Number of machnines: -
Loading meters, approx.: -
Total
weight, approx.: -
Ruchsr Assembly line consisting
of:
Item 1.0 / 0610005
RU-CBM 4000 work table
with
running rail extended by 500mm for additional assembly
an aluminum
holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD
with RU-SH
special screwdriver, support table
Length 4000 mm, width 1400 mm,
inclination of the working platform
manually adjustable. Holder
for fitting scissors or fitting punch.
16 pieces of swiveling
counter-holders for hanging the wings, completely
pneumatic
Foldable for unhindered movement of the wings on
the table surface.
Device for scanning the sash fitting length for
constant and
variable/central gear seat for already drilled wings,
colored
Dimension recognition of the fittings.
RU-SH, special
screwdriver with pneumatic depth switch on carriage
mounted,
safety control, pneumatic height adjustment,
Screw feeder with
automatic shutdown of the filling container
(Manual insertion for
a second screw length on the special screwdriver upon
request).
RA-8, turret stop for 8 screw levels mounted
on the carriage.
RA-4, turret stop for 4 different wing
widths
Swivel table mounted.
Pneumatic wing measurement
sensing. operated, scanning range up to 2500mm
simultaneous
clamping of the scanning.
PSF - Pneumatic tensioning device
for sashes.
Working height adjustable from 900 - 1000
mm.
Support table covered with felt. Running rail extended to the
left by 800 mm.
Item 1.1 / 5035-1
Pneumatic swivel device
of the work surface with foot valve
Item 1.2 /
0500000
Holder matched to customer punch/scissors.
For
mounting a hardware punch provided by the customer or
Fitting
shears (third-party manufacturer) on the sash assembly
table.
Please specify make when ordering!
Item 1.3 /
5597-7
Driving device for RU-CBM on semicircular rails.
The
castors are on the left and right of the base frame
of the table
mounted.
Item 1.4 / 6354-6
3 double meters of
semicircular rails 30 x 10 mm.
Item 1.5 /
0730000
RU-SBL3000/40 free-standing fitting bearing,
Length
3100 mm, depth 1250 mm, height 2200 mm,
Stand frame on the front
without supports,
40 compartments, divided into 10 compartments in
a row by dividers
and a continuous shelf at the
top,
Compartment size: width 280 mm, height 150 mm.
Item
2.0 / 10603200
RU-CSA-SMB aluminum holder screwing machine
with automatic
Screw feeding and manual feeding of the aluminum
holders from one
traveling box with pneumatic positioning
device,
Screwdriver with depth cut-off with 4-fold turret
stop.
Pneumatic adjustment device in the y direction against 2
pieces 6-fold
Revolver attacks. Feed container for manual feeding
of rotary holders
or clip holder in square shape 18.5 x
18.5.
The holder is manually pushed into a channel in the box and
with
positioned in front of the screwdriver mouthpiece using a
pneumatically
operated slide.
Profile depth max. 150 mm,
screw spacing in the y direction max. 120 mm.
Item 3.0 /
614-601
RU-S48-A6-350 column slewing crane
for chain hoist,
with 6 m aluminum boom
Version with column, smooth-running
boom
and sliding chassis for swivel and trolley
travel
manually by pulling and pushing the load.
Projection 6
m
Construction height 4,461 m
Lower edge of boom 3.722 m (top
edge of boom 3.9 m)
Swivel range max. 270°
Painting of the
steel construction in RAL 7035
The base plate is attached to the
on-site hall floor
At least 250 mm thick.
Designed, of course,
according to the valid STANDARD EN 13155
Warranty 12 months
excluding wearing parts
Documentation 1-fold digital in German
including CE declaration of conformity
Item 4.0 /
10229018
Vacuum lifter with integrated electric chain hoist 90° /
200 kg
for vertical and horizontal transport of flat, sealed glass
panes.
Vacuum generation with pneumatic ejector
Push-off
device for quickly releasing the plates and releasing the
load
only by double actuation (2 buttons)
Safety vacuum
storage including check valve is required by law.
Audible safety
warning device and vacuum pressure gauge
with red/green
area
Energy saving device for vacuum generation and stroke safety
circuit
Pneumatic swivel unit with swivel range 90°
Load
capacity: 0-200 kg
Lifting speed: 0-10m/min continuously
using
Frequency converter
Lifting height: approx.
1.8m
Operating voltage: 1x230V/50Hz
Operating pressure: at
least 6-7 bar of filtered compressed air
Air consumption: approx.
1NI/sec.
Weight: approx. 75 kg
Painted in RAL 1018 zinc
yellow
Recording with a longitudinal beam and 4 pieces
Suction
plates D=290 mm
Adjustment range, external dimensions of the
suction plate
Vertical 600-1000 mm
Horizontally 800-1000
mm
Comfort control
The comfort control includes stepless
raising and lowering
through a frequency converter (required for
gentle hanging up),
All commands for the hoist and the vacuum
lifter are in one
common control unit
- Special handling
switch - housed.
This makes it easier to operate the system and
manage it
Load possible in one-hand operation.
Assembly -
slewing crane and instruction on wing assembly table with aluminum
screw machine
Price on request!
Packaging
Price
on request!
transport
Price on
request!
(Technical description according to manufacturer -
no guarantee!)
The data for this ad was
created with ModulMWS - the software solution of LogoTech
oHG.
Germania
ab Werk 
