METALLKRAFT satılık ikinci el makine

Genel: Yapım yılı 2019 İş mili hızı 1.450 rpm Sıkıştırma yüzeyi 300 x 600 mm En büyük taşlama tekerleği 355 x 38 x 127 mm Seyir hızı tablosu 5 – 25 m/dak İş mili ile tabla arasındaki mesafe 500 mm Ağırlık 1.700 kg Diğer ekipman ve aksesuarlar şunları içerir: Otomatik besleme kontrolü AD5 Soğutma sıvısı cihazı Hidrolik

Genel: Yapım yılı 2019 İş mili hızı 1.450 rpm Seyir hızı tablosu 5 – 25 m/dak En büyük taşlama tekerleği 355 x 38 x 127 mm Mesafe mili – tabla maks. 500 mm Sıkıştırma yüzeyi 300 x 600 mm Otomatik besleme kontrolü AD5

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Cutting diameter: 290mm, cutting width 320mm, saw blade length: 3100mm, saw blade dimensions X/Y/Z: 3100mm/27mm/0.9mm, miter cuts min./max.: -60°/+60°, cutting speed: 20m/min - 100m/min. Weight: approx. 570kg, dimensions X/Y/Z: approx. 1800mm/950mm/2100mm. An on-site inspection is possible.

Description: Belt width 80 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 60 kg

Description: Width of belt 80 mm Motor 2-stage Collection bag must be replaced With replacement belts Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 50 kg

cutting diameter: 240 mm saw band length: 2980 mm cutting width: 320 mm dimensions of saw-band: 2980 x 27 x 0,9 mm band speed: 35 / 70 m/min table height: 940 mm capacity 90 degrees: round: 290 mm capacity 90 degrees: flat: 320x290 mm capacity 45 degrees: round: 240 mm capacity 45 degrees: flat: re. 240x150 / li. 240x100 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150x180 mm total connected load: 2,6 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 1800 x 1050 x 1950 mm semi-automatic band saw Furnishing: - Micro dosing system - 3000 mm feed roller conveyor - Coolant gun for cleaning the machine - Miter cut from 45° right - 60° left - automatic vice clamping + vice opening - automatic saw cut + automatic raising saw bracket The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 40 mm square edge steel: 40 mm L-beam: 120 x 120 x 10 mm pressure: 55 t engine output: 5,5 kW weight of the machine ca.: 1250 kg dimensions of the machine ca.: 1650 x 1100 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

sheet width: 1050 mm plate thickness: 1 mm distance between columns: 1000 mm weight of the machine ca.: 0,2 t dimensions of the machine ca.: 1,16 x 0,93 x 0,73 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Levha kalınlığı: 1,2 mm rulo çapı: 62 mm boğaz: 100 mm Makinenin ağırlığı yaklaşık: 50 kg Makinenin boyutları yaklaşık: 560 x 220 x 500 mm - Motorlu boncuk işleme makinesi - Çeşitli boncuk silindirleri - ayak pedalı

Hydraulic punching machine for holes / beans, type: hls-55 metallkraft 2008. The machine is in very good technical condition - like new. - pressure 55 tons - max diameter of punched holes fi 40x10mm, fi 20x20mm - engine power 5.5 kW - weight 1300 kg We add several sets to the machine. punches and dies for cutting holes / beans.

roll diameter: 50 mm roll diam. toproll: 155 mm roll diam. bottom roll: 155 mm total power requirement: 1,5 kW dimensions of the machine ca.: 1000x750x1400 mm weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2450 mm cutting width: 250 mm cutting speed: 40 / 80 m/min dimensions of saw-band: 2450 x 27 x 0,9 mm : 100 mm : 90 mm : 90 x 90 mm : 160 mm : 160 x 110 mm : 250 x 190 mm total power requirement: 0,75 / 1,1 kW table height: 925 mm weight of the machine ca.: 218 kg dimensions of the machine ca.: 1300 x 700 x 1530 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M6 - M36 mm turning speeds: 156 U/min radius: 1200 mm angle adjustable from - to: 0 - 90 Grad weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. ...