: neu : ca. 4 Monate ab Auftragse : Italien : 26500 €: 506.15 €: 100 to: horizontal verschiebbar : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1770 kgHORIZONTAL MOVABLE CYLINDER 600 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 28000 €: 534.8 €: 70 to: fix : 1050 mm: 500 mm: 700 mm: 900 mm: 29 mm/s: 10 mm/s: 5 mm/s: 800x600 mm: 700x350 mm: 1700 mm: 1000 mm: 2300 mm: 1400 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardALTERN ...
: neu : ca. 4 Monate ab Auftragse : Italien : 25200 €: 481.32 €: 100 to: fix : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1300 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: fix : 1520 mm: 300 mm: 1520 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 10 mm: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2450 mm: 3270 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel and foot pedalTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 3800 €: 20 to: fix : 825 mm: 520 mm: 1150 mm: 500 mm: 1800 (PSS: 1950) mmThe table can be lifted manuallyHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 20 TL: 1 speed 4 mm/s, single-hand control with lever € 3.800,00 PSS 20 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 4.500,00 PSS 20 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 5.100,00 PSS 20: same as PSS 20 NC but with stroke 500 mm € 5.200,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 14400 €: 276.48 €: 70 to: horizontal verschiebbar : 350 mm: 900 mm: 1050 mm: max. 9 mm/s: 2 kW: 1950 mm: 1000 mm: 2250 mm: 1220 kg: 650 mmThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 7308 : prompt, Zwischenverkauf v : Italien : 2400 €: 1 : 10 a: fix : 150 mm: 850 mm: 520 mm: 170 kg Con pompa manuale manuale utente I dati per questo annuncio sono stati creati con ModulMWS - la soluzione software di LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 49500 €: 945.45 €: 150 to: fix : 835 mm: 500 mm: 700 mm: 1050 mm: 20 mm/s: 10 mm/s: 3 mm/s: 1000x700 mm: 1000x400 mm: 2200 mm: 1000 mm: 2700 mm: 4100 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 30900 €: 590.19 €: 200 to: horizontal verschiebbar : 300 mm: 1900 mm: 320x210 mm: 5 mm/s: 20 mm/s: 2460 mm: 1600 mm: 2700 mm: 4800 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo shows mod. HDK 1570/150)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 €: 195.84 €: 150 to: fix : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2050 mm: 1000 mm: 2270 mm: 1870 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 11500 €: 220.8 €: 150 to: fix : 300 mm: 1570 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2500 mm: 1000 mm: 2270 mm: 2100 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 €: 982.8 €: 150 to: fix : 1250 mm: 500 mm: 700 mm: 1500 mm: 20 mm/s: 10 mm/s: 3 mm/s: 1200x700 mm: 1250x400 mm: 2400 mm: 1200 mm: 2800 mm: 5200 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...
pressure: 100 tstroke: 300 mmtable surface area: 500 x 1520 mmcolumn travel between the guideways: 1520 mmdayligth: 680 mmpressure: max. 244 barweight of tools max.: 270 kgajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lvoltage: 400 Vtotal power requirement: 7.5 kWweight of the machine ca.: 2700 kgdimensions of the machine ca.: 2630 x 1000 x 2350 mm current new price approx. 18.000 euros special price on request according to previous owner rarely in useEquipment:- robust electro-hydraulic workshop/bending press left right guided- with fixed working cylinder- Pressing depth adjustable by cams- Height-adjustable work table- 2x locking bolts for table fixation- 3x directional control valve supply-empty-return- Stepless adjustment of working pressure- 1x freely movable 2-hand operation- Original operating instructionsThe data for this ad was crea ...
pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 820 x 300 mmdayligth: 900 mmliter capacity: 6,5 lfeed down: 6,1 mm/secfeed up: 10 mm/secMotor output: 2,2 kWweight of the machine ca.: 0,675 tdimensions of the machine ca.: 1,46 x 0,85 x 2,1 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 4,8 mm/secfeed up: 7,5 mm/secweight of the machine ca.: 0,9 tdimensions: 1550 x 900 x 2450 mmHigh-quality hydraulic press can be operated manually or by motor.Cylinders can be moved sideways.Safety valve at cylinder end position.CE markedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 380 mmtable surface area: Arbeitsbreite 1100 mmpressure: 258 baroil volume: 46 dm³ajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 970 kgInner diameter of the cylinder [mm]: 220Piston rod diameter [mm]: 90Diameter piston crown [mm]: 120- Movable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision workThe 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Over and beyondit has a pressure regulation, 2 speeds, a joystick anda hand pump for precision pressing.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 350 mmtable surface area: Arbeitsbreite 750 x 260 mmpressure: 221 baroil volume: 37 dm³work speed: max. 9,8 mm/secreturn speed: 14 mm/sectotal power requirement: 3 kWweight of the machine ca.: 385 kgInner diameter of the cylinder [mm]: 130Piston rod diameter [mm]: 55Diameter piston head [mm]: 80- Integrated pressure gauge- Pressure regulator- Hydraulic unit with variable speeds- Working table adjustable in height- Joystick to control piston and speedThe workshop press (30T) has a fixed cylinder and a highadjustable work table (motorized). Equipped with pressure regulation,Pressure gauge, variable speed and a joystick to move the piston up and downto move off. With this joystick you can also control the speedadjust, making this motorized hydraulic press perfect forprecision work is suitable.The data for this ad was created with ModulMWS - the software solution of Lo ...
pressure: 100 tstroke: 380 mmtable surface area: 1740 x 996 mmpressure: 258 barajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/secdayligth: 700 mmtable height: 720 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1685 kg- Manually movable portal- Movable cylinder manually (left - right)- Cylinder extension up to the table- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Joystick to move the piston up / down- Hand pump for precision workThese straightening presses are equipped with a movable cylinder (on the side) and aMovable frame (longitudinal-running) equipped to allow easy access to allallow points of the surface. The design of this portal pressmakes it possible to put heavy material on the table with a crane and thatSlide the portal over the material at the beginning of the pressing process.The quality of these hydraulic s ...
pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressione: 20 tcorsa: 150 mmluce diurna: 700 mmDimensioni complessive: 670x870x1900 mmpeso della macchina ca.: 200 kgAttrezzature domestiche:- Stabile costruzione saldata - manualmente tramite leva manuale - Manometro tramite manometro - Marchio CE
: 60 tostroke: 400 mmdayligth: 900 mmHeads: 150x95 mmfeed up: 5,6 mm/secfeed down: 9,4 mm/secweight of the machine ca.: 700 kgtotal power requirement: 4 kWOverall size: 1460x850x2400 mmFurther information:stable welded constructionPrinting cylinder adjustableOperation electrically via shift lever / manually via hand leverPressure display by manometerHeight of material supports adjustable by cylinderCE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressione: 75 t Corsa: 250 mmLuce diurna longitudinale/laterale: 800 x 215 mmLuce diurna: 170 - 885 mmPressione di esercizio: 7,5 - 8,5 barPeso della macchina ca.: 0,45 tDimensioni: 1,2 x 0,8 x 2,1 mmPressada officina idraulica/pneumatica Il cilindro può essere spostato lateralmentea pedalepneumatico Verricello per la regolazionedell'altezza del tavolo 2 pz. blocchidi pressatura Marcatura CE
pressure: 60 tstroke: 400 mmtable surface area: 800 x 500 mmfeed down: 4,03 mm/secfeed up: 5,82 mm/seccolumn daylight: 820 mmoil pressure max. in the work cylinder: 400 baroil volume: 26 lvoltage: 400 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 0,9 x 2,1 m• unused workshop press,• manual and hydraulical operation,• Pressure cylinder moveable horizontally,• Working table hydraulical adjustable,• Cylinder Ø 150 mm, piston base Ø 85 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 400 mmdaylight longitudinal/sideways: 720 x 295 mmdayligth: 900 mmliter capacity: 6,0 lfeed down: 7,5 mm/secfeed up: 12,5 mm/secMotor output: 3,0 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,35 x 0,85 x 2,2 mHigh-quality, hydraulic press can be used either by hand or by motoroperate.Cylinders can be moved sideways.Safety valve at cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressione: 25 tcorsa: mmsuperficie tavola: mmpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mMarca: WPCapacità: 25 TDistanza tra le colonne: 760 mmDistanza tra cilindro e tavola: 950 mm
