sottocategorie
(terzo livello di categoria)
Fabbricante:
(Categoria: 109)
turning diameter: n mmturning length: n mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Presetter Tool DMG Mori Uno 20-40 BJ 2016
CONTROLS conventional PRESS FORCES total force (nominal): 110 toSLIDE (MECHAN. PRESS) slide adjustment: 89 mm stroke min.: 16 mm stroke max.: 75 mm stroke rate (min.): 100 /min stroke rate (max.): 850 /minTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 375 mmOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 260 mm sheet thickness max.: 1.5 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 3320 mm space requirements -front/back-: 2250 mm total height: 3930 mm total weight approx.: 24600 kgATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder Strip Feed UnitManufacturer: Bruderer Type: BBV 320/200AccessoriesKohler decoiler 18 260/19-1000.2 (YoM 1987)
CONTROLS PLC SIEMENS SIMATIC HMI PRESS FORCES total force (nominal): 250 toPRESS TABLE table surface (left-right): 1950 mm table surface (front-back): 1000 mmSLIDE table surface (left-right): 1950 mm table surface (front-back): 800 mm stroke: 30 mmSLIDE (MECHAN. PRESS) slide adjustment: 100 mm variable speed: yes stroke rate (min.): 80 /min stroke rate (max.): 400 /min main drive power: 51 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 550 mmSTRIP-FEEDER feeder type: roll feeder DIMENSIONS / WEIGHTS total weight approx.: 48000 kgATTACHMENTS (PRESSES) decoiler: yes leveller unit: yes strip feeder: yes Strip Feed UnitManufacturer: Kohler Maschinenbau Type: KRS 18.260/19-2000.2H-BF1Serial number: 40 871Year of manufacture: 2006Connected load: 15.5 kWDecoilerManufacturer: Kohler Maschinenbau GmbHModel: 18 260 ...
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end-face drive -Type: MS3 -Front dimension: Ø 32 mm -Recording: MK4 -Overall dimensions: Ø 45 x 195 mm -Weight: 0.9 kg
Tool holder, milling holder, milling tool, long milling arbor, attachment holder, cutter head holder, cutter head holder -Milling chuck: SK40 chuck, 3 pieces -Type: 40x16x63 TGL 30 1359 -Hole: Ø 16 mm -Dimensions: 203/60/55 mm -Weight: 1.2 kg
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck -Manufacturer: Bilz, Thread cutting chuck, quick-change thread cutting chuck, 3 pieces -Type: WFLK 115 B TR 28X2 -Submission/Price: complete -Transport dimensions: 120/40/H135 mm -Weight: 1.9 kg
Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeves Ø28 mm 9 pieces -Recording: 5x MK2 / 4x MK1 -Submission/Price: complete -Transport dimensions: 200/90/H120 mm -Total weight: 3.6 kg
Misura di larghezza/lunghezza/altezza 1600/ 1800/ 1000 mm Dimensioni: Larghezza/ Lunghezza/ Altezza 2450/ 2940/ 3800 mm Peso massimo del pezzo 3500 kg Misuratore peso 8500 kg Velocità di scorrimento 0 - 5 mm/s Funzionamento di configurazione 0 - 70 mm/s Funzionamento della misurazione in serie Asse max: 300 mm/s Vettore max. 425 mm/s Versione software Calybso 2023/ Service Pack 2 --- versione 7.6.08 Varie sonde Trasduttore
Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...
A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...
turning diameter: 580 mmturning length: 1500 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: n mmspindle passage: 20 mmturning length: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
brinell hardness: - rockwell hardness: - throat: - mmweight of the machine ca.: - tdimensions of the machine ca.: - msclerometerDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: ISO 50 quill stroke: 150 mmturning speed range: 40 - 3600 U/mindrive motor: 22/33 kWswival range +/-: 23 °weight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,811,2 mAssemblies for RAMBAUDI Rammatic 1201:1. milling head SK 50 / 22 kw / 40 - 3,600 min-1and:3. 30-fold tool magazine COSTELLI 7. measuring system / glass scale Heidenhain LS 706 C / ML 2840 mm8. measuring system / glass scale Heidenhain LS 706 C / ML 1140 mm 9. measuring system / glass scale Heidenhain LS 706 C / ML 1440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
balancing body min/max.: 0,1 - 1 kgbalancing body diameter w/o machining unit: 300 mmbalancing body diameter with machining unit: - total power requirement: 0,7 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 10,61,2 mNo. 0304Vertical balancing machine SCHENCK Z 35 EWorking range: max. test piece 300Control: Test piece weight 100 g - 1 kgDrive: .7The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: 1/4 bis 3 / 75 mmthreading length: ? mmthread pitch: ? mmturning speeds: 33 U/mintotal power requirement: 1 kWvoltage: 230 Vweight of the machine ca.: 0,074 tdimensions of the machine ca.: 1,20,81 m2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: Spannzangenaufnahme collet diameter: unbekannt turning speed range: 1,3 x der Antriebsdrehzah U/min: 165 mmdistance spindle - column: ? mmweight of the machine ca.: 28 kgdimensions of the machine ca.: 350350200 mmShipping weight: 35 kgPacking: ( ca. 400400400 ) mmNo. 55321 used Milling head BoKö / BOHNER & KÖHLE, type UFK 14 PInner taper of the milling spindle: Collet holderCollet diameter: unknownSpeed range: 1.3 x the drive speedBolt circle 165 mmWeight approx. 35 kgSize approx. 35 x 35 x 20 cmShipping weight approx. 35 kgShipping dimensions approx. 40 x 40 x 40 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
inner taper of milling spindel: SK 40 collet diameter: 0,5-25 turning speed range: 1900 - 6000 U/mindrive motor: 0,55 kWtotal power requirement: 0,55 kWweight of the machine ca.: 50 kgdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool taper: 54 x SK 50 worktool system: 27 x System TUL Kelch Packing: 1200800350 mmShipping weight: ? kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 630 mmtable load: 1 ttable height: 170 mmtotal power requirement: 0 kWweight of the machine ca.: 330 kgdimensions of the machine ca.: 900750170 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 160 mmtotal power requirement: 0 kWShipping weight: ca. 700 kgPacking: - mmVarious chucks, jaws, tensioners etc - see photosThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 6 diameter: 160 mmturning length: ? mmtotal power requirement: 0 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,20,81 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 665 mmy-travel: 465 mmz-travel: 350 mmweight of the machine ca.: 0,65 tdimensions of the machine ca.: 1,11,12,2 mNo. 02983D measuring machine DEA OMICRON A 001Working area: 665 x 465 x 350TROLL - microprocessor systemL x W x H 1100 x 1100 x 2200 mmWeight approx. 620 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel diameter: ? mmpower requirement: 1 kWtotal power requirement: 1 kWweight of the machine ca.: ? tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeve Ø28 mm -Type: F28X2X75 -Recording: MK2 -Quantity: 2x adjusting sleeves available -Price: per piece -Dimensions: Ø 40 x 170 mm -Total weight: 0.6 kg/pc.
A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible.
Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg
