çıkarma sistemleri

Description: Clean air dust extractor, test mark H3, extraction nozzle:120 mm motor power 1.1KW, Filter cleaning by hand, filter area 5.1m², Chip collection volume: approx. 135L, Weight: approx. 120Kg, Dimensions L/W/H: 1175mm/650mm/1973mm PRICING IN FUNCTIONALLY TESTED CONDITION SOLD WITHOUT WARRANTY!  ,Approx. Onsite Dimension. (l x w x h): 1,180 x 650 x 1,980 mm, weight approx.: 120 kg

ALKO ECO-JET 35/3N Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A) Fire protection: sprinkler installation with powder fire extinguisher

Description: • Suction system with bag filter unit • Extractor fan with 7.50 KW-1455 rpm motor • Upper filtration part with bag filtersApprox. Onsite Dimension. (l x w x h): 5,100 x 1,500 x 4,800 mm, weight approx.: 2,000 kg

Description: • Centrifugal extraction fan • Serial number 22 • Motor power 55 KW-1475 rpm • Fan diameter approx. 700 mm • Belt drive • Input pipe diameter approx. 700 mm • Output pipe diameter approx. 650 mmApprox. Onsite Dimension. (l x w x h): 2,550 x 1,740 x 2,050 mm, weight approx.: 900 kg

Description: • Centrifugal extraction fan • Serial number 1046 • Motor power 75 KW-1475 rpm • Fan diameter approx. 1200 mm • Belt drive • Input pipe diameter approx. 800 mm • Output pipe diameter approx. 750 mmApprox. Onsite Dimension. (l x w x h): 3,100 x 2,000 x 2,250 mm, weight approx.: 1,100 kg

Description: • Centrifugal extraction fan • Serial number 308 • Motor power 37 KW-1475 rpm • Fan diameter approx. 1000 mm • Belt drive • Input pipe diameter approx. 650 mm • Output pipe diameter approx. 550 mmApprox. Onsite Dimension. (l x w x h): 2,530 x 1,550 x 1,850 mm, weight approx.: 700 kg

Description: Voltage 400 V , Connection diameter 160 mm , Nominal volume flow rate 1750 m³/h , Type B1 , suitable for Lot 690 , without further accessories , without CE certificateApprox. Onsite Dimension. (l x w x h): 1,800 x 900 x 2,100 mm, weight approx.: 300 kg

Description: Machine no. 148-23 The machine has had 3months of irrregular use , See attached PDF for more information on this machine. Approx. Onsite Dimension. (l x w x h): 3,147 x 1,120 x 2,380 mm, weight approx.: 1,740 kg

Holtrop Jansma Suction Manufacturer: Holtrop Jansma Type: MSK300 Capacity: 6,000 m3/hr Year of construction: 2001 and 1999 Fan: ETD 300, 5.5 KW/1,500 rpm Explosion Pressure release: doors serve as pressure release in case of explosion Pressure measurement: Pressure gauge Cleaning: 0,09 KW/1500 KW Ruttelmotor Dimensions: 3.3503.0001.100 mm Scope of delivery: Filter system with built-in fan, control cabinet

Holtrop Jansma Extraction with Kontainer Chip Disposal Type: MSK350S Year of construction: 1998 Type: overpressure filter system Intake manifolds: ø350 mm Capacity: 8,000 m3/hour Year of construction: 1998 Filter surface: 46 m2 Fan: ETD 350, 7.5 KW/1.500 tpm Star wheel chip disposal: 800 mm - Pressureless Chip disposal fan: EMD-200, 4 KW-300tpm, 45m3/uur Explosion Pressure Release: Doors serve as a pressure release in the event of an explosion Pressure Measurement: Pressure Dial Gauge Cleaning: 0.13 KW/1500 KW vibrating motor Air recovery: 500500 mm with built-in flame protection damper Dimensions: 3,3503,0001,200 mm Scope of delivery: filter system with intake fan Fan, transport fan, control cabinet, air recovery with built-in flame protection flap

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

Description: Vacuum extraction 21,000 m3/hour incl. control, -pressure air cleaning, -transport screw, -transport fan and return air duct with branded damper and summer/winter damper Brand: Holtrop Jansma - AFS Type: OSFS 185 Year of construction: 2005 Vacuum extraction Diameter suction opening: ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (base 2,700 mm + top 2,700 mm + 800 mm fans) Capacity: 21,000 m3/hour Power: (2x) 15 kW, 380V, 56 Amp, 10,500 m3/h, 3,000 rpm, 3,850 Pa, type: RL E 550x130 Filter surface area: 185 m2 Number of filter hoses: 150 Length filter hoses: 2,200 mm Diameter filter hoses: 180 mm Filter cleaning Compressed air cleaning Dry riser connection Conveyor auger: HJ STH-380, 12 rpm Rotary sluice: HJ ZRS-300, 31 rpm Drop hole dimensions: 250x350 mm Conveyor fan: Suction pipe diameter: ø250 mm Capacity: 4,000 m3/hour Motor: 5.5 kW Speed: 2,900 rpm Conveyo ...

Holtrop Jansma extraction system: dust filter, 4 fans, control cabinet, airlock, return air blower Type: ABFS Filter Filter surface: 230 m2 Filter capacity: 27,000 m3/hour Year of construction 1997 Ventilators: 2EMDø250‐5.5 KW RMDø400‐11 KW ETDø450 15 KW ETDø300‐5,5 KW Additional extraction for the chipper with 5.5 KW Set up/installed in a 20" container. Filter system is complete with all accessories including air recirculation. Hacker details: Gross GAZ 62 Year of construction: 1995 Motor power: 18.5kW 30 knives 30x30x15/ EC 80 Sieve perforation 10/12mm All knives, as well as the sieve, were renewed 10/2023

Description: 24 filter media FPA ,160 x 1000 max. volume flow 8000 m³/h Nominal volume 7300 m³/h Motor 15 kW Voltage 400 V CE certificate and electronic operating instructions available suitable for edge banding machine IMAApprox. Onsite Dimension. (l x w x h): 3,800 x 1,200 x 2,400 mm, weight approx.: 1.200 kg

Description: Extraction nozzle diameter 160 mm, nominal volume flow 1450 cubic meters per hour, maximum volume flow 1950 cubic meters per hour, motor power 2.2 kW, nominal speed 2000 rpm, voltage 400 volts, with two collection containers, with CE certificateApprox. Onsite Dimension. (l x w x h): 1,800 x 1,100 x 2,000 mm, weight approx.: 370 kg

Abs. system, extraction system Fabr. Hump Polytechnic YOC 2015 Type Multistar SH-18/6 Air volume approx. 120,000m³ Filter Area 864.8 m² Underpressure with 6 fans each 36 Kw approx. 20,000m³ with frequency converter Discharge with Schneke and Zerladeschleuse with warm air channels with control

Description: Chips suction cups, (packaging material)serial number: 220000 60904, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 2,000 mm, weight approx.: 30 kg

Description: Volume flow: 1200m³/h Connected load: 400 V Frequency: 50 Hz Motor power: 1.5 kW Control voltage: 24 V Approx. Onsite Dimension. (l x w x h): 970 x 660 x 1,195 mm, weight approx.: 200 kg

Power 3Kw Speed 2800 rpm Air volume 1000-3500Nm3/h Total pressure difference 1000-400 N/m3 Hdqibj2 Several suction pipes, trouser tubes, etc.

Grocer Suction stand filter Suction nozzle diameter 180mm Chip bag diameter 500mm 16 filter bags Filter bag diameter 200mm Filter bag height 1450mm Abhalation by hand W= 1100 mm L= 1100mm H = 2600mm G&-4983-F9793

Description: • Centrifugal extraction fan • Motor power 15 KW-2940 rpm • Fan diameter approx. 500 mm • Belt drive • Input pipe diameter approx. 300 mm • Output pipe diameter approx. 300 mmApprox. Onsite Dimension. (l x w x h): 1,470 x 1,080 x 1,420 mm, weight approx.: 320 kg

Extraction and filter system Nestro 9/4/20 with chip container YOC ca. 2005 Filter area 156 m² Hoses 2 m long, 108 pieces, diameter 220 mm Total air volume approx. 20,000 m³/h Suction fans 1. Fan 16 kW 350 mm approx. 9,000 m3/h 2. Fan 11 kW 350 mm approx. 6,000 m3/h 3. Fan 7.5 kW 250 mm approx. 4,000 m3/h Return air duct with summer/winter flaps Cleaning electromechanically 3 motors each 0.66 kW Rotary valve 0.37 kW 3860 mm Transport fan to container 4 kW Control of the system with electrical plans External dimensions approx. L x W x H 4000 x 24200 x 5000 mm Weight 6,000 kg Container for chips L x W x H 4500 x 1900 x 2100 mm Weight approx. 2,000 kg The extraction system is still in operation and will be replaced by a larger system in January 2024 The facility is fully operational and will be available at the end of January 2024 The system can be disassembled i ...

Sec. Appendix Fabr. Nestro Type 9/4/30 S YOC 2005 Filter area 385 m² Flow rate 40.00om³/h with 2 fans each, 22 Kw Vacuum system Rotary valve to the container Filter cleaning automatically Return air channels L/W/H 6.4 x 2.4 x 9.2 m with control with pipes

Extraction system Nestro Mobile extraction system Type NE 160 Built in 1993 Mobile on castors with With mobile dust barrel Extraction connection diameter 160 mm Filter area 11.5 m² Nominal flow rate 1900 m³/h Motor power 2.2 kW Dust barrel capacity 185 liters Dimensions 1450 mm x 850 mm x H 1950 mm Weight approx. 240 kg

0: 250 mm0: 3530 m³/h0: 2500 paDimensions (L/W/H): 3.350x1.020x2.290 mmengine output: 5,5 kWturning speeds: 2800 U/mincompressed air: Pmax 8,0 barweight: 1100 kgNestro dust extractor NE 250 WFor sale on behalf of the customer ex location--------------------------Manufacturer description:Dust extractor with pneumatic shakingand automatic water extinguishing systemIncluding suction nozzle d=300 mm, 5 m cablewith plug and reversing switch, electric motor 5.5 kW400V/50 Hz, on/off switch, potential-freeContact for machine monitoring, motor protection switch,Pressure difference display, 3 mobile dust binsClamp bracket, 3 chip collection bags (PE) 600x600 mm,i=1100mmHousing made of galvanized sheet steelTechnical data:Nominal volume flow 3,530 m3/hassociated negative pressure 2,500 PaSuction side connection d=250 mmContinuous operation modeType of current: three-phasePower consumption 5.5 kW/1 ...

Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x

Rupes HE900 Turbine High Vacuum Suction Note: Rupes Type: HE900 Year of construction: 2009 Net worth: 7,5 PK turbine - direkt aangedreven Drive: 5,5KW / 7,5PK electric motor Dust-air separation: cycloon Suction line: ø 80mm Capacity: 6 to 8 werkplekken Air volume: 530 m3/hour Vacuum: 28.4 kPa Cleaning: Automatic filter reiniging met perslucht Perslucht: 6 bar Noise: 71 dB(A) Dimensions: Filter box: 1.000.551.50 meters

composed of: Bagging element with 5 bags and 30 filter bags Bagging element with 4 bags and 24 filter bags Fan Schuko S-300, Y/O 2019 Suction and pressure nozzles: 300mm Volume flow: 6753m3/h 2584 Pa Voltage: 400/690 volts, 50 Hz Engine speed: 2860 rpm Protection class: IP54, pos. GR 180 Fan with engine renewed in 2019, 7.5 kW, B3, IE3, 2,950 rpm

Dimensions (L/W/H): 3.900 x 1.620 x 2.660 mmFilter capacity: 50 m²Weight: ca. 1.500 kg: 350 mm: 6.927 m³/h: 3.365 paoutput: 2 x 5,5 kw: M : 72 dB(A)Number of working hours: Absaugung ca. 1.412 hNumber of working hours: Presse ca. 1.891 hCapacity: Presse, ca. 30-45 kg/hDiameter of the briquets: 60 mm: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ceiling filter 160 B 10x10/20/101 - motorized shaking, 0.18 kW - Filter area 100.5 m² (BGIA Cat. G) - Filter 2000 x 160 mm, 100 pcs. - Extinguishing device - Weight 520 kg - Dimensions. 1,950 x 1,970 x 2,450 mm Chip keeper SPB2020 - Volume approx. 2.7 m³ - Dimensions 2 x 2 x 990 mm - Discharge screw - Agitator - Gear motor 1.5 kW Centrifugal fan S300 F/L2 11.0 kW - Nozzle-Ø 300 mm - Vol.Strom 5.300 m³/h, 4700 Pa - Protection class IP54, pos. GR 270 Fan 7,5 KW switchboard - Star-triangle circuit 11 kW - controls both fans and 1 x motor. Shaking All information is subject to the actual equipment

Filter system Schuko gebr. with discharge chain Rotary valve overhauled Filter bags in good condition Automatic hose cleaning Air ≈ 36,000 m³/h Length ≈ 5,100 mm Width ≈ 2,000 mm Height ≈ 5,200 mm incl. electrical control cabinet optional fans, completely overhauled Ø500 ≈ 14000 m³/h – ≈ 2600 Pa – 18.5 kW Ø350 ≈ 10000 m³/h – ≈ 3200 Pa – 18.5 kW Ø350 ≈ 12000 m³/h – ≈ 3200 Pa – 22.0 kW Ø315 ≈ 8000 m³/h – ≈ 2600 Pa – 11.0 kW Ø300 ≈ 8000 m³/h – ≈ 2600 Pa – 11.0 kW Ø250 ≈ 4000 m³/h – ≈ 2500 Pa – 5.0 kW optional Piping optional Chip container 30m³

Description: Motor power 4 HP (3 kW) Flow rate 4000 m³/h 12 filter sleeves Diameter of the sleeves 180 mm Height of the sleeves 1500 mm Filter surface area 10.5 m² 3 dust collection bags diameter 500 mm Extraction diameter 220 mm Sleeve section 1x150 mm and 3x120 mm 4 shut-off valves ATEX approved main motor: 3 kW, Volume flow/delivery rate: 4,000 m³/h, filter area: 10,5 m², Approx. Onsite Dimension. (l x w x h): 3,300 x 800 x 2,100 mm, weight approx.: 300 kg

Description: Motor power: 3.0 kW Air output: 3170 m³/h Pressure difference: 1500 Pa Electric pneumatic slide valve including solenoid valve: 100 mm diameter Incl. SPÄNEX concentrator type K67 filter area 67 m² Incl. bunker warning systemApprox. Onsite Dimension. (l x w x h): 6,000 x 1,500 x 7,000 mm, weight approx.: 3,000 kg

Description: Table dimensions 2000 x 1000 mm Suction mouth diameter 31.5 cm With shaker and 3 drawers without motorApprox. Onsite Dimension. (l x w x h): 1,000 x 2,000 x 970 mm, weight approx.: 0 kg

Description: 4 filter units Various motors Pipes in various diameters Sale ex foundation (dismantling by the customer) Partial dismantling not possible, system must be completely dismantled without documentation and CE certificateApprox. Onsite Dimension. (l x w x h): 10,000 x 10,000 x 3,000 mm, weight approx.: 10,000 kg

Description: SiloApprox. Onsite Dimension. (l x w x h): 3,000 x 1,200 x 6,300 mm, weight approx.: 2,500 kg

Description: Vacuum group 5 Bags Ø 500 Outlet Ø 350 mm  ,Approx. Onsite Dimension. (l x w x h): 3,800 x 900 x 1,300 mm, weight approx.: 180 kg

Description: Vaccum group 3 Bags Ø 500 mm Outlet Ø 250 mm Three fase connection Power 3 Kw / 2860 r.p.m.  ,Approx. Onsite Dimension. (l x w x h): 2,400 x 800 x 1,400 mm, weight approx.: 150 kg

Description: S/N: 217859Approx. Onsite Dimension. (l x w x h): 4,000 x 1,000 x 3,000 mm, weight approx.: 470 kg

Weibert ASA 2803 Aspirator Rated volume flow: 2800m3/h Filter area 3.84 m2 Chip collection volume 240l Suction socket: 203mm Suction nozzle outlet: 3x 100mm Sound pressure level max. 87.5dB (A) Recording power 2.2kW Engine 400V 50Hz LxWxH 1500 x 500 x2100mm Weight 53kg

Description: Rated voltage: 400 V Frequency: 50 Hz Rated current: 25 A Rated power: 16,75 kW Operating temperature: 120 degrees Approx. Onsite Dimension. (l x w x h): 1,230 x 1,200 x 1,750 mm, weight approx.: 500 kg

Cyclone separator WISSMATEC Ø ≈ 2000 mm Steel rack for cyclone Year of construction 11.2020