macchine per lavorazione dei metalli / fresatrici / Fresatrici orizzontali
Fabbricante: DMG MORI
Modello:NHX 5000
Tipo di macchina: Horizontal Console Milling Machines
Numero di articolo: 169913403
Quantità: 1
Data: 25.07.2026
Prezzo:
Seller-item-No.:064145
| General | |
| Horizontal machining center; Control: Control F31iB with CELOS | |
| Characteristics | |
| Speed max. | -20000 rpm |
| Dimensions (L x W x H) | 3,08 x 4,79 x 2,86 m |
| Max. tool length | 550 mm |
| Spindle taper | BT 40 |
| Tool Magazine with | 60 Positions |
| Rapid feed X / Y / Z | 60/60/60 m/min |
| Movement X / Y / Z | 730/730/880 mm |
| Palett changer with | 2 Pallet |
| Max. work piece height | 1000 mm |
| Max. work piece diameter | 800 mm |
| Maximum load (table centre) | 500 Kg |
| Swivelling range | 360x1 degree |
| Table size | 500x500 mm |
| Drive power (40% DC) | 26 kW |
| Drive power (100% DC) | 18,5 kW |
| Weight approx. | 12000 Kg |
| CELOS - ERGOline Touch | CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p |
| High-speed spindle 20,000 min-1, 37/ 26/ 18.5 kW | High-Speed Spindle 20,000 min-1, 37/26/18.5 kW Motor spindle speedMASTER® Spindle speed: 35 - 20,000 min-1 Output: 37/26/18.5 kW (50/34.7/24.7 HP) (15%ED/30min/cont) Torque: 221/107/86.8 Nm (163/78.92/64.02 ft·lbf) (10%ED/15min/cont) |
| Spindle Taper 7/24 Taper #40 (two-face
contact)/ Grip MAS |
Spindle Taper 7/24 Taper #40 (Two-face
contact)/Grip MAS |
| Preparation for Center Through-spindle coolant system | Center Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life. |
| Retention Knob: Special (Center-Through) (7/24 Taper #40) | Retention Knob: Special (Center-Through) (7/24 Taper #40) The spindle collet applicable to the special (center-through) retention knob is installed. Tool retention knob is not included. The through-spindle coolant specification requires a dedicated ret |
| Full 4th axis rotary table (STD) | Full Rotary B-Axis Specifications (Standard Specification) Minimum pallet indexing angle is 0.001 °. It is applicable to the B-axis index machining and simultaneous 4-axis machining. The High torque DD (direct drive) motor enables high-speed and high-p |
| Pressure setting for Hydraulic Fixture Interface: 7MPa (STD) | Pressure Setting for Auto-Coupler Specification: 7 MPa (1,015 psi) The hydraulic pressure setting for fixture is 7 MPa (1,015 psi). When changing the pressure setting, please order it as a special specification. |
| Tool storage capacity 60 tools (STD) | Tool Storage Capacity 60 Tools (Standard) Ring type magazine Tool capacity: 60 tools (including one tool mounted in the spindle) Technical random address type Max. tool diameter: - With adjacent tools: f70 mm (dia.2.76 inch.) - Without adjacent tools: f17 |
| Chip conveyor outside machine (rear discharge, drum filter type) (STD) | External Chip Conveyor (Rear Discharge, Drum Filter Type) (Standard Specification) The scraper type chip conveyor efficiently discharges chips in the machine into the container (order separately) at the rear of the machine. The drum filter rotates durin |
| Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) | Through-Spindle Coolant System I/F (8 Steps Pressure) (Separate Type) I/F for mounting the high-pressure coolant system (separate type). Supplies the high-pressure coolant to the tool tip from the center of the spindle through the retention knob and the |
| Mist collector Interface (duct only, dia. 200 mm ) | Mist Collector Interface (Duct Only, Dia 200 mm (7.874 in) ) Interface for attaching a mist collector to collect dust and particles and to condense oil mist and smoke generated during the machining process. Includes only the duct outlet from the machine b |
| Oil skimmer (STD) | Oil Skimmer It removes oil that floats on the surface of coolant in the coolant tank to maintain the coolant quality and inhibit the coolant deterioration. This can reduce the coolant disposal cost. The screw type oil skimmer is adopted, which separate |
| Sludge collecting function inside coolant tank (STD) | Sludge Collecting Function Inside Coolant Tank (Standard Specification) The filter (Filster made by Industria) is installed to collect sludge in the coolant tank. In addition, for improvement of sludge collecting efficiency, a nozzle for stirring coolant |
| In-machine measuring system (table) touch sensor (Magnescale) + tool setter function (tool length + diameter) | In-Machine Measurement System (Table) Touch Sensor (Magnescale) + Tool Setter Function (Tool Length + Tool Diameter) The Magnescale touch sensor mounted on the table allows the tool length and diameter measurements and the tool breakage detection. Durin |
| Automatic door (setup station) | Automatic Door (Setup Station Side) The pneumatically-driven setup station door is automatically opened/closed. This can reduce the operator fatigue and setup time. The door is opened/closed using the door open/close buttons of the setup station operat |
| Interface for Robot (EtherNet/IP), Need to select EtherNet/IP Interface | Robot I/F (EtherNet/IP), Separate EtherNet/IP I/F Required The interface signals for mounting robots are made available. The signals are exchanged with the robots using the EtherNet/IP communication protocol. The use of the robots allows the automatic loa |
| Setting Unit mm | Setting Unit, MM The unit to be used for the screen display and program commands is set to millimeter (mm). Turning: MM specification for the turret Horizontal machining center: MM specification for the tapped pallet |
| Islands, open pockets | Islands, open pockets Islands - Programming process can be greatly simplified because minimum input operation is required even for the complex machining. Open pockets Definition of open pockets eliminates tool paths with no machining allowance, |
| High-speed canned cycle | High-speed canned cycle High-speed cutting can be specified with one line of program. This function enables the user to reduce programming time by adding a new cycle that can create a high-speed, time saving complicated programs. |
| Screen display English | Screen display English Language on MAPPS Screen: English Language on MAPPS Warning Screen: English Language on NC Screen: English Language on PC Screen: English |
| 2018 | DMG MORI | NHX 6300 | 415150 EUR | [Oct 2021] |
