Fabricante:
(Categoria: 104)
: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 €: 250 x 40 x 51 mm: 1300 x 75 mm: 1,4 kW: 1400 1/min: 15 m/s: 42 mm: 600 mm: 540 mm: 1190 mm: 1200 x 800 x 1000 mm: 70 kgWith base frame, integrated suction and brakeHigh performanceBelt grinding device height adjustable 0-90°.Maximum usable face grinding areaBelt adjustment with fine adjustmentLongitudinal stop for material guidePerfectly balanced and low vibrationConnection on both sides for dust extraction Ø 50 mmMotor protection switch with undervoltage releaseFixed stop1 Sanding belt standard (brown), grit 801 grinding wheel 250 x 40 x 51 mm, grit 80Spark protectionConnection cable with CEE plugALTERNATIVES:Version without suction (Art. 330.365)Version without stand, suction and brake (Art. 330.360)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: 350 mm: 300 mm: 500x160 mm: 350x150 mm: 300x150x55 mm: 2800 1/min: 3,6 kW: 1020 mm: 820 mm: 2170 mm: 440 kg: Dm. 200x78x78 mmThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric s ...
novo
: neu : ca. 6 Monate ab Auftragse : Taiwan : 33970 €: 648.83 €: 457 mm: 450 mm: 457 x 203 mm: 450 x 200 mm: 500 mm: 530 mm: 5 - 25 m/min: 960 mm/min: 0,4 - 6 mm: 230 mm: - mm: 2850 1/min: 1,5 kW: 0.75 kW: 0.04 kW: 3,7 kW: 2200 mm: 1575 mm: 1950 mm: 1320 kg: 215 kg: 250 kg: 203 x 12,7 x 31,75 mmmanual vertical feedgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment 34 lt with magnetic separator and dust exhaustmanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ELB-Schliff SWB 015 VA II Surface Grinding Machine Type: Hydraulic surface grinding machine Manufacturer: ELB-Schliff Model: SWB 015 VA II Serial No.: 696710 Control type: Conventional / hydraulic Grinding length: approx. 1500 mm Grinding width: approx. 500 mm Table size: approx. 1500 x 500 mm Grinding wheel size: approx. Ø350 x 30 x Ø127 mm Table type: Magnetic grinding table Machine configuration: Horizontal spindle surface grinder Condition: Used This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-25
: neu : ca. 6 Monate ab Auftragse : Taiwan : 247810 €: 2100 mm: 850 mm: 2000 x 600 mm: 2x 1000 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 7710 mm: 3320 mm: 2850 mm: 6530x3200x3350 mm brutto mm: 10200 kg: 900 mm: 1240 kg: 2000 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape w ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 156790 €: 2963.33 €: 1200 mm: 850 mm: 1200 x 500 mm: 1200 mm: 1200 500 mm: 5 - 30 m/min: 0 - 5000 mm/min: 0,001 mm: 560 mm: 0 - 2000 mm/min: 0.001 mm: 500 - 2200 1/min: 11 kW: 3.7 kW: 3.1 kW: 2.4 kW: 4600 mm: 2950 mm: 2745 mm: 4610 x 2290 x 2500 mm: 6400 kg: 900 mm: 930 kg: 1250 kg: 405 x 50 x 127 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, checkout 7)Air purge spindleLongitudinal guides with double V shape, with Turcite-B coatingTransv ...
novo
: neu : ca. 6 Monate ab Auftragse : Taiwan : 119880 €: 2265.73 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 0 - 20 m/min: 0 - 3000 mm/min: 0,001 mm: 350 mm: 440 mm: 0 - 3000 mm/min: 0.001 mm: 500 - 1800 1/min: 11 kW: 3160 mm: 2450 mm: 2080 mm: 3400 x 2200 x 2530 mm: 4000 kg: 975 mm: 195 kg: 370 kg: 355 x 50 x 127 mm: 1,1 / 1,1 kW: 3.9 kW: 0,005 mm: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 4 angular contact ball bearings (P4, class 7)Longitudinal and cross guides with heavy duty needle roller bearing for lo ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 73990 €: 1398.41 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 420 kg: 700 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 350 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2000 1/min: 5,5 kW: 0.75 kW: 1.1 kW: 1.1 kW: 2710 mm: 2428 mm: 2200 mm: 3500 kg: 975 mm: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working areagrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED mach ...
TCHA-5 Circular Saw Blade Sharpening Machine (USSR) Description Industrial circular saw blade sharpening machine, model TCHA-5, manufactured in the USSR. Designed for sharpening steel circular saw blades (not carbide) used in woodworking. The machine operates with a grinding wheel and a mechanical feed system, ensuring precise and consistent sharpening. Technical Data • Model: TCHA-5 • Serial Number: 428 • Origin: USSR • Saw Blade Diameter: Ø200 – Ø800 mm • Grinding Wheel Size: 250 × 10 × 32 mm • Machine Type: Circular Saw Blade Sharpener (Steel Blades) Features • Mechanical Feed • Mechanical Height Adjustment • Mechanical Tooth Height Adjustment • Grinding Wheel Operation • Robust Industrial Design Important Information Only suitable for tooth profile type IV (straight). Not suitable for other tooth geometries. Condition • Grinding wheel ...
MININI large surface grinding machine with guarding and control panel. Magnetic chuck. Travels 1800 mm x 800 mm Exact model, grinding capacity, coolant system approx. 4500 x 2500 x 2600 Auction-ID: A1-47114-18
Machine Type Manual Surface Grinder Manufacturer Falcon Machine Tools Co., Ltd. (Chevalier) Model FSG-618M Country of Origin Taiwan Serial Number A378A001 Machine Category Precision surface grinding Working Capacity Item Specification Table Size 150 × 450 mm Max Grinding Length 460 mm Max Grinding Width 180 mm Max Distance Table to Spindle Center approx. 400 mm Max Workpiece Weight approx. 100 kg Table & Movement Axis Travel Longitudinal (X) 460 mm Cross (Y) 150 – 180 mm Vertical (Z) 400 mm Item Specification Table Type Reciprocating Table Drive Hydraulic (with manual control option) Magnetic Chuck Permanent magnetic chuck (visible) Grinding Wheel & Spindle Item Specification Grinding Wheel Size approx. Ø180 × 13 × 31.75 mm Spindle Speed approx. 2850 rpm Spindle Type Horizontal spindle Motor & Electrical Item Specification Spindle Motor Power approx. 1.5 – 2.2 kW ...
Machine Type Tool and Cutter Grinder Manufacturer Feinmechanik Michael Deckel Model SO Country of Origin Germany Serial Number 81-21019 (as visible) Machine Category Precision tool grinding machine Max Tool Diameter approx. 20 – 30 mm Max Tool Length approx. 200 mm Grinding Length approx. 100 mm Collet Type Deckel collet system Collet Range approx. Ø3 – Ø20 mm Grinding Wheel Diameter approx. 100 – 125 mm Spindle Speed approx. 5,000 – 6,000 rpm Motor Power approx. 0.25 – 0.5 kW Axis Travel Longitudinal (X) approx. 150 mm Cross (Y) approx. 100 mm Vertical (Z) approx. 100 mm Workhead Rotation 360° Workhead Tilt ±15° to ±30° Table & Workholding Item Specification Table Type Precision slide table Tool Holding Collet chuck Indexing Manual indexing head Adjustments Fine micrometric adjustments Electrical Data Item Specification Power Supply 220 / 380 V (depending on versi ...
TOOL / CUTTER SHARPENING MACHINE - O.T.M. – SCHNEEBERGER LICENSE (ITALY / SWITZERLAND) Description Industrial tool and cutter sharpening machine, manufactured in Italy (O.T.M. – Reggio Emilia) under Swiss Schneeberger license. Precision-built machine suitable for sharpening various woodworking tools, including milling cutters and profile knives. Technical data • Manufacturer: O.T.M. (Italy) • License: Schneeberger (Switzerland) • Machine type: tool / cutter sharpening machine • Construction: industrial, precision Features • Precision grinding • Heavy-duty cast construction • Manual operation • Water cooling system • Suitable for a wide range of tools Important information The machine is not equipped with cones / tool holding accessories These are required for operation No additional technical data available Condition • Used machine ...
CHEVALIER FSG-618M Manual Surface Grinder Type: Manual surface grinder Manufacturer: Chevalier Model: FSG-618M Grinding length: 457 mm / 18.0 in Grinding width: 152 mm / 6.0 in Table size: 150 x 460 mm / 5.9 x 18.1 in Maximum table travel: 482 mm / 19.0 in Maximum transverse travel: 180 mm / 7.1 in Distance from table to wheel centreline: 450 mm / 17.7 in Maximum table load: 210 kg / 462 lbs Spindle and Grinding Wheel Spindle speed: 2,850 rpm at 50 Hz / 3,450 rpm at 60 Hz Spindle motor: 1.5 kW / 2 HP Grinding wheel size: Ø205 x 12.7 x Ø31.75 mm / Ø8 x 0.5 x Ø1.3 in Machine Data Machine dimensions: approx. 1,900 x 1,400 x 2,130 mm / 74.8 x 55.1 x 83.9 in Net weight: approx. 674 kg / 1,480 lbs This item is delivered loaded on truck or container 20`OpenTop. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-19
CARBIDE CIRCULAR SAW BLADE SHARPENING MACHINE - CIT Meccanica HECTOR 600 (NO: 10596) Description Circular saw blade sharpening machine, model CIT Meccanica HECTOR 600, manufactured in Italy, designed for carbide-tipped (TCT / vidia) circular saw blades. The machine operates with a diamond grinding wheel and is equipped with a water cooling system, ensuring precise sharpening and preventing overheating. Technical data • Manufacturer: CIT Meccanica (Italy) • Model: HECTOR 600 • Serial number: 10596 • Year of manufacture: 1996 • Machine type: carbide circular saw blade sharpener Capacity: • Max. blade diameter: Ø600 mm Electrical data: • Voltage: 380 V • Frequency: 50 Hz • Power: 0.30 kW Weight: • 210 kg Features • Diamond grinding wheel • Water cooling system • Compact design • Simple and reliable operation • Made in Italy ...
Carbide Circular Saw Blade Sharpening Machine – ZAKŁAD METALOWY OSW-5 (No.: 249/08/04) Description Industrial circular saw blade sharpening machine, model OSW-5, manufactured in Poland, for carbide-tipped (TCT/Vidia) circular saw blades. The machine operates with a diamond grinding wheel and a water cooling system, ensuring precise sharpening without overheating. Equipped with a control unit for adjusting the number of teeth and the number of cycles, it allows for semi-automatic operation. Technical Data • Manufacturer: Zakład Metalowy (Poland) • Model: OSW-5 • Serial Number: 249/08/04 • Machine Type: Carbide Circular Saw Blade Sharpener Capacity: • Saw Blade Diameter: Ø100 – Ø600 mm Electrical Data: • Voltage: 400 V • Frequency: 50 Hz Features • Water Cooling (Electric Pump) • Adjustable Tooth Count and Cycle Settings via Control Unit • Semi- ...
BANDSAW BLADE SHARPENING AND SETTING MACHINE - OSAMA AF/S-50 (NO: 9104/1997) Description Industrial bandsaw blade sharpening and setting machine, model OSAMA AF/S-50, manufactured in Italy. The machine operates automatically and is designed for sharpening bandsaw blades. The AF/S version allows both sharpening and tooth setting (bending). Technical data • Manufacturer: OSAMA (Italy) • Model: AF/S-50 • Serial number: 9104/1997 • Machine type: bandsaw blade sharpening and setting machine Capacity: • Max. blade width: 50 mm • Max. tooth pitch: approx. 35 mm Operation: • Sharpening speed: ~60 teeth/min • Setting speed: ~80 teeth/min Grinding unit: • Speed: 1500 rpm • Max. grinding wheel diameter: Ø150 mm Drive: • Motor power: ~0.25 kW Weight: • approx. 80 kg Features • Automatic operation • Sharpening and setting in one machin ...
DRILL SHARPENING MACHINE - CHRISTEN 1-32 Description High-precision drill sharpening machine, model Christen 1-32, manufactured in Switzerland, designed for sharpening twist drills. Industrial-grade equipment capable of restoring full drill geometry. Equipped with a hydraulically driven grinding head and semi-automatic operation. Technical data • Manufacturer: Christen (Switzerland) • Model: 1-32 • Machine type: drill sharpening machine Capacity: • Drill diameter: Ø1 – Ø32 mm Features • Precision grinding • Hydraulically driven grinding head • Semi-automatic operation • Foot pedal control • Adjustable point angle • Split point grinding capability • Collet clamping system • Coolant system • Precision grinding wheel dresser included • High repeatability • Heavy-duty industrial construction Advantages • Fast and accur ...
GER CE-450 CNC universal cylindrical grinding machine. Fagor 102S CNC control with Fagor PLC-64 PLC. Year of manufacture: 1997. Distance between points: 450 mm. Power supply: 380 V / 50 Hz. Machine equipped with CNC system, electrical cabinet and refrigeration system. Supplied with technical documentation and manuals available. Coming from an industrial environment. Important: It is recommended that all machinery be checked and inspected by qualified personnel before commissioning. The equipment is sold in the condition it is in, with no warranty on its operation or operational condition. Auction-ID: A7-47333-52
ELB SW20 Surface Grinding Machine Type: Surface grinding machine Manufacturer: ELB Model: SW20 Magnetic table size: 2000 x 700 mm Axes travel: X 2100 mm / Y 850 mm / Z 500 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-47114-33
Carbide-tipped circular saw blade sharpening machine – Vollmer Dornhan FINIMAT IIA/600TS Description Industrial circular saw blade sharpening machine, model Vollmer FINIMAT IIA/600TS, manufactured in Germany, for carbide-tipped (TCT/Vidia) circular saw blades. Equipped with a hydraulic feed system and an automatic cycle, the machine ensures precise and consistent tooth grinding. It operates with a diamond grinding wheel and allows for complete adjustment of the tooth geometry. Technical Data • Manufacturer: Vollmer (Germany) • Model: FINIMAT IIA/600TS • Machine Type: Carbide Circular Saw Blade Sharpening Machine Capacity: • Saw Blade Diameter: Ø100 – Ø600 mm • Max. Tooth Pitch: 110 mm • Max. Blade Thickness: 16 mm Grinding Range • Rake Angle: 5° – 45° • Back Angle: 8° – 45° • Top Bevel Angle: 0° – 45° • Side Angle: 0° – 12° Drive ...
KENT KGS-63AHD Hydraulic Surface Grinding Machine Type: Hydraulic surface grinding machine Manufacturer: Kent Industrial Co., Ltd. Country of manufacture: Taiwan R.O.C. Model: KGS-63AHD, to be confirmed Control type: Conventional / automatic hydraulic surface grinder Table size: 600 x 300 mm Longitudinal table travel: 710 mm Cross feed travel: 340 mm Distance from spindle centre to table: 600 mm Table load including magnetic chuck: 420 kg Grinding wheel size: 355 x 38 x 127 mm Spindle motor: 3.7 kW Voltage: 380 V Phase: 3 phase Frequency: 50 Hz Total power: approx. 6 kW, to be confirmed Machine height: approx. 1,830 mm Floor space / overall footprint: approx. 2,600 x 2,500 mm Machine dimensions: approx. 2,600 x 2,200 x 1,830 mm Net weight: approx. 1,750 kg Gross weight: approx. 2,200 kg Condition: Used This item is delivered loaded on truck. Dismantling and loading costs are specified a ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 232840 €: 1700 mm: 850 mm: 1600 x 600 mm: 2x 800 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 6165 mm: 3320 mm: 2850 mm: 5730x3200x3350 mm brutto mm: 9500 kg: 900 mm: 1335 kg: 1850 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape wit ...
: neu : ca. 6 Monate ab Auftragse : Taiwan : 21770 €: 417.98 €: 457 mm: 460 x 146 mm: 450 x 150 mm: 482 mm: 180 mm: 1900 mm: 1400 mm: 2130 mm: 680 kg: 208 x 12,7 x 31,75 mm: 1,5 kW: 3 mm: 0,01 mmmanual vertical feedmanual longitudinal and cross movement of the tablegrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuck150x450 mmcoolant equiptment with filtermanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Type Rod Cutting & End Grinding Machine Manufacturer Lee Yagn Machinery Co., Ltd. Model LY-500 Serial Number 03977 Year of Manufacture 1994 Country of Origin Taiwan Machine Function Cutting-off and end surface grinding of rods/tubes Max Rod Diameter approx. Ø10 – Ø50 mm (estimated) Max Rod Length Unlimited (through-feed type) Clamping System Manual V-block clamp Processing Type Simultaneous cut-off + end grinding Motor Voltage 380 V Frequency 50 Hz Motor Power approx. 1.5 – 3 kW (typical for this size) Machine Dimensions (L × W × H) approx. 800 × 600 × 900 mm Machine Weight approx. 120 KG Auction-ID: A1-47114-9
: neu : ca. 6 Monate ab Auftragse : Taiwan : 171130 €: 3234.36 €: 610 mm: 590 mm: 600 x 300 mm: 600 x 300 mm: 0 - 25 m/min: 0 - 4000 mm/min: 0,001 mm: 350 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3103 mm: 3933 mm: 2480 mm: 5800 kg: 810 mm: 314 kg: 420 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 3.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC ser ...
5.000 € 
