delik işleme değirmenleri ve işleme merkezleri kullanılmış satılık (3,197)

Core drilling machine / diamond drill Brand: Daewoo Type: DADK-D230BE Peak power: 4580 watts Speed: 100-530 RPM (infinitely adjustable) Max. Drilling Diameter: 230 mm Max. Drilling Depth: 550 mm Drill connection: 1/2 inch internal, 5/4 inch external Equipped with: digital display Equipped with: connection for water cooling Equipped with: 30 milliamp residual current device (PRCD) Tripod: Adjustable aluminum tripod Condition: unused, in the original packaging Attention: diamond drill bit not included Auction-ID: A3-43497-412

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmCNC-control: SIEMENS table-size: 1000 x 560 mmmax. table load: 800 kgspindle taper: SK 40 spindle turning speed range: 20 - 8.000 U/minfeed stepless: 1 - 20.000 mm/minrapid traverse: 20 m/mindrive capacity - spindle motor: 13 / 9 kWtool change unit: 20 Poscoolant: voltage: 380 Vtotal power requirement: 35 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,50 x 3,50 x 2,70 m- Serial No.: 15415027604- machine as good as new- Machine ON: 2.599 h program ON: 1.027 h- tool measurement BLUM-MICRO incl. calibration tool- infrared probe HEIDENHAIN TS 640- Tool changer 20 pos. with double gripper- chip tray (no chip conveyor)- div. tool holder- coolant unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

mil sayısı: 25 -1500 U/d Çelikte Stufenlosbore kapasitesi (çap): 23 mm dialit strok: 120 mm masa sıkıştırma yüzeyi:: 1250 x 340 mm konik MK: MK3 toplam güç gereksinimi: makinenin 2 kW ağırlığı yaklaşık 0,4 tBu reklam için veri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Machine number: 0152Operating voltage: 400 VConnection: 3.8 kWControl: HEIDENHAINFeed force Y-axis: 6600 NFeed force X- and Z-axis: 9500 NRapid traverse speed: 30 m/minProgrammable feed: 30000 mm/minTool holder: SK 40Spindle diameter: 70 mmincl. 24-fold tool changer, max. tool diameter: 70 mmMax. tool length: 300 mmTravel X-axis: 2000 mmTravel Y-axis: 420 mmTravel Z-axis: 400 mmdistance from spindle nose to table: 200 - 600 mmMachine table width: 500 mmMachine table length: 2500 mm, incl. the tool holders located on the tool changer Auction-ID: A7-40841-1

Spindle speed: from 20 to 1800 rpmTable dimensions: 1600 x 1450 mmwith 9 grooves, travel X-axis: approx. 1500 mmTravel Y-axis: approx. 1300 mmTravel Z-axis: approx. 1200 mmThe machine is equipped with a 3-axis digital display from the manufacturer HEIDENHAIN, two clamping brackets, one dimension: 1850 x 850 mm and one 1250 x 800 mm, also various accessories Auction-ID: A7-40841-41

Including: Column drills from IM and OLIVETTI manufacturersSpeeds can be set in two positions; rpm: 230-1800 and 480-3500Estimated weight: 480 kg Approximate dimensions: 1200x800xh2000 mm Auction-ID: A7-44996-161

Tapping capacity: 30 mm, motor power: 1.1 kW, speed range 35-1980 rpm, table size: 340 x 340 mm, spindle/column distance: 280 mm.Serial: 16868Estimated weight: 290 kg Approximate dimensions: 900x600x1800 mm Auction-ID: A7-44996-163

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 4758.02 €: 18 mm: MK 2 : 240 mm: 30 - 3000 U/min: M12 : 355 mm: 705 mm: 1065 mm: 170 kg: 100 mm: 155 - 415 mm: 155 - 550 mm: 340 x 280 mm: 82 mmINCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026)- VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8)- FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43)- FLOTT tap holder B16 (list price €191.57)- Taper mandrel DIN 238 MK2/B16 (list price €26.18)- Taper mandrel DIN 238 MK2/B18 (list price €26.18)- Felix 2.0 - 100 mm (list price €428.36)YOU SAVE: 842,62 €Continuous/normal drilling performance 18/20 (in E335/ST60), 12 NmManual feedDigital speed and drilling depth displayThread cutting systemControl panel with OLED displayRob ...

: neu : ca. 4 Monate ab Auftragse : 1530 mm: 16 mm: 12 mm: 7 1/min: 3 °: 8 : 500 mm: 22.5 kW: 250 l: 950 mm: 2350 mm: 1400 mm: 2000 mm: 5200 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 51700 €: 977.13 €: 65 mm: MK 5 : 440 - 1.580 mm: 40 - 1.920 (12) U/min: Stahl/Guß: M50/M60 : 2850 mm: 1400 mm: 2940 mm: 4600 kg: 380 - 1.600 mm: 0,07 - 0,96 (6) mm/min: 5.5 kW: 432 mm: 370 mm: 2.480 x 1.050 x 210 mm: 1,5 kW: 700 x 500 x 400 mm: 3170 mm: 0,75 kWleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with hydraulic clampingelectric height adjustment of extension arm andhydraulic clampinghydraulicclamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 8970 €: 173.12 €: 30 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: 380 mm: 600 mm: 2060 mm: 260 kg: 100 mm: 170 - 660 mm: 1.216 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEHigh quality geardrive machine2 automatical feedLeft-right drillingAutomatic tool ejectorAdjustable depth stopTable with T-slotsDrill guard with micro switchLightening equipmentUser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 3984 : prompt, Zwischenverkauf v : Spanien : 10090 €: 193.73 €: 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: M24 : 665 mm: 640 mm: 2100 mm: 260 kg: Automatisch 0,10 - 0,20 - mm/U: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 665 x 400 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine3 aut. feedsleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMANIncl. following optional equipment:lighting equipmentcoolant equipment and machine base with T-slots(symbol photo)OPTION (PRICE ON REQUEST):reverse for tappingTime of delivery with options: approx. 8 weeksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmCNC-control: HEIDENHAIN TNC620 table-size: 1200 x 560 mmmax. table load: 1000 kgspindle taper: SK 40 spindle turning speed range: 10.000 U/mindrive capacity - spindle motor: 13 kWfeed stepless: 20.000 mm/minrapid traverse: 25 m/mintool change unit: 20 Pos.coolant: IKZ 20 bar voltage: 400 Vtotal power requirement: 17 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 2,55 x 2,30 x 2,25 mchip conveyor: 3,90 x 0,95 x 1,60 mcoolant tank: - Serial No.: 1539000377A- Machine ON: 21.689 h- Program Run: 9.021 h- CNC-Control: Heidenhain TNC620- elektronic hand wheel- chip conveyor- coolant through spindle 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

full boring: 150 mmbore depth: 13000 mmfull boring: 150 mmworkpiece weight: 80 tcontrol: Siemens type: S 7 workpiece dia.: 1250 mm0: 2000 mmborehole diameter: 450 mmtotal power requirement: kWweight of the machine ca.: 160 tdimensions of the machine ca.: mHeadstock adjustment 10,000mmHeadstock bed bed width 1600mm, guideway width 360Center height of headstock 1600 mmFace plate 1750 mmDrive 60 KWSpeed 2.62-200 rpmBed for drilling unitBed length 27,000 mmBed width 1320 mm Guideway width 290 mmheight of the bed 670 mmDrill motor 60 KWDrilling unit Sph 920 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If y ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 €: 132.01 €: 25 mm: MK 3 : 250 mm: 245 - 4000 U/min: 0,7 / 1,3 kW: M18 : 400 mm: 655 mm: 1900 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingtool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1400 mmy-travel: 1200 mmz-travel: 1325 mmcontrol: Mazatrol Smotth G numbers of pallets: 2 size of pallet: 800 x 800 mmmax. workpiece height: 1450 mmmax. workpiecediameter: 1450 mmturning speed range - milling: 10000 U/mintool taper: BT 50 Tool changer: 120 pos.power capacity - milling spindle: 37 kWb-axis (table): 360000 x 1 °rapid traverse: 60 m/minworkpiece weight: 2200 kgtotal power requirement: 102 kVAweight of the machine ca.: 31 tdimensions of the machine ca.: 3,88 x 8,05 mequipped with:- CNC Control MAZATROL Smooth G- ATC 120-fold (BT 50)- Chip Conveyor- HP Coolant with internal Spindle Cooling 70 BAR- 360000 ° positions indexing table- pallet changer with safety cover (2 Pallets)- Spindle cooling unit- Flood cooling- Niagara cooling / rinsing system- Blowout through the spindle- Coolant and chip protection through fully enclosed working space- Workspace door lock- wor ...

X-Seyahat: 650 mmy-Yolculuk: 650 mmz-Seyahat: 680 mm Çalışma saati sayısı: 55.000 salat konik: HSK 63 dönme mil: 85 mil dönüş hız aralığı: 20.000 U/minZincir tipi alet şarjörü: 60 pozisyonÇip konveyörüPalet değiştiriciSoğutma sıvısı filtrasyon sistemi, mil üzerinden yüksek basınçlı soğutma sıvısıBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

X-Seyahat: 1200 mmy-Yolculuk: 950 mmz-yolculuk: 1200 mmB-eksenli hareket: 0 – 360A-eksen hareketi: +45 ila -90Takım tutucu mil: HSK 100Tork mil: 200 mmMil hızı: 15.000 rpmZincir tipi alet şarjörü: 60 pozisyonPalet değiştiriciÇip konveyörüMil üzerinden yüksek basınçlı soğutma sıvısıSoğutma sıvısı filtrasyon sistemiBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Auction-ID: A1-44976-258

an old industrial column drilling machine / radial drilling machine, probably originating from Germany (ASDO Wetzlar) and imported/sold by Edouard Baeyens – Brussels, a well-known Belgian machine distributor from the past. This is a very heavy professional machine, used in metalworking workshops. WHAT EXACTLY IS THIS? ✔ Industrial pillar drilling machine (heavy duty) or ✔ Radial drilling machine (due to the large arm and movable drill head) These types of machines are used for: Drilling of large metal parts tapping (thread cutting) Culling Heavy workpieces that do not fit on small drills They are extremely strong and intended for continuous industrial use. INFO FROM THE PICTURES ON YOUR PHOTOS 1️⃣ Plate \"ASDO Wetzlar\" ASDO is a German manufacturer (Wetzlar). Very solid machines, especially in the 1950s–1980s. The serial number 26579 is on it. 2️⃣ Plate \ ...

Auction-ID: A1-44976-237

Item sold in NOT verified status. Auction-ID: A7-44984-1

Equipped with tool changing station for 24 pieces Auction-ID: A1-41989-6

: 40 mmthreading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mmspindle turning speed - stepless: 160 - 2250 U/minColumn diameter: 115 mmspindle stroke: 120 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117/701 mmfeed: 0,10 + 0,20 mm/UMotor output: 1,45 / 1,9 kWheight of the machine: ca. 1840 mmweight of the machine ca.: 285 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Excluding tools Auction-ID: A1-41989-114

: gebraucht : 3985 : prompt, Zwischenverkauf v : Schweden : 1800 €: 1 : 25 mm: MK 3 : 235 mm: 100 - 2080 (8) U/min: 750 mm: 900 mm: 1550 mm: 250 kgQuill travel by handwheelHeight adjustable and swiveling drilling headCross table with manual feed in X and Y axesDoes not comply with the German UVV and Austrian AMVOno operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lot: column drilling machine Heckert BK 50 AI incl. machine clamp and cooling, Heckert (VEB WMK \"Fritz Heckert\"), type: BK 50 AI, power supply: 380 V (3-phase), frequency: 50 Hz, power: approx. 6.8 kW, weight: approx. 1,680 kg, max. Drilling capacity: approx. 50 mm in steel, Speed range: approx. 45 – 1400 rpm (via gearbox), power supplies: approx. 0.11 – 1.73 mm/rev. (adjustable), gearbox with speed settings (A/B and I/II), manual and automatic feed, depth stop with scale, built-in coolant installation with flexible hose and shut-off valve, control switch for machine and cooling pump available, material and speed tables on the machine, including machine clamp (table mounted) Auction-ID: A1-41989-71

: gebraucht : 1992 : 090174 : März 2026, Zwischenverkau : Belgien : 17800 €: 1 : 3050 mm: 6 mm: 11 - 25 1/min: 0.5 - 3 °: 18 : 750 mm: 11 kW: 3850 mm: 1750 mm: 1720 mm: 4600 kg: 770 mmSC 5 control for:- Sheet thickness input- Automatic cutting angle and gap adjustment- Cutting length limitation- Programmable backgauge lengthMotorized backgauge 750 mmDownholder protection guardFoot pedalTable supports with ball bearings1 side fence 1000 mmOperating manual in GermanMachine does not comply with German accident prevention regulations (UVV) or Austrian AMVONEW BLADESThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 €: 241.34 €: 50 mm: MK 4 : 350 mm: 93 - 152 - 204 - 298 - 44 U/min: 3 kW: M35 : 480 mm: 755 mm: 2265 mm: 435 kg: 0,1 / 0,18 / 0,24 mm/U: 180 mm: 150 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEGear drive3 aut. feedssliding machine tablesolid drill headtiltable turntablefront wheel for sensitive fine feed(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipment Lcoolant equipment and machine base with T-slots ERBReverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 030161 : prompt, Zwischenverkauf v : Deutschland : 7350.17 €: 141.86 €: 1 : 23 mm: MK 2 : 260 mm: 20 - 2000 U/min: 1.5 kW: M16x1 : 430 mm: 715 mm: 1800 mm: 290 kg: manuell mm/U: 110 mm: 230 - 850 mm: 420 x 340 mm: 100 mmINCLUDES FREE SPRING PACKAGE (with purchase until March 31, 2026)- VÖLKEL Precision Package (List price €54.90) Contents: + MGB GREEN RING FORM B 1 x M4 (35330) 1 x M5 (35334) 1 x M6 (35338) 1 x M8 (35342) + LÖHER Core Drill Bits (M4, M5, M6, M8)- FLOTT quick-release drill chuck 3-16 mm B18 (list price €115.43)- FLOTT tap holder B16 (list price €191.57)- Taper mandrel DIN 238 MK2/B16 (list price €26.18)- Taper mandrel DIN 238 MK2/B18 (list price €26.18)- Felix 2.0 - 100 mm (list price €428.36)YOU SAVE: 842,62 €Drilling capacity / normal drilling capacity 23/25 (in E335/ST60)Manual feedMain switchGewindeschneideinrichtungControl panel wit ...