şişe dolum tesisleri

This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 45-90mm | bottle height: 75-240mm | sorting speed: max. 100 bottles/min | machine stops automatically when the bottles are jammed due to photocell | MITSUBISHI PLC, WEVIEW touchscreen, OPTEX photocell, SCHNEIDER frequency converter | Frame of stainless steel (SS304) | compressed air: 6-8bar | power: 220V, 2kW | machine dimensions: L2600xW1500xH1500mm. Optional: different unscramble trays for different bottle sizes.That machine/system is available in different versions for different packaging sizes and with different packaging speeds.Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines ...

Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler | Filling machine with 4 filling heads for liquids with high or low viscosity | Lid closing machine for different sizes and shapes of lids including lid unscrambler | Labelling machine for bottles/cans/containers made of glass or plastic | Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4 | filling range: 100-1000ml | dosing method: by piston pump | accuracy: +/- 1% | bottle height: 15-400mm | bottle diameter: 25-200mm | speed: max. 1000 bottles/hour | label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weig ...

Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles | filling with 2 to 8 filling heads and with high accuracy by anti-drip device | automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles | outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge) | number of heads for lid positioning and capping: 1, each (can be customized for a surcharge) | filling range: 30-100ml | dosing method: by piston pump | accuracy: +/- 1% | speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour | label size: L10-350mm, W10-200mm | product contact parts are made from corrosion- ...

Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops, nail polish and other. Infeed by infeed line | possibly from an sorting system upstream (which is not included in this system). The system includes a container unscrambler, which sets the small bottles after the filling into an outfeed line. The system is PLC controlled. - Specifications: max. speed of the machine in neutral: 50 bottles/Minute | filling capacity: 20-60ml | 1.75kW | 6-8bar. All theses specifications are just examples. The final system will be custom-built. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation.Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available  ...

Filling and capping system for aseptic and precise filling and capping of small bottles with small liquid volumes as used for eye drops, nasal sprays, nail polishes, esoteric oils etc. Dosing by piston pump. - Specifications filling and capping system: number of filling nozzles: 4 | number of capping heads: 2 | filling volume: max. 10ml/bottle | speed in neutral: max. 60 bottles/min | accuracy: = ? 1% | suitable bottles: glass, PP, PE, PVC | product contact parts from stainless steel 316L.Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 1-head capping machine also works quickly, precisely and is suitable for aluminum twist-off caps. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 1 | filling volume: max. 30ml per vial | speed of the machine in neutral: max. 120 bottles/min (at 4 filling stations and 5ml per vial) | accuracy: =  ...

Fully automatic filling and closing machine for filling pharmaceutical liquids into vials. Suitable for aseptic filling and for vaccines. The main machine doses with peristaltic pump system safely, precisely and caps the vials with a freeze dryer stopper. The 8-head capping machine also works very quickly, precisely and is suitable for aluminum twist-off caps. The vials are guided individually, which enables safe and fast filling and capping. The included collecting table for the final product, the main machine and the capping machine can be flexibly combined to a complete line. All machines are equipped with dust cover and laminar flow hood. - Specifications of filling and capping system: number of filling stations: 4 | number of capping heads for freeze dryer stopper: 1 | number of capping heads for aluminum twist-off caps: 8 | filling volume: max. 30ml per vial | speed of the machine  ...

This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 20-80mm | bottle height: max. 120mm | sorting speed: max. 100 bottles/min | compressed air: 5bar | power: 220V, 0.6kW | machine dimensions: L950xW950xH1000mm. Optional: different unscramble trays for different bottle sizes.That machine/system is available in different versions for different packaging sizes and with different packaging speeds.Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines ar ...

Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m?/6bar, filling water: 9m?/h, rinsing water: 3m?/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg.Please note  ...

Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml) | bottle volume: 350-1500ml | PET bottles | standard 28/30mm PET caps | 1500 liter of water filling /hour | 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of  ...

Used 5 litre bottle holder applicator from Spanish company AND & OR model 50SIA8000-TL. New 2019. Capacity 5100 bot/h. Power supply 230V, 50Hz. Power 3190 W

Used line for bottling and packaging carbonated drinks in 500ml glass bottles. Bottle capacity on 500 ml 22000 L/h Line composition: 1. Demag hoist, year of production 2009, model EUDC Pro 2-250 2. Simonazzi crate depalletizer, model ROBOT DEPAL, year of production 1994 3. Simonazzi bottle unloader, model DECAMATIC, manufactured in 1994 4. KHS bottle washer, model Omega Kaskana 23/87ES01, year of production 1994 5. Simonazzi crate washer, model LAVACCASSE M-2000, year of production 1994 6. Simonazzi fillinf machine, model EUROSTAR RAA-425, year of production 1994 7. Pama tunnel pasteurizer, model PAMA 484 DR, year of production 1994 8. Krones labeling machine, model PRONTOMATIC 720-21-8-8-110RM, year of production 1994 9. Simonazzi crate packing machine, model INCAMATIC IAB 443, year of production 1994 10. Simonazzi crate palletizer, model KOMBI PAL IBP 254, year of production ...

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Used empty glass bottle inspector HEUFT with pre-inspector and rejection Built in 2016. Dismantled and immediately available.

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

Blower Kosme KSB year 2005 - Filler Kosme RPE 16-8-150 year 2006 - Labeller Contiroll K745-L66 - various accessories and conveyors system that complete the line used for milk filling and packaging. Line dismantled and actually stored in our warehouse close to Padova and ready to be delivered. The price is refered to complete line as is. In case we can overhaul/adapt the line to your requests. Feel free to get in touch with me in order to have info-quotation-layout

Bottling line KP 2010 Automatic bottling line for bottles. Filling up to 2 liters 6-head filling Speed + 3000 bottles / hour depending on bottle size and product Material stainless steel Lightweight construction, wheels underneath, easy to move Conveyor slatband type, length 4 meters Gutter under the conveyor Electricity 380 v. Compressed air: 6 bar

Used filling line for EW-PET Capacity: 12,000 bottles/h at 0.5l PET Product: Soft drinks

Used filling line for EW-PET Capacity: 12,000 bottles/h at 1.5l PET Product: Soft drinks

Used KRONES carbonated drink bottling line – capacity: approx. 7,000 bottles/h • Bottle formats: 330, 500, 700, 750, 900, 1000 ml • The line worked with cider, sparkling wine and champagne. • Possibility of pouring beer in a returnable/non-returnable bottle • Possibility to check and run the line before purchase. Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1989 (Kontipack E) 2. Krones returnable bottle washer from 1988 Type 150/10-110 3. Krones VKV40/SV10/KK filler from 1988 - 40 fillers with ALCOA capping machine 4. Krones capping machine 5. Bottle capping machine ADELSKI PP2010, 2007 (Adelski) 6. Manual cork presser 7. Installation for Velcorin 8. Wire insertion machine (Nortan, Minerva 80-120, 1995) 9. Machine for applying gold (Nortan, Prisma 80:s, 1994) 10. Labeling machine + banderole (Krones Taxomatic, KES -  ...

Model Rinser: Variojet 2.520-070-113 Model filler: Sensometic VP-G 050-113/SV 10/SOV 10-S Model Etima: Prontomatic 720-12-6-4-180 Capacity: 12,000 bottles/h with 0.7l glass bottle Product: non-carbonated beverages

Capacity: 9,000 bottles/h Product: Oil in 1,0l PET

Capacity: 7,200 bottles/h Features: 0.5l, 1.0l, 1.5l, 2.0l PET bottle

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

Monobloc filling machine suitable for filling liquids and creams into corresponding bottles. Dosing volume: up to 500 ml. Incidentally, incl.: - Feeding turntable, - Infeed and outfeed conveyory - screw-cap sealing unit - Sep. Control cabinet - Spare parts etc.

Used bottling line by Pack-Trend, new 2020. Machine type: Dispensing, capping, labelling machine Weight: 675kg Type of medium: liquid, gel, cream. Material stainless steel AISI304 Machine capacity: up to 900 cycles/hour Packing portion: 0,1-0,5 L Machine dimensions working: Height H - 1600mm Width B - 1500mm Length L - 3000mm. Electrical supply: 230V/50Hz Pneumatic Supply: 6-8 bar Power consumption: 1500W Accessories: ROTARY RECEIVING TABLE ROTARY INFEED TABLE Certification: CE Technical and Operational Documentation.

Non - retournable glass line composed of Procomac, Krones, Transpak & Dimac machinery.

Bottle filler for the semi-automatic filling of liquid products. Suitable for products such as milk, juices, oils, spirits, etc. (all liquid products) in cups, bottles, canisters, cans or similar containers. The to be filled container is placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Full pneumatical version without electronics. The filling pulse is triggered via a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing systems. Capacity: 600-1.800 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1

Bottle filler for the semi-automatic filling for pasty products. Suitable for products such as e.g. yoghurt, oils, cosmetics etc. in cups, bottles, canisters, cans or similar containers. The to be filled container is placed under the filling head, the product is sucked through a tube from the filler and discharged volumetric. Full pneumatical version without electronics. The filling pulse is triggered by a pneumatic foot switch. Replacing the foot switch with pneumatic components such as a photocell or an external pulse, this filler can be integrated in existing fullautomatically systems. Capacity: 600-1.200 filling strokes per hour (depending on e.g. by product volume, filling speed, operating personnel, etc.) Number of filling stations: 1

Used automatic double-row packaging machine by SMI model LSK 42 F. Output of 42 bags per minute. The packer has an electric heating tunnel with automatically controlled air blowing and ejection. It has adjustable flaps to direct the hot air precisely onto the pack. It has a touchscreen operator panel and an air-conditioned control cabinet Formats: 0.5l; 1.5l; 2l.

Used STORK 0.75 l non-carbonated bottling line – capacity approx. 8,000 bottles / h • Bottle formats: 750 ml • The line poured still/still hot wine. • Possibility to check and run the line before purchase. • Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1988 (Konti- Auspacker) 2. Label ripper 3. Krones returnable bottle washer (KES 1-3-212, 1992) 4. Soda lye detector (Michael Horst, miho LC2000 5. Stork pouring machine (VD48/8, 1978), 48 pourers 6. AROL – SATURNOR12T600 capping machine, 1991 7. Rolex automatic closing machine (type: SWK-800 from 2001) 8. Plate pasteurizer 9. Manual presser 10. Banding machine (KRONES, Taxomatic, 1995) 11. Bottle loader into crates (Kettner, Konti-Einpacker, 1988) 12. Transporters 13. Control cabinets 14. Documentation

Used monobloc made by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type VS 60/110/12 LV. New 1992. Specification: - 60 pourers, - 12 closing heads, - Filler and cap inspector, - Capacity 20,000 bottles/hour, - Contents: 250 ml., 500 ml., 700 ml., 750 ml.

Qty. 1 Second-hand PET blowing and water filling line Mfc.: Tanner AG, SACMI, FT System, Krones & others Built: 2005-2013 Capacity: 12,000 bph on 1.5 L - Pack 3X2 16,200 bph on 0.5 L - Pack 4X3 16,200 bph on 0.35 L - 4X3 pack Product: Still and sparkling water Cap: 28 mm PCO 1881 Mould series: 3 sets of moulds for 0.35 L/0.5 L/1.5 L Note: The line is in production until the end of October 2023 Various new mechanical and electrical spare parts to the value of EUR 200 k are available with the line.

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Glass Bottle Filling Block Wild Goose Meheen M6 - 2400 bph – 2015 Wild Goose glass bottle filling block for beer, cider, cocktails, carbonated and non-carbonated soft drinks, kombucha, wine and other beverages. The filling block consist of Meheen M6 counter pressure filler with six filling nozzles, crown cab sorter, rinser, bottle crapper plate for standard long neck glass bottles and a large hopper for crow cap feeding. This Meheen M6 filler block was manufactured in year 2014 and it has been filling totally approx 2 million bottles beer. Full maintenance done by UK based Oasthouse Enginering Ltd, Wild Goose authorised service company in 2021, and approx 40 000 bottles done after last maintenance. Meheen fillers are designed for specific type bottles only and this uses 330ml standard long neck bottles with 26mm crown cap. Wild Goose Meheen filling systems all processes are pneumati ...