Fabricante:
(Categoria: 104)
max. grinding diameter: 175 mmgrinding length: mmworkpiece length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This grinder is ideal for regrinding tools such as face milling cutters, drills, TIG welding needles and much more. comes standard with: Accessories for lathe tools Accessories for drills Accessories for milling 5C Spring Collet (4-6-8-10-12 mm) Clutch wrench 38-42 Grinding wheel wrench Allen key M3-M8 Screwdriver Diamond grinding wheel Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond Pen Spring Collet: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connected load 230 / 250 volts / watt Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 kg Dimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5) Auction-ID: A7-49782-407
: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 €: 1 : 100 x 2.000 mm: 20 - 76,1 mm: 1 : 3 kW: 190 kgDEMO MACHINE / MINT CONDITIONThe lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table.Incl. 5 pcs. grinding belts, 1 pce. gr ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 €: 122.59 €: 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine.The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe grinders ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 €: 149.25 €: 1 : 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of mate ...
: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...
grinding length: 300 mmgrinding width: 500 mmworkpiece height: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 750 mmgrinding length: 5400 mmcentre height: 375 mmmax. workpiece diameter: 750 mmworkpiece weight: 10000 kgtable - swivable +/-: - °grinding wheel size: 750/650 x 75 x 305 mmgrinding wheel turining speeds: 750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 15 kWworkpiece drive: 7,5 kWfeeds - fine adjustment: 0,00635 - 0,0508 mm/mintotal power requirement: - kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,4 mRefurbished 2023 and equipped with:- DRO- Table swivable- 9 x steadies- Coolant/Filtration TankMachine has had over 85000,-€ of retrofit work in 2023 including:-- replacement of air bearing liners-- 7 x steadies fully overhauled-- Overhaul of top table & centre heights of workhead & tailstock-- New electrical wiring & cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X-axis (length): ± 350 mm Y-axis (width): ± 200 mm table 350x200MM machine ready for transport and to be assessed on viewing day Auction-ID: A1-48649-141
grinding length: 450 mmgrinding width: 250 mmworkpiece height: 275 mmtable surface area: 550 x 200 mmdistance spindle center to table: max. 400 mmtable speeds: 0 - 30 m/mincross feed: 0 - 60 mm/Hubrapid traverse cross: 1,2 m/mingrinding wheel size: ø 250 x 30 x ø 51 mmgrinding spindle speed: 1400 / 2800 U/mintotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of machine L x W x H: 1,55 x 1,23 x 1,80 mAccessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 €: 1267.62 €: 800 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 810 mm: 5 - 25 m/min: 0.74 kW: 10 kVA kW: 3540 mm: 2080 mm: 2100 mm: 2900 kg: 980 mm: 350 kg: 355 x 50 x 127 mm: 0,001 mm: 500 - 1.800 U/min: 3,75 kW: 1.1 kW10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted ...
: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 €: 1660.74 €: 1015 mm: 600 mm: 1000 x 400 mm: 1000 x 400 mm: 670 kg: 1100 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 450 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2.000 1/min: 5,5 kW: 1.5 kW: 1.1 kW: 1.1 kW: 3630 mm: 2682 mm: 2200 mm: 4400 x 2300 x 2400 mm: 4800 kg: 423 kg: 670 kg: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatoroil mist collectorautom. dressing attachment table mounted with compensationfully enclosed splash guard protection of working area1 grinding wheel2 grindi ...
novo
: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 €: 1581.36 €: 810 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 450 mm: 0 - 675 mm/min: 480 mm: 500 - 2200 1/min: 3,75 (optional 5,5 / 7,5) kW: 1.5 kW: 3250 mm: 3075 mm: 2250 mm: 2900 kg: 175 kg: 350 kg: 355 x 50 x 127 mm: 1,1 kWFully enclosed splash guard10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listautomatic vertical feedservo drive for grinding wheel feed and table cross feedheavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearingshardened and gr ...
BAHMÜLLER - ISA 12 Stock number 1039-9288 Machine Type: Internal Grinding Machine Country of origin Germany Additional information - New control system (July 2015) Technical details Inner diameter min / max: 10 / 250 mm Grinding depth 400 mm Outer diameter max. 380 mm Swing diameter 390 mm Table: Table travel max. 550 mm Table stroke min. 2 mm Rapid traverse 10 m/min Table speed -infinitely variable- 0 - 10 m/min Coarse adjustment 18 mm Fine adjustment 4 mm max. workpiece weight 100 kg Workpiece spindle: Spindle Head B 6 DIN 55021 Spindle speeds - infinitely variable 15 - 1,500 rpm Swivel angle max. +/- 30 degrees Spindle bore 50 mm Drive power 2 kW Internal grinding: Rapid traverse 0 - 250 mm/min Stroke 70 mm Drive power 3 kW Space requirement approx. 3.0 x 3.0 x 3.2 m Accessories Documentation Fibaron Extraction System Paper Belt Filter Polo Fire extinguishing system ...
GREIF - DHL K-0 Offer details Stock number 1039-9256 Machine Type: Steel Grinding Machine Manufacturer: GREIF Type DHL K-0 Year of manufacture 1997 Control Storage location D-59302 Oelde Country of origin Germany Delivery time by arrangement Freight base from location Additional information Steel grinding machine GREIF - DHL K-0 Technical details Speed 3,000 rpm Grinding wheel diameter 150 mm Table size 380 x 220 mm T-slots 1x Connection 3~220 / 380 V Total power requirement 0.37 kW Machine weight approx. approx. 150 kg Space requirement approx. 0.7 x 0.6 x 1.25 m Auction-ID: A7-49608-13
Chevalier FSG-618M manual surface grinding machine with magnetic chuck/table and coolant system visible. Used condition, suitable for precision grinding work after inspection. Auction-ID: A1-49190-46
Conventional manual surface grinding machine with vertical column, magnetic table and handwheels. Used workshop grinder for flat grinding operations. Auction-ID: A1-49190-53
work table 330x150 mm, including cooling unit, SCHNEIDER electrics Auction-ID: A1-48552-32
drilling capacity Ø3~Ø32mm, x-travel 150 mm, y-travel 140 mm, angle adjustment 40º~180º, tilting angle of the machining head 0º~20º, including various tools and unused grinding wheels Auction-ID: A1-48552-145
including coaster, delivered in original packaging Auction-ID: A1-48552-54
3 collets: Ø4, Ø6, Ø8 mm, Grinding wheel ×1, Twist drill grinding attachment ×1, End milling grinding attachment ×1, Lathe tool grinding attachment ×1, delivered in original box Auction-ID: A1-48552-112
diameter Ø 2 mm - Ø 13 mm, adjustable angle 90° and 135°, grinding speed 5300 rpm, grinding wheel CBN 200, motor 180W, voltage 230V/50HZ, delivered in original box Auction-ID: A1-48552-64
590 € 
