Description: |
GRONEMEYER
used machine
Pos. 2 - supply to the cooling tunnel, single-strand, equipped with
cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in
stainless, Execution; complete with supports, railing brackets and
guides as well as drive motor block in, Hollow shaft version, make
SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;,
the conveyor system is equipped with a pneumatic stopper/slider
combination., This is how the rows are formed and pushed off., Item 3
– cooling tunnel, The system is based on a mat chain conveyor that
is guided through a cooling zone., Technical specifications, Conveyor
capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet
temperature approx.: 35 °C, Average room temperature approx.: 10 °C,
Cooling time approx.: 55 min, cooling belt, Usable chain width:
approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet
height: approx. 1,000 mm, Frame in stainless design with console for
the air cooler units and support for the insulating, enclosure; the
drive make SEW, type DRN®, 400/230 V, 50 Hz, IP 55, energy efficiency
class IE3, Refrigeration plant, Approx. 32 kW cooling capacity is
required to cool the products. The cold will with you, Condensing unit
generated, unit location is outside the building., Cooling unit for
outdoor installation, Width: 1,700mm, Depth: 950mm, Height: 1,497mm,
Net weight: 378 kg, Sound: 50.5 dBA 10 m, Power: 8,830W; 20.61A,
Insulating hood (conservatory principle), Insulation: plastic 5-fold
hollow chamber profile, 80 mm thick, Surface: white (similar to RAL
9016) with rounded edges, Fixed elements: without glass - with
insulated compound filling 24 mm (Uf 1.2 W/m²K) with glass - with,
Insulating glass 24 mm (Ug 1.1 W/m²K), Windows Approx. 6 access
windows with lockable calotte, Floor: without insulated cell floor,
construction with stainless steel U-profiles on on-site tiles or,
concrete structure, Cut-outs: Delivery of 2 cut-out frames approx.
1250 x 300 mm (W x H i. L) as a circumferential one, Stainless steel
frame for the product inlet and outlet, External room dimensions:,
Depth approx.: 1,800 mm, Length approx.: 4,500 mm, Height approx.:
2,000 mm, Pos. 4 - cross conveyor/separation, Execution as described
under item 2, but without stopper/slider, Pos. 5 - 2 conveyor systems,
multi-strand, as a buffer, Execution as described above, with 2 drive
motor blocks, make SEW, type Movimot®,, 400/230 V, 50 Hz, IP55,
energy efficiency class IE3; Speed via a setpoint adjuster,
adjustable, Pos. 6 - Conveyor system to the labeller, single-strand,
Execution as described under item 2, Pos. 8 - Control type INSEVIS,
The system is controlled by a small PLC from INSEVIS, type 577V. The
service, is implemented via a 6 touch panel. This panel is a graphical
operator panel on which all, Faults are displayed in plain text. The
panel is password protected for different users., The belt speeds are
adjusted using frequency converters, type SEW, Movitrac®. The master
value is optionally specified by the PLC. The Rittal stainless steel
enclosure, has the approx. dimensions: 810 x 1400 x 300 mm (W x H x D)
and is attached directly to the frame of the system, mounts. The
F4450968 wiring is done in VA-Gi bunks., The following components are
used:, • Control cabinet Rittal type HD, • Main switch Eaton type
P1, 3-pole, • Siemens Sitop power pack, • S7 panel PLC Insevis
type 577V, • Frequency converter SEW type Movitrac®, • Siemens
5SY circuit breaker, • Siemens 6EP electronic fuses, • Motor
protection switch Siemens 3RV, • Siemens 3RT/3RH contactors and
contactor relays, • Pilz emergency stop relay PNOZ, • Air
conditioner, • Controls Eaton type M22, • Weidmüller type ZDU,
ZIA terminal blocks, • Light barriers Sick type WL12G, • Reed
contacts Festo type SM, • Socket fused with 30 mA, The circuit
diagrams are created using the EPLAN software, P8 in German.
Programming is done with the Simatic STEP7 software in German. The,
Visualization is done with VisuStage in German., Dimensions of the
main components:, Cooling tunnel (one part), L x W x H: 5,300 x 1,650
x 2,020 mm, weight approx. 2,000 kg, Insulated hood on a pallet, L x W
x H: 1,500 x 1,700 x 2,400 mm, weight approx. 800 kg, Refrigeration
unit, H x W x D: 1,500 x 1,700 x 950 mm, weight approx. 380kg, Control
cabinet with various system parts: L x W x H: 5,000 x 2,350 x 1,800
mm, weight approx. 800 kg, conveying capacity: 750pcs/h, inlet
temperature approx.: 80 ° C, outlet temperature approx.: 35 °
C seller offer No. resale 163782113
|