mm Table load: 6000 kg Spindle speed : 1600 rpm Control: Heidenhain it 530 Controlled axes 5