Bant taşlama makineleri

- Wet double belt grinder for deburring and pre-grinding - 2 abrasive belts with different grain sizes -Water cooling - manual belt centering - Belt speed 7m/sec. - Sanding belts 100/920 mm - 100/915 mm

width of the strips: 150 mmband length: 2000 mmband speed: 29,0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4,0 kW 100% EDweight of the machine ca.: 84,0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table-  ...

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

width of the strips: 75 mmband length: 2000 mmband speed: 29,0 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3,0 kW 100% EDweight of the machine ca.: 66,0 kgrange L-W-H: 1080 x 440 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table- wo ...

Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...

Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg

Key data: 75 mm, 2000 mm

Belt dimension WxL: 75 x 2000 mm Belt speed: 37 m/s Equipped with: - Motorized suction - On mobile base frame Country of origin: Germany Motor power: 4 kW Machine LxWxH: 140 x 55 x 100 cm Machine weight: 100 kg

Description: Composed of 2 BOSCH battery screwdrivers, 1 BOSCH battery flashlight, 2 BOSCH battery chargers, 1 set of countersinksweight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 340 x 200 x 300 mm

width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradtotal power requirement: 3,3 / 400 kW / Vweight of the machine ca.: 0,2 tdimensions of the machine ca.: 1,45 x 1,15 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 2000 mmband speed: m/sectube diameter: 25,4 - 76,2 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 4,0 kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 0,5 x 1,5 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2280 mmband speed: 22 m/sectable-size: 700 x 350 mmroll diameter: 140 / 80 mmmotor speeds:: 2880 1/minrange L-W-H: 1300 x 800 x 1500 mmtotal power requirement: 3,0 kWweight of the machine ca.: 250 kgHorizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized tape oscillation approx. 10mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment:- swiveling grinding unit 90 - 135 degrees- Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3,0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mmFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Factory new with dust extraction automatic belt centering Tool-less change of the sanding belt Sanding belt 60 grit 2000 x 75 mm Band width 150 mm Plan grinding range 500 mm Belt speed 15 / 30 m / s Weight 120 kg Motor pole change-over bar 2.2 / 3,75 kW Suction motor 0.37 kW Machine dimensions 950 x 430 x 1050 mm Lieferumpfang: incl. belt 60 grit Connection cable with CEE plug 16 A Dust bag 1 year warranty including packaging and transport in Germany

High-quality construction The drive roller is convex (this automatically centers the abrasive belt in the middle of the roller), fully vulcanized for longest service life and best running smoothness, Tool-free and therefore quick, uncomplicated change of the sanding belt, infinitely variable height adjustment for optimal setup of the belt sander to the user, freely adjustable metal stop for optimal and safe guidance of workpieces when using the large surface grinding area, Optimized belt speed in terms of design, so that burning of the workpiece during machining can be excluded as far as possible, Motor protection switch with CEE collar plug incl. phase changer, 5-year warranty on the engine Strip length 2000 mm Belt width 75 mm Surface grinding range 600 mm Belt speed 30 m/s Colour RAL 9007 Three-phase motor 400 V 3.0/3.75 kW Machine dimensions (W x D x H) 1100 x 550 x  ...

High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...

The Ghermandi Caliber 300 belt grinding machine is a powerful machine for precise grinding of workpieces. With a length of 1.2m, a width of 1m and a height of 1.8m, it is compact and space-saving. The machine has a robust construction and precise operation, which ensures high accuracy even in demanding grinding jobs. Due to its versatile adjustment options, the Ghermandi Caliber 300 belt grinding machine is suitable for a variety of applications and ideal for use in workshops, production halls and other industrial environments. Further information can be found in the PDF file. ---------------------------------------------------------------------- ----- The Ghermandi Caliber 300 belt grinding machine is a powerful tool for precision grinding of workpieces. With a length of 1.2m, a width of 1m, and a height of 1.8m, it is compact and space-saving. The machine features a robust con ...

The belt sanding machine Ghermandi Caliber 300 2NT, type CL 300M RT 2N, is a robust and reliable machine, perfect for sanding metals, wood and plastics. With an output of 33.5 amperes and 380 volts, it is particularly powerful and can easily handle even heavy grinding work. The machine has a wide grinding table that provides a large grinding surface and allows precise work. The grinding table is also height adjustable to ensure an optimal sanding position. In addition, the belt sanding machine Ghermandi Caliber 300 2NT is equipped with a powerful motor and a stable belt run, which ensures uniform grinding quality. Thanks to its compact design and sturdy housing, the belt sanding machine Ghermandi Caliber 300 2NT is very durable and easy to operate. It is perfect for craftsmen, industrial companies and workshops that place high demands on their grinding machines. If you are looki ...

- Sanding belt dimensions: length 2,520 mm - Total power: 1.3 / 1.16 kW - Machine weight: 420 kg - Space requirement (W x D x H): 1.0 x 1.0 x 2.0 m Details good running condition Accessories Drive wheels 2 x 50 mm, 2 x 30 mm width

Inv. Num. : 6074 Type: GR-2300-900-WWB Producer: GRINDINGMASTER Created: 2002 Parameters: Sanding belt length: 1900 mm Sanding belt width: 930 mm Cutting thickness: 1-150 mm Rated current: 44 kW Weight: 2350 kg Machine dimensions: 2700 x 2000 x 2000 mm

width of the strips: 75 mmband length: 2000 mmband speed: 2850 m/mintube diameter: mmangle adjustable from - to: Gradconnected load frequency: 400 Vtotal power requirement: 4,0 kWweight of the machine ca.: 0,18 tdimensions of the machine ca.: 0,5 x 1,4 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 150 mm, 2000 mm

Machine Type: Metal Belt Sander Manufacturer: GRIT Model: GS 150 Year of construction: 2000 Condition: very good Offer Type: Used Machine Specifications: Grinding area: 150 mm bandwidth max. grinding length 360 mm Drive type: el./mech. Propulsion: 4.0 kW Remark: Tape size: 2000 x 150 mm, 1 spare strap, 4 machine feet, Chip trap Weight: 95 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 100 x 915 mmwork table:: 225 x 155 mmtotal power requirement: 0,44 kWweight of the machine ca.: 0,018 tdimensions of the machine ca.: 0,56 x 0,26 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 100 x 915 mmwork table:: 225 x 155 mmtotal power requirement: 0,44 kWweight of the machine ca.: 0,018 tdimensions of the machine ca.: 0,56 x 0,26 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 1220 mmband speed: 1140 m/min.: 0,62 x 0,4 x 0,35 cmtotal power requirement: 1,5 kWweight of the machine ca.: 0,04 tdimensions: 0,97 x 0,67 x 0,37 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 1220 mmdimensions of grinding wheel: 225 mmwork table:: 150 x 400 mmTable tiltable up to: 90 Gradtable surface area: 150 x 130 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 35 Kgdimensions of the machine ca.: 650 x 360 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 33 m/sectotal power requirement: 4 kWweight of the machine ca.: 100 tdimensions of the machine ca.: 1,2 x 0,5 x 0,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 200 x 32 mmgrinding wheel hole diameter: 30 mmtotal power requirement: 0,9 kWweight of the machine ca.: 35 Kgdimensions of the machine ca.: 620 x 540 x 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 200 mmwork table:: 170x125 / 265x150 mmtotal power requirement: 0,5 kWweight of the machine ca.: 26 Kgdimensions of the machine ca.: 0,6 x 0,5 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/sectotal power requirement: 3 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 1,2 x 0,5 x 0,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 2,5 /3,3 kWweight of the machine ca.: 0,19 tdimensions of the machine ca.: 1,2 x 0,75 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connected load frequency: 230 Vweight: 4,7 kgrange L-W-H: 620 x 240 x 180 mmoutput: 0,8 KWgrinding band dimension: 40 x 760 mmtube diameter max.: 180 mmband speed: 2,4 - 9,1 m/sThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Contact belt grinding machine - Width: 100cm - Depth: 50cm - Height: 200cm - 1 kW - 1400 rpm Good condition fully functional can be visited and tried out on site. Shipping abroad. Bjb9nyul9y Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

width of the strips: 150 mmband length: 2000 mmband speed: 30 m/mingrinding range: 150 x 540 mmvoltage: 400 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 110 Kgdimensions of the machine ca.: 1x0,5x1 mArt.-No.16680The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Sanding belt dimensions approx. 50 x 2500 mm - Contact wheel diameter approx. 250 mm - Drive 400 V / 5.5 kW - Space requirement approx. W 1350 x H 2050 x D 900 mm - Weight approx. 200 kg

offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

The machine can be viewed from 18.01.2023 at the location 94036 Passau by appointment. Specifications: - Sanding belt dimensions approx. 3500 x 5 to 75 mm - Contact wheel diameter up to approx. 12 to 300 mm - Drive pulleys 100 to 225 mm - 2 sanding belt speeds - Heights + depth adjustable contact wheel / grinding roller - Drive 400 V / 4.0 kW - Space requirement approx. W 700 x H 1700 x D 1400 mm - Weight approx. 200 kg

band width: 100 mmband length: 3500 mmband speed: 21 - 36 m/secgrinding diameter: 10 - 200 mmfeed speeds: 0 - 20 m/minKontaktscheiben-Ø: 200 - 400 mmVorschubräder - Abmessung: 200 x 75 x 56 mmmaterial: Gummi Absaugstutzen: NW 120 voltage: 380 V / 50 HzMotordrehzahlen: 2910 U/minpower capacity: 5.5 kWweight of the machine ca.: 0,6 t• Machine with 2 roller conveyors (Length: 2 m) for roller passageThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

-Emassing 2m long; 1.3m wide; 1.1m high -400V; 50Hz; 10kVA; 35A -11.5KW Qvcdc9vbp -Pneumatics 6bar -grinding belt 300mm wide; 4088mm long; -Speed 15-30 m/s -ca 77 dbA -Wet grinding direction 0.24kW; 90l/min -Fuell quantity 115liter -Weight 250kg

Machine Type: Horizontal Belt Sander Manufacturer: NAPP Model: TB 200 Condition: ready for use Offer Type: Used Machine Specifications: Sanding area: 200 x 920 mm Drive type: el./mech. Propulsion: 3 Hp Remark: integrated suction Weight: 80 kg The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

width of the strips: 150 mmband length: 2000 mmband speed: 29,0 / 14,5 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3,0 kW 100% EDweight of the machine ca.: 90,0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 150 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks ...

width of the strips: 150 mmband length: 2000 mmband speed: 29 / 14,5 m/stotal power requirement: 3,0 kWweight of the machine ca.: 90 kgdimensions of the machine ca.: 421x967x1069 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mmband length: 2000 mmband speed: 30 m/stotal power requirement: 3,0 kWweight of the machine ca.: 70 kgdimensions of the machine ca.: 610 x 944 x 1419 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75,0 mmband length: 2000 mmband speed: 29,0 / 14,5 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3,0 kW 100% EDweight of the machine ca.: 72,0 kgrange L-W-H: 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEELThe free-standing belt sander PÁSOVEC 75 is a 2-speed machine forefficient and at the same time economical sanding of surfaces, edges andRounding of parts made of carbon and stainless steel, aluminum and other non-ferrous metals such as wood and plastic. The machine has a totaltwo workstations for contact and face grinding. The height of the grinding armcan be adjusted to the operators body proportions. The machinehas an integrated preparation for the suction connection ex works. TheChanging the sanding belt is just one thing thanks  ...

width of the strips: 75 mmband length: 2000 mmband speed: 29 / 14,5 m/stotal power requirement: 3,0 kWweight of the machine ca.: 72 kgdimensions of the machine ca.: 533x967x1069 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7026 Type: FGW 170 4Z Producer: NS MAQUINAS Created: 2019 Parameters: Abrasive belt length: 2000 mm Abrasive belt width: 170 mm Workpiece width: 170 mm Max. workpiece height: 200 mm Belt speed: 10-25 m/s Number of abrasive belts: 4 Length: 3600 mm Width: 1200 mm Height: 2000 mm Weight: 2200 kg Equipment: Water Cooling

Specifications: - Sanding belt dimensions approx. 50 x 2000 mm - Grinding wheel dimensions approx. 200 x 32 x 51 mm - Sanding belt speed approx. 30 m/sec. - Speed 2900 rpm - Drive 380 V / 0.9 kW - Space requirement approx. W 800 x H approx. 1800 x D 500 mm - Weight approx. 150 kg

Specifications: - Polishing wheels - grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions 400 x 50 mm - Drive speed 1450 rpm - Drive 400 V / 1.8 kW - Space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg

rotary table dia.: . mmmax. dia. of grinding wheel: . mmwith manual ongoing: . 0manually feed: . 00.4 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 30 - 34 m/sectotal power requirement: 4 kWweight of the machine ca.: 100 Kgdimensions of the machine ca.: 1,2 x 0,5 x 0,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.