Autómatas de sierras de cinta

horno 650 interior 1x1x1.2m (posible tamaño varios) t máximo 650 Plc

cutting diameter: 250 mmsaw band length: 3505 x 32 x 0,95 mmcutting width: mmControl: total power requirement: 8 kVAweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1937 x 1850 x 1570 mmNC-controlled band saw machine for series cuts with differentlengths and quantities for all materials.Technical data:Cutting capacityCutting diameter 250 mmBelt speed 24 - 90 m/min. - steplessSaw band dimensions 3505 x 32 x 0.95 mmBelt drive 3.7 kWTable height 550 mmEquipment:Chip conveyorCoolant deviceRunwayOperation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mmsaw band length: 2455 mmtable height: 850 mmcutting width: 245 x 150 mmcutting speed: 45/90 m/mindimensions of saw-band: 2480 x 27 x 0,9 mm: 90 mm: 90 mm: 145 mmImpact energy: 145 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 0,2 tdimensions: 1,43 x 0,72 x 1,7 m- Miter cuts up to 60 ° left-Vise with quick release device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mmdimensions of saw-band: 2480 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sierra de cinta automática Bauer S260 Año de construcción: 1995 Fabricante: Bauer Alemania S/N 69-1120 con pista adicional Características técnicas Diámetro de corte 260 mm Longitud de la hoja de sierra 3660 x 25x 0.9 mm Ancho de corte 320 x 240 mm Motor 0,75 kW Rango de corte a 90° redondo 260 mm plano 450 x 240 mm Rango de corte a 45° redondo 230 mm plano 240 x 200 mm Hidr. subir + bajar el marco de la sierra Gobernanza convencional Presión de corte infinitamente variable 0 - 10 m/min Potencia total 400 V / 0,8 kW Dispositivo refrigerante Dimensiones: 2010 x 850 x 1110 mm Peso aprox. 800 kg

Diámetro de corte: 300 mmLongitud de la cinta de sierra: 4640x41x1,3 mmAncho de corte: 300 mmVelocidad de corte: 19-130 m/minPotencia total requerida: 7 kWPeso de la máquina aprox.: 2,5 tDimensiones de la máquina aprox.: 2,3x2,3x1,9 m

cutting diameter: 15 - 300 mmsaw band length: 4640 mmcutting width: 1,3 mmcutting range - square -: 300 x 300 mmfeed length: 600 mmfeed length: multiple: 5400 mmdimensions of saw-band: 4640 x 41 x 1,3 mmcutting speed: 19 - 130 m/minmin. cut-off length: 10 mmheight of material-table: 700 mmtotal power requirement: 7 kWweight of the machine ca.: 2,7 tdimensions of machine L x W x H: 2,35 x 2,34 x 1,95 mAccessories: chip conveyor, DRO for cutting length, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Características técnicas: Zona de aserrado Redondo de 90°: 300 mm Plano a 90°: 300 x 300 mm Velocidad de avance: 10 mm Alimentación múltiple: 6000 mm Velocidad máxima de aserrado: 0 - 115 1/min Dimensiones (ancho x fondo x alto), aprox.: 2580 x 2300 x 1850 mm Equipo: -Transportador - Dispositivo de refrigeración - Pulsador de parada de emergencia

Número de serie: 0392212 Diámetro de corte: Run máx. 430 mm Control: MIT Massenspeicher carrera máx.: 10 mmPeso de la máquina aprox.: 4 t

Diámetro de corte: 670 mmLongitud de la cinta de sierra: 8800 mmAncho de corte: 1,6 mmVelocidad de la banda: 16 - 100 m/minCarga de la mesa: 15 tPotencia total requerida: 18 kW Peso de la máquina aprox.: 7 tDimensiones de la máquina aprox.: MSierra de cintaautomática Behringer HBP 650 A

cutting diameter: 460 mmsaw band length: 5200 x 41 x 1,3 mmcutting width: 470 mm: 460 mmCapacity 90° rectangular: 470 x 460 mmcutting speed: 20 - 100 m/mintotal power requirement: 5,2 kWweight of the machine ca.: 1,66 tdimensions of the machine ca.: 3,1 x 3,1 x 1,8 mFully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automatically. The machines ar ...

cutting diameter: 560 mmsaw band length: 6000 x 41 x 1,3 mmcutting width: 570 mm: 560 x 560 mmCapacity 90° rectangular: 570 x 560 mmspeeds steplessly adjustable: 20 - 100 m/mintotal power requirement: 6,0 kWweight of the machine ca.: 2,24 tdimensions of the machine ca.: 3,5 x 1,05 x 2,05 mFully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop automat ...

: 300 mm: 300 mm: 300 x 260 mmsaw band length: 3920 x 34 x 1,1 mmtable height: 780 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 1,65 tdimensions: 2,0 x 2,05 x 1,7 mPROMOTIONAL PRICE2-column high-performance automatic band saws from the SBS seriesThe SBS series impresses with its sophisticated technology, high quality and longevityand unrivaled, sophisticated standard equipment.• Modern SNC 20 control for CNC version• Frequency-controlled saw drive• Control buttons with pictograms• Work light• Powered chip brush• Hydraulic belt tension• Clamping pressure regulation• Double vice (before and after the belt)• Creep path for positioning• Bundle tension prepared electrically and hydraulically• Chip conveyorThe SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. W ...

cutting diameter: 380 mmsaw band length: 4570 x 42 mmcutting width: 380 mmband speed: 15 - 120 m/min: 380 mm: 380 mm: 380 x 400 mmtotal power requirement: 5,6 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 2600 x 2600 x 2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 saw band length: 8140x54x1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 4,96 tdimensions of the machine ca.: 5,7 x 4,0 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mmcapacity 90 degrees: square: 480 mm: 610 x 450 saw band length: 5320 x 34 x 1,1 mmband speed: 15 - 100 m/mintable height: 820 mmtotal power requirement: 3,0 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,65 x 2,8 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 820x610 saw band length: 5850 x 41 x 1,3 mmband speed: 15 - 100 m/mintable height: 800 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4,45 tdimensions of the machine ca.: 5,85 x 3,6 x 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 mmcapacity 45 degrees: round: 680 mmcapacity 45 degrees: square: 600 mmcapacity 45 degrees: flat: 870x600 mmcapacity 60 degrees: round: 580/550 mmcapacity 60 degrees: square: 530/450 mmcapacity 60 degrees: flat: 550x450 mmsaw band length: 8140 x 54 x 1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,3 tdimensions of the machine ca.: 5,75 x 4,2 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 330 mm: 330 mm: 400x330 mmsaw band length: 4570 x 34 x 1,1 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 3,7 kWweight of the machine ca.: 2,35 tdimensions: 2,23 x 2,15 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 460 mm: 460 mm: 460 x 460 mmsaw band length: 5450 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,2 tdimensions: 2,675x 2,15 x 2,05 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 550 mm: 550 mm: 550 x 550 mmsaw band length: 5980 x 41 x 1,3 mmtable height: 800 mmband speed: 20 - 100 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 3,8 tdimensions: 3,0 x 2,15 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 310 mm: 310 mm: 340 x 310 mmsaw band length: 3730 x 34 x 1,1 mmtable height: 922 mmband speed: 15 - 100 m/mintotal power requirement: 3,0 kWweight of the machine ca.: 1,65 tdimensions: 1950x1755 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

oferta 22489 Características técnicas: - Rango de corte a 90 unos 320 m - plano 320 x 320 mm - Máquina de reposición de materiales - Dimensiones de la hoja de sierra de cinta 5095 x 34 x 1,1 mm - Velocidad de corte de 10 a 120 m/min - Hidr. Elevación: bajar el marco de la sierra - limitación de la carrera superior del marco de la sierra - Presión de corte infinitamente ajustable - Hidr. Poste de sujeción de material - Tornillo transportador de virutas - Dispositivo refrigerante - Transportador de rodillos de descarga 2500 mm - Accionamiento 400 V / 4.0 kW - Espacio requerido aprox. An 2500 x H 1950 x D 2000 mm - Peso aprox. 2200 kg

cutting diameter: 1020 mmsaw band length: 9500 mmcutting width: mmControl: total power requirement: 7,5 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 4500 x 1700 x 2750 mmBrand: BMSYType: 1020CYear of make: 2019Capacity round 90º: 1.020 mm øCapacity square 90º: 1.020 mmCapacity rectangular 90º: 1.020 x 1.020 mmMitre: 45 °Working height: 535 mmSaw blade dimension: 9.500 x 54 x 1,6 mmSaw motor: 7,5 kWMachine dimensions (lxwxh): 4.500 x 1.700 x 2.750 mmMachine weight: 6.950 kgClamp: 1 x 45 ° adjustableHydraulic clamping including top clampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 810 mmsaw band length: 8200 mmcutting width: mmControl: total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4020 x1630 x 2570 mmBrand: BMSYType: 810 CGHYear of make: 2019Capacity round 45º: 555 mm øCapacity round 60º: 320 mm øCapacity round 90º: 810 mm øCapacity square 45º: 700 mmCapacity square 60º: 310 mmCapacity square 90º: 770 mmCapacity rectangular 45º: 555 x 770 mmCapacity rectangular 60º: 310 x 770 mmCapacity rectangular 90º: 810 x 770 mmMitre: 60 °Saw blade dimension: 8.200 x 41 x 1,3 mmSaw speed: 20 - 100 m/minSaw motor: 4 kWMachine dimensions (lxwxh): 4.020 x 1.630 x 2.570 mmMachine weight: 3.970 kgCap. 30 ° round: 700 mm øCap. 30 ° straight: 700 x 770 mmCap. 30 ° square: 700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sierra de cinta automática BOMAR Diámetro máximo: Ø 250 mm Sujeción hidráulica del mandril Corte recto y angular Descenso automático Posibilidad de trabajar de forma manual o automática 2 velocidades de rotación de la cuchilla Bomba de lubricante Voltaje: 380 V Longitud: 2000 mm Profundidad: 1800 mm Altura total: 1800 mm Peso: aprox 1,5 T

cutting diameter: 320 mmsaw band length: 4335 x 32(34) x 1,1 mmcutting width: mmtotal power requirement: 3,0 kWweight of the machine ca.: 1,27 tdimensions of the machine ca.: 2,4 x 1,750 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmcapacity 90 degrees: flat: 470 x 320 mmcapacity 45 degrees: round: 320 mmcapacity 45 degrees: flat: 300 x 320 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: flat: 190 x 320 mmsaw band length: 4335 x 32(34) x 1.1 mmcutting speed: 20 - 90 m/mintotal power requirement: 2,53 kWweight: 1296 kgrange L-W-H: 2400 x 1506 x 2000 mmFurnishing:- stepless speed adjustment of the saw band- Handwheel for saw band tension- stable machine stand in welded construction- Rotary table for miter adjustment- Fast / precise setting of the miter areas- Quick release material- Material support table with circumferential water channel- clear control panel for electrical and hydraulic central control- coolant device- Required instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 3800x5000 mmdimensions: 3000x1200x1100 mmweight: 350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 3660 x 27 x 0,9 mmtable height: 650 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 300 mmcapacity 45 degrees: round: 280 mmcapacity 45 degrees: square: 200 mmcapacity 60 degrees: round: 200 mmcapacity 60 degrees: square: 140 mmcutting speed: 15-105 m/mintotal power requirement: 1,2 kWweight of the machine ca.: 630 kgdimensions of the machine ca.: 2000 x 1300 x 1030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1200 mm, 1510 mm

Sierra de cinta Danobat con área de corte 1510 x 1200 mm. Alimentación automática, carga máxima del transportador de rodillos 30000 kg. El desmontaje y la carga gratuitos en camión son posibles a bajo coste. Instalación y puesta en marcha bajo pedido.

OFRECEMOS UN EXCELENTE ESTADO DE SIERRA DE CINTA TOTALMENTE AUTOMÁTICA DOCUMENTACIÓN DE INCLUDIN PARA EL CLIENTE PODEMOS ORGANIZAR EL TRANSPORTE TAMBIÉN PODEMOS ORDENAR PARA EL CLIENTE RESERVAR CUCHILLAS.

FMB ORION CON ÁNGULO DE CORTE IZQUIERDO Y DERECHO MOVIENDO EL VICIO DE IZQUIERDA A DERECHA ASPECTO DE CAPACIDAD DE CORTE EN LAS FOTOS RONDA: 240 CUADRADO : 240X240 ÁNGULO DE CORTE 1. - 45. 2. 0 ... PARA 60 PARA EL CLIENTE LIMPIAREMOS Y PREPARAREMOS LA MÁQUINA PARA EL ENVÍO. ASÍ TAMBIÉN PODEMOS OFRECER TRANSPORTE PARA NUESTRO CLIENTE

Diámetro de corte: máx. 250 mmde alimentación:: . accesorios:: Ersatzbänder

Zona de corte redonda: 250 mm Superficie de corte rectangular: 250 mm Dimensiones de la banda de sierra: 3660 x 25 x 0,9 mm Velocidad de banda: 20 - 70 m/min Unidad de sierra: 1 kW Requisito de espacio: 1900 x 1450 x 1250 mm Peso: aprox. 850 kg

Oferta 23148 Características técnicas: - Con dispositivo hidráulico de sujeción y alimentación - Área de corte aprox. 320 mm - Cuadrado 300 x 300 mm - Gran longitud de sección para una sola carrera de hasta 400 mm - Alimentación múltiple de hasta 10 x 400 mm - Dimensiones de la sierra de cinta 3660 x 25 x 0,9 mm - Velocidad de corte infinitamente variable 20 - 100 rpm - Velocidad de avance hidráulicamente variable de forma continua - Dispositivo de refrigeración - Altura del soporte del material 720 mm - Cinta de sierra - Accionamiento 400 V / 2,5 kW - Necesidad de espacio aprox. 1950 x 1250 x 1500 mm - Peso aprox. 1000 kg

- 2 Ejecución saeulen - Área de trabajo Durchm. u. Cuadrado 420 mm - Longitud de alimentación del material 3 - 600 mm alimentación simple, - Velocidad de corte infinitamente variable 12-100 m/min. - Dimensiones Heegeband 6050 X 40 X 1,3 mm - Accionamiento 9,5 kW - Dimensiones L/BH 2050 x 2725 x 2080/ 2530 mm - Peso: 4000 kg - Dimensiones de la máquina: L x W 1500 x1900 mm - Peso: aprox. 1700 kg

Nota: Revisión general de la máquina en 2020

Key data: 320 mm, 4700 mm, 500 mm

Máquina de sierra de cinta de metal En buen estado YOC 2009 Listo para su uso inmediato A la llamada La HBA 500 S i tiene una construcción estable de 2 columnas y se caracteriza por el mejor rendimiento de corte y un control simple y claro. Se garantiza el más alto nivel de precisión y seguridad. Gracias a la amplia gama de accesorios, estos modelos pueden convertirse en una máquina para sierras automáticas muy exigentes. El rango de trabajo, la calidad de corte y el rendimiento hacen de la HBA 500 S un modelo superior. Accesorios estándar: Control DP 100 con pantalla táctil de 7 pulgadas, guías de metal duro, cepillo de virutas accionado por motor, ajuste hidráulico de la presión de corte, bastidor de sierra reforzado, tecnología de sierra de cinta de 34 mm, sistema de refrigeración, transportador de rodillos integrado de 1200 mm Dimensiones de la hoja de ...

cutting diameter: 355 mmdimensions of saw-band: 3770 x 34 x 1,1 mmcutting speed: 20 - 80 m/mincutting width: 490 x 280 mm: 290 mmImpact energy: 250 mm: 230 mm: 180 mmconnected load frequency: 400 Volttotal power requirement: 2,2 kWweight of the machine ca.: 0,7 tdimensions: 1,43 x 0,72 x 1,7 mSemi-automatic miter band saw- Miter cuts up to 45° left + right- Miter cuts up to 60° right- Vice with quick release device- Tape tension control via manometer- Electr. automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

oferta 22492 Características técnicas: - Rango de corte a 90 aprox. 280 mm - plano 410 x 200 mm - Rango de corte 45 redondo 230 mm - plano 245 x 210 mm - Dimensiones de la hoja de sierra de cinta 3660 x 25 x 0,9 mm - Máquina de reposición de materiales - Velocidades de corte infinitamente variables de 17 a 106 m/min - Hidra. subir + bajar el marco de la sierra - Presión de corte infinitamente ajustable 0 - 10 m/min - Potencia total de accionamiento 400 V / 1,1 kW - Dispositivo refrigerante - Parada 1000 mm - Espacio requerido aprox. An 2000 x 1200 x 1000 mm de ancho x alto - Peso aprox. 380 kg

cutting diameter: 230 mmsaw band length: 2730 x 27 mmcutting width: 0,9 mmcapacity 90 degrees: flat: 320 x 130 mmcapacity 45 degrees: round: 180 mmcapacity 45 degrees: flat: 230 x 100 mmcutting speed: 35 - 70 m/mincutting angle: + - 45 °hydraulic motor: 0,37 kWcoolant pump: 0,12 kWsawing motor: 1,5 kWtotal power requirement: 2 kWweight of the machine ca.: 440 kgdimensions of the machine ca.: 1,4 x 0,9 x 1,3 mSetting of the saw pressure by hydr. cylinderCooling device,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 350 mmsaw band length: 4160 x 34 x 1,1 mmcutting width: 350 mmcutting capacity - flat: 400 x350 / 90° mmcutting capacity - flat: 290 x 300 / 45° mmcutting capacity - flat: 400 x 350 / 30° mmcutting capacity - round: 350 / 90° mmcutting capacity - round: 320 / 30° mmcutting capacity - round: 320 / 45° mmfeeds - fine adjustment: 20-100 mmhydraulic motor: 0,37 kWcoolant pump AC: 0,12 kWdrive motor: 2,2 kWtotal power requirement: 2,7 kWweight of the machine ca.: 1,05 tdimensions of the machine ca.: 2100 x 1300 x 850 mAccessories :automatic sawing functions, hydraulic clamping, material feed viadriven rollers, pneum. adjustable lowering speed,sawing programs adjustable via touch screen,EU quality and CE standards,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad 90 grados: redondo: 230 mm Capacidad 90 grados: cuadrado: 230 mm: 280 x 150 velocidad de la banda: 35/70 m/min longitud de la cinta de la sierra: 2770 x 27 x 0,9 mm potencia total requerida: 1,5/1,8 kWpeso de la máquina aprox.: 0,37 kgDimensiones (largo x ancho x alto): 1,5 x 1,2 x 1,3 0Sierra de cinta con micro dispositivo de pulverización

Número de rodamiento: 3418 MÁQUINA DE SIERRA DE BANDA Fabricante: IMET, Tipo: X-TECH 410 Machinen NR.: 033476001, construido: 2003 Especificaciones: Gr. capacidad de aserrado dia. 410 mm Potencia total 5,5 kW Hidráulico. Control CNC. Tamaño de la banda de sierra 6150 x 41 x 1.3 Longitud: 2000 mm, Altura: 2200 mm, Ancho: 3500 mm, Peso: 3450 kg

cutting diameter: 260 mmsaw band length: 3660 mmcutting width: 0,9 mmcutting range - square -: 260 x 260 mmfeed length: 500 mmfeed length: multiple: 5.999 mmcutting speed: 17 - 106 m/mindimensions of saw-band: 3660 x 25 x 0,9 mmsawing motor: 1,5 kWtotal power requirement: 2 kWweight of the machine ca.: 1,05 tdimensions of machine L x W x H: 1,75 x 1,80 x 1,15 mAccessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 320 mm, 5350 mm, 320 mm

Sierra horizontal con control de posición Área de corte redonda: 320 mm Área de corte rectangular: 320 x 320 mm Dimensiones de la sierra de cinta: 5250/5350 x 32 x 1,1 mm Velocidad de la cinta: 15 - 110 m/min Accionamiento de la sierra: 380 V, 4 kW Peso: 2200 kg

cutting diameter: 500 mmcapacity 90 degrees: flat: 800 x 500 mmcapacity 90 degrees: square: 500 x 500 mmcapacity 45 degrees: round: 500 mmcapacity 45 degrees: flat: 530 x 500 mmcapacity 45 degrees: square: 500 x 500 mmcapacity 60 degrees: round: 350 mmcapacity 60 degrees: flat: 350 x 500 mmcapacity 60 degrees: square: 350 x 350 mmsaw band length: 7050 x 54 x 1,3 mmvice: 500 x 800 mmcutting speed: 15 - 100 m/mincoolant tank: 30.0 LiterControl: JAESPA NC height of material-table: 700 mmtotal power requirement: 9.5 kWweight: 3000 kgrange L-W-H: 3200 x 3500 x 2360 mm maintained condition () current new price approx. 90.000 euros Special price on requestFully automatic, NC controlled 2-column band saw machine, for one-sidedMiter cuts up to 60 degrees, for industrial useFor sawing off solid material, pipes and profiles made of steel and cast ironas well as light and non-ferrous metals and simi ...

Dimensiones del material redondo: Ø 380 mm cuadrado: 380 x 380 mm Longitudes de sección para una sola carrera: 10 - 510 mm con carrera múltiple: máx. 4590 mm Dimensiones LxWxH: 3100 x 2200 x 1850 mm Peso: 3.100 kg

- Velocidad de corte: 6 - 30 m/min - Dimensiones de la hoja de sierra: 400 (425) x 50 x 5 mm - Rango de corte 45 plano: 180 x 40 mm - Rango de corte 90 plano: 240 x 70 mm - Rango de corte 90 redondo: 140 mm - Rango de corte 90 cuadrado: 130 mm - Corte a inglete: infinitamente variable 60 -/+ grados - Velocidad de alimentación de la hoja de sierra: 0 - 1.200 mm/min - Sistema de lubricación de cantidad mínima: PPS 401 115326 - Autom. Cargador plano FMA para varillas: 1500 - 7000 mm - Control: Kaltenbach MULTI-COM - Transportador de virutas - Potencia total: 5,5 kW - Peso de la máquina: 4500 kg - Dimensiones (An x Al x Al): 9,45 x 2,59 x 2,1 m - Horas de encendido: 17290 h - Estado: muy bueno Detalles sierra universal totalmente automática, tope de pieza de trabajo para cortes inclinados a izquierda y derecha, iluminación del espacio de trabajo, pinza de secció ...