Number of spindles: 5 St.
Working width: 230 mm
Working
height: 120 mm
Length of the planing table: 2000 mm
Feed
speed: 5-24 m/min.
Weinig Profimat 26 S Four-Sided
Planer
..
Summary:
- 5 spindles (bottom, right, left, top,
bottom)
- Common control of the right spindle (axial), top spindle
(axial),
and glass bead discharge.
- Working width (with a
125 mm tool circle) 20 - 230 mm
- Working height (with a 125 mm
tool circle) 8 - 120 mm
Detailed description:
1.
SPINDLE
..
- First lower horizontal spindle
- Motor with
brake 5.5 kW
- Diameter 40 mm
- Speed 6,000 rpm
- Tool
circle 125 - 145 mm
- Axial travel 5 mm
- Rebating
device
- Hardened table insert in front of the 1st lower
spindle
2. SPINDLE
..
- First right vertical
spindle
- Motor with brake 7.5 kW
Shared motor with left
vertical spindle
- Diameter 40 mm
- Speed 6,000 rpm
- Tool
circle 15 mm below table level 100 - 200 mm
- Tool circle 40 mm
below table level 100 - 180 mm
- Max. tool diameter behind stop
level 180 mm
- Max. groove depth 35 mm
- Axial travel 40
mm
- Right spindle pneumatically controlled axially (40 mm) via
selector switch,
max. saw blade diameter 180 mm
- Insertion
segment 125 mm
3. SPINDLE
..
- First left vertical
spindle
- Shared motor with 1st right vertical spindle
-
Diameter 40 mm
- Speed 6,000 rpm
- Tool swing circle 15 mm
below table level 100 - 200 mm
- Tool swing circle 40 mm below
table level 100 - 180 mm
- Max. Tool diameter behind stop plane
180 mm
-Maximum groove depth 35 mm
-Axially travel 40
mm
-Insert segment 125 mm
4. SPINDLE
..
-First
upper horizontal spindle
-Motor with brake 7.5 kW
-Diameter 40
mm
-Speed 6,000 rpm
-Tool swing circle 112 - 200
mm
-Maximum groove depth 35 mm
-Axially travel 40
mm
-Upper horizontal spindle pneumatically controlled axially (40
mm)
via selector switch, Max. saw diameter 200 mm
-Split
pressure shoe in front of upper spindle, adjustable to the
tool
swing circle and pivoting away from the tool, spring-loaded.
-
Pneumatically adjustable up/down glazing bead discharge to the upper
spindle
5. SPINDLE
..
- Second lower horizontal
spindle
- Motor with brake 4.0 kW
- Diameter 40 mm
- Speed
6,000 rpm
- Tooling circle 112 - 200 mm
- Maximum groove depth
15 mm
All groove spindles dynamically balanced for high
concentricity
Common control of the right spindle (axial),
upper spindle (axial)
and glazing bead discharge
FEED
SYSTEM
..
- Mechanical feed, infinitely variable 5 - 24 m/min.
With brake – 2.2 kW
-Feed roller in front of the first lower
tool, pneumatically
controlled up-down
-Durofer pointed tooth
rollers (Weinig patent) with depth limiter
and
self-cleaning
-Adjustment travel of the feed rollers
relative to the left spindle, axial 35 mm
MACHINE ELECTRICAL
TECHNOLOGY
..
-Operating voltage 400 volts (voltage range
380–420 volts), 50 Hz
-Electrical design according to DIN VDE
0113, electrical equipment of
industrial machines EN 60204, IEC
204-1
Other electrical regulations are not
considered.
MACHINE STANDS, TABLES, STOPS
..
- 2
m long jointer table (incl. jointing guide)
- Stops on the right
spindle recessed by 35 mm for
square strip cutting
- Manual
Waxilit pump for table resin removal
PRESSURE ELEMENTS AND
GUIDES
..
- Spring-loaded side pressure roller on the infeed
table
Spring-loaded top pressure rollers
MACHINE
OPERATION
..
- Both axes of all spindles - except the first
lower spindle -
are equipped with mechanical digital
displays.
- Pressure guard in front of and discharge after
the upper spindle
with mechanical digital display
- DigiSet
(digital dual display) for left and upper spindles
(Set tool
radius - read wood dimension)
- Lubrication points for axial
spindle adjustment
- Central position of lubrication points on the
front of the machine
SAFETY AND SOUND INSULATION
..
-
Full safety enclosure. Easily hinged safety hood with
window
covers the entire working area (feed and spindles) and
protects against
mechanical hazards. When the safety hood is
raised, the spindles and feed
are automatically switched off.
Machine with CE marking.
Machine without machining
tools.
Extraction port diameter: 5 x 140
mm
(Technical data according to the manufacturer - without
guarantee!)
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
