Fabricante:
(Categoria: 104)
- Engine 0.37 KW-2850 rpm. - Maximum wheel diameter approx. 200 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48426-723
- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48426-722
usava
grinding length: 600 mmgrinding width: 400 mmworkpiece height: 525 mmtable surface area: 960 x 400 mmdimensions of grinding wheel: 350 mmtable height over floor: mm: 600 x 400 mmgrinding spindle speed: 3000 U/mintable load capacity: 1100 kptotal power requirement: 8,0 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,4 x 1,9 x 2,1 mSurface grinding machine- Magnetic chuck- Coolant system with filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Maximum shaft rotation speed 2880 rpm. - Maximum peripheral velocity: 35 m/s. - Maximum length of the knife head 250 mm. - Wheel diameter 150 mm. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1700 x 1100 x 1900 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-37
- Total installed power approx. 1.10 KW. - Disc diameter from 100 mm to 650 mm. - Disc shaft diameter from 6 mm. - Disc thickness up to 6 mm. - Tooth pitch from 7 mm to 100 mm. - Angle of attack up to -10°. - Clearance angle from 0°. - Diameter of the abrasive disc from 100 mm to 125 mm. - Peripheral speed up to 23 m/s. - Coolant pump flow rate 48 l/min. - Coolant tank capacity 48 l. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 1300 x 900 x 2050 mm. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-48463-36
Special feature: Stepless grinding wheel speed for copper grinding work Auction-ID: A7-48614-20
Saw blade diameter: 100 to 1720 mmTooth pitch: 7 to 110 mmRake angle: -20° to + 45° Clearance angle: 8° to 45°Grinding wheel Ø100 mmSpeed grinding spindle3,600 rpmTotal weight approx. 550 kg Auction-ID: A7-48614-8
Saw blade capacity: Diameter up to 1000 mmTooth pitch: up to 42 mmGrinding wheel Ø: up to 250 mm Maximum. Saw blade thickness: up to 10 mm Auction-ID: A7-48614-21
Feeding takes place on the side of the top of the grinding head and handwheel for the transverse feed path of the grinding wheelGrinding length: 820 mm, longitudinal feed of the grinding carriage with three-phase motor: 380 V. Water cooling works WITHOUT a pump, because the grinding wheel runs sideways in the water. Auction-ID: A7-48614-6
Conversion to Linux CNCworking area: 1150 x 600 mm, table: 3400 long, weight: approx. 2500 to 4000 kg. Auction-ID: A7-48614-18
Note: Converted Saw Blade Sharpening Machine to Milling Cutter Grinding MachineRequires Air Pressure, Without Oil Auction-ID: A7-48614-5
Grinding area: 800 x 500 x 400 mmGrinding surface: 800 x 600 mm, Grinding motor: 9 - 17 kW Auction-ID: A7-48614-15
Weight: approx. 18 tgrinding length: approx. 4.10 m longBed: 7300 mm longincluding: segment grinding head, the original grinding spindle has already been ground over, the plain bearing has to be adjusted, a butt head is supplied to process the bending beams. Auction-ID: A7-48614-19
Functions: Grinding machine for grinding chip splittersSaw blades: Diameter from approx. 20 to 400 mm, including 1 x mobile air compressor 85 cm long and a spare machine for cannibalization. Auction-ID: A7-48614-10
Saw blade diameter: minimal. 80 mm up to a maximum of . 710 mm Tooth Pitch: 3 mm to 25 mmMaximum. Saw blade thickness: approx. 6.5 mmWorking speed: infinitely adjustableGrinding wheel diameter: 200 mm Working speed: infinitely adjustable, usually between 10 and 45 teethWeight: approx. 600 to 1200 kg. Automatic chamfering of both bevels in one rotation Auction-ID: A7-48614-7
Circular saw blade diameter from 80-710 mm, including accessories and cladding. Auction-ID: A7-48614-34
Max. grinding wheel diameter: approx. 100 mm Auction-ID: A7-48624-12
Saw blade capacity: Diameter up to 1020 mmTooth pitch: Up to 42 mmGrinding wheel Ø: Up to 250 mm Maximum. Saw Blade Thickness: Up to 10mmPower Supply: 400V, 3~(Three-Phase), 50Hz. Auction-ID: A7-48614-1
Used, the X axis is out of serviceNote: Due to the size of the machine, it is recommended to inspect the machineDisassembly and loading by buyer, disassembly possible by seller upon requestTransport dimension: approx. 5.50 x 3.20 x 3 m (L/W/H), the head section and side panels can be disassembled. Auction-ID: A7-48614-16
Serial number: 95-8157Max. grinding wheel diameter: 100 mm Auction-ID: A7-48624-11
Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
10 € 
