3 strati impianti di soffiatura pellicole

pressione di alimentazione: . capacità del liquido di raffreddamento della barra: . lIntervallo di espansione: . mm

pressure: 100 tchamfer lenght: 3000 mmdistance between columns: 2700 mmControl: AMADA AMNC II-PC throat: 415 mmstroke: 200 mmdayligth: 500 mmadjustment of the rear stops: 600 mmtable width: 60 mmnumber of controlled axis: 7 ajustment speed: 200 mm/secbending speed: 20 mm/sectotal power requirement: 5,3 kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mIncludes:-Matrix holder for 1V matrices, pluggable, total height with holder: 140mm-Status indicator light-5-axis backgauge with stop sensor systemFolding robot: ASTRO-100 NTIncludes:-Standard gripper-Reposition gripper on the upper press beam-Regripping support for large workpieces - pneumatically drivenTechnical data see PDF attachment.Handling robot: ASTRO-MP20Includes:-Loading table with spreading magnets-Vacuum gripper Medium and Large-Combi gripper (suction/gripping) for vertical loading-Device for vertical loading of ...

Rated capacity: 2000 Wattwork piece lenght: 1075 nmTemperature range: 15 - 40 °Cdimensions: 550 x 1100 x 1200 mmtotal wight: 200 kgMobile laser welder with PenWelderhand-held PenWelder:- pulsed laser operation- average laser power up to max 500 W- Pulse duration 1 to 200 ms depending on application- peak pulse power 1000, 1500 or 2000 W- Siemens control- Integrated protective gas supply- Exchangeable -, adaptable process module (contact tips)- Pilot laser from laser source- Laser parameters via control panelLaser light cable LLK-A / BF 10:- Diameter(µ): 300 / 400 / 600- Length(m): 4 / 6 / 10 / 20Unit little usedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Asse x: 700 mmAsse Y: 1.000 mmAsse Z: 500 mmCarico massimo della tavola: 900 kgpotenza totale richiesta: kWpeso della macchina ca.: tdimensioni della macchina ca.: mMacchina di misura a coordinate 3D- PC con software, varie sonde- Renishaw PH10MQSoftware: PC-DMIS Pro 3.7 Maintenance Release 2

x-travel: 2100 mmy-travel: 520 mmz-travel: 500 mmControl: Heidenhain type: TNC 426 table surface area: 2800x520 mmworkpiece weight: 1500 kgdist. milling spindle - table surface: 200-700 mmspindle turning speed range: 12-15000 U/minspindle diameter: 90 mmspindle taper ISO: 40 Tool changer: 30 Posspindle drive: 22 kWtotal power requirement: 50 KVAweight of the machine ca.: 11 tdimensions of the machine ca.: 5.500 x 2400 x 3000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro di tornitura sul letto: 920 mmdadametro di rotazione su supporto scorrevole: 600 mmcopertura di rotazione: 12000 mm capacità di carico: 20 tonnellate esamino di velocità di rotazione: 3,6 - 172 U/minvolt: 380 Vpotenza totale: 90 kWpeso della macchina ca.: tdimensioni della macchina ca.: m

corsa x: 980 mm corsa y: 1080 mm corsa z: 280 mm Controllo: dimensioni del tavolo: 1.125 x 1.700 mm altezza del tavolo: 800 mm diametro: 435 mm passo del mandrino: 16 x 5 mmpotenza totale richiesta: kWpeso della macchina ca.: 0,8 tdimensioni della macchina ca.: 2,08 x 1,98 x 2,0 mAccessori:- Stazione di cambio utensile- Sonda TS20- Sistema di bloccaggio

Asse X: 600 mmAsse Y: 300 mmAsse Z: 200 mmCarico massimo del tavolo: 25 kgpotenza totale richiesta: kWpeso della macchina ca.: 40 kgdimensioni della macchina ca.: mSistemadi misurazione della produzione 3D monitor da 15 pollici (montato su un carrello di trasporto)Come nuovo, usato solo 4-5 volte

total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m6-axis industrial robot YASKAWA MH502 CNC rotary tables1. rotary table 1 and rotary table 2limited Nmax=1.300 1/minReduction ratio I= 1:72Nmax: Reduction ratio and Nmax motor corresponds to 120°/sec on the tableMdnenn. Output = 828 NmMaximum centric loading weight = 15 kNCentering force from inside to outside clamping = 7,540 N @ 6 barCentering accuracy in the gripper = 0.05 mm [PA]Rotary field restriction depending on cable and hose situationProvided for ± 720° (provide for this in the robot controller)Motor: YASKAWA SGMRV-20ANA-YR11Milling spindle: AMTRU (CH), type Flexicut 250Gearbox: ZAE Hamburg, type: S100B-1300/65-HOX-72.0:1-3000Version: with Yaskawa servo axis + ZAE worm servo gearboxThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

prestazioni di filtrazione: . l/minlarghezza pile: . mmtemperatura: . C

cutting diameter: 280 mmcapacity 90 degrees: flat: 380 x 260 mmcapacity 90 degrees: square: 260 x 260 mmturning speed range:: 40 / 80 m/mindimensions of saw-band: 3440 x 27 x 0,9 mmengine output: 1,5 / 1,8 kWweight: 670 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine output: 375 kWcubic capacity: 12809 ccmdriven kilometers: 225000 kmallowable maximum weight: 18/56 Tgear box: automatic size of tire: 385/65R22,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: . mmwidth: . mmheight: . mmweight: . kgFahrbahrThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

corsa x: 1600 corsa a: 1300 mmz-corsa: 1450 mmControllo: Siemens 840C Caminome utensile: 100pos numero di velocità mandrino: 10-4000U/min cono utensile: Iso50 Asse A: -100/+10 asse c: 360.000 0potessere potenza totale: kWpeso della macchina ca.: tdimensioni della macchina ca.: m

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 20 taxial load -forward: 9 taxis load in the back: 9 tBrake system: size of tire: 550/45-22,5 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity: 1-16 mmturning length: 160 mmControl: Fanuc turning speeds: 100 - 12.000 U/minNumber of axles: 6 St.feed: 20 m/minbar length: 3 mtotal power requirement: 3,7 kWweight of the machine ca.: 3,40 tdimensions of the machine ca.: 6,37 x 1,10 x 1,95 m6 axes, 2 spindles:- Movable headstock: Z1, S1- 1 system of independent linear tool X1/Y1 (S3)- 1 independent pick-up spindle with a system of independent linear second tool:X2/Y2/Z2 (S2)- 1 system of independent tools in back machining: 3 tools1 x driven toolLoading magazine Bechler, integrated into the machine2-3 turning holders1 x cutter1 x drilling quillOperating hours: approx. 40500 hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

velocità di taglio: 15 - 90 m/minpotenza totale richiesta: 2,4 kWpeso della macchina ca.: 0,95 tdimensioni della macchina ca.: 2,15 x 1,5 x 1,65 m

peso:. kgtaper MK: .

x-travel: 3000 mmy-travel: 2500 mmz-travel: 1000 mmControl: Siemens type: 840 DFeed: 5-30.000 mm/minTable area: 2000x2170 mmtable load: 1500 Kg/m²T-slots: 22 H9distance between uprigths: 2500 mmspindle turning speed range: 6000 U/minspindle drive: 36 kWspindle taper: HSK 100Tool changer: 30 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 8x6,4x4,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diametro di taglio: 350 mm Lunghezza nastro sega: 5270 mm larghezza di taglio: 335 mm altezza tavola: 800 mmvelocità di taglio: 0-110 m/minpotenza totale richiesta: 16 A kWpeso della macchina ca.: 1,5 tdimensioni della macchina ca.: 2,2 + 2 RB x 3,5 x 1,9 mDispositivodell'acqua di raffreddamento Trasportatoredi trucioli Lamediv.

x-travel: 250 mmy-travel: 200 mmz-travel: 90 mmcontrol: 5D HSC 6000 A-axis: +/- 180 °b-axis: +25 -15 °spindle turning speed range: 40.000 U/mintool taper: HSK 25 E min./max workpiece dia.: 3 - 10 mmtool change unit: 7-fach total power requirement: 7 kWweight of the machine ca.: 0,85 tdimensions of the machine ca.: 0,78 x 1,85 x 1,165 mThe machine for dental use- suitable for metal, plastic, wood and zirconium blanks- 5 axes simultaneously- Milling spindle HFS 201 quick-change (has been overhauled)- High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts)- Additional tool change magazine with 14 places (linear pick-up system with collision protection)- Tool length scanning- Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code)- W.Loader workpiece changer for up to 30 blanks- Max. height of blanks: 25 mm- Extraction unit for effective di ...

turning dia. over bed: 3.520 mmturning diameter over slide: 3.000 mmturning diameter over slide: 2.440 mmturning length: 15.000 mmControl: Sinumerik 840 D SL turning speeds: 50 U/minworkpiece weight max.: 80.000 kgturning diameter: orig. 3500 / mod. 2400 mmaccuracy +/-: 0,01 °total power requirement: 110 kWweight of the machine ca.: 154,4 tdimensions of the machine ca.: 20,7 x 6,0 m- The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system.- In the course of the work, it became apparent that the two double-row cylindrical roller bearings had to bereworked.Thus, the entire bearing arrangement was modified and optimally adjusted.- In addition, control and safety-related points had to be modified.- Geometric acceptance report- Temp ...