Üretici:
(kategori: 102)
Grinding wheel mount, standard flanges, special flanges, grinding wheel flange -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 45-58 mm -Number: 3x mounting flanges available -Price: per piece -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.
Grinding wheel holder, standard flanges, special flanges, grinding wheel flange-Grinding wheel holder: Holder: Ø 127 mm-Mounting: Hole shaft cone Ø 45-58 mm-Type designation: 407x10-100x127 015 322 0020-Quantity: 1x mounting flange available-Dimensions total Ø 180 x 105 mm-Weight: 6.5 kg
Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder-Holder: for pull and lead screw-Dimensions: see photos-Transport dimensions: 160/120/H400 mm-Weight: 14.7 kg
Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder-Holder: for pull and lead screw-Dimensions: see photos-Transport dimensions: 105/155/H450 mm-Weight: 11.3 kg
Upper support, upper slide, dovetail guide, cross table-Tool slide: from automatic lathe SUGA type STS-2-Measurements: see photos-Dimensions: 830/610/H300 mm-Weight: 119 kg
Stop, depth stop, length stop for lathe -Groove opening: 22 mm -Number: 1x keystrokes available -Price: per piece -Dimensions: 130/110/H50 mm -Weight: 2.4 kg
Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg
Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: incl.transport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg
Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg
Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Type: 8230-160/5-Outside: Ø 160 mm-Bolt circle: Ø105 mm-Mounting: Short taper 5, cone Ø 79 - 82 mm-Dimensions total Ø 160 x 65 mm-Weight: 2.2 kg
Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange-Chuck flange: mounting flange-Outside: Ø 198 mm-Bolt circle: Ø133 mm / M12-Hole: Short taper 6, cone Ø 102 - 105 mm-Dimensions total Ø 198 x 55 mm-Weight: 4.0 kg
Lathe, turning machine, lead screw lathe, lead screw lathe -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg
Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 280 mm-Inside: Ø 142 - 145 mm-Dimension: Ø 280 x 45 mm-Weight: 13 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg
Copy head, copy head, copy device, copy lathe for top support, top slide, dovetail guide, tool slide, cross table -Tool slide: from Meuselwitz lathe -Measurements: see photos -Dimensions: 760/340 / H200 mm -Weight: 87 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool slide: Support slide support carrier with turning tool holder-Clamping height: 40 mm-Dimensions: see photos-Dimensions: 370/180/H170 mm-Weight: 17.8 kg
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool carriage: support carriage support carrier-Tool holder: Ø 32 mm-Dimensions: see photos-Dimensions: 460/190/H205 mm-Weight: 21.6 kg
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 203 mm-Mount: M70 x 6.5-Hole circle: Ø150 mm / M12 / Ø126/17 mm-Dimensions total Ø 203 x 60 mm-Weight: 6.4 kg
Three-jaw chucks, three-jaw lathe chucks, power chucks-Chuck size: Ø 250 mm-Short taper mount for: bayonet mount, taper size 8-Weight: 41 kg
Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 250 mm-Inside: Ø 100 mm-Hole circle: Ø180 mm/ M10 / Ø230/10 mm-Dimensions total Ø 250 x 23 mm-Weight: 6.1 kg
chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 292 mm-Inside: Ø 22 mm-Hole circle: Ø212/10 mm / Ø108/11 mm-Dimensions total Ø 292 x 23 mm-Weight: 8.2 kg
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide-Tool slide: Support slide lower part support carrier-Dovetail: 90 to 73 mm 12 mm high-Dimensions: see photos-Quantity: 5x bottoms available-Price: per piece-Dimensions: 210/180/H25 mm-Weight: 4 kg/piece
Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: VDF Heidenreich & Harbeck, Leadscrew and Feedscrew Lathe Type V3 -Machine bed: hardened -Turning length: 1700 mm -Turning Ø over bed: 500 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 57 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Bezel: 150 mm -Drive: 7.5 kW -Accessories: Keyless collet, tool holder, tools see photos -Dimensions: 1440/3370/H1515 mm -Weight: 2510 kg
chuck flange, flange holder, lathe chuck flange, driving flange, lathe chuck faceplate-Manufacturer: Röhm, chuck flange for three-jaw chuck, four-jaw chuck, faceplate-Type: 55021/22-6 Ø 220 mm-Bolt circle: Ø 134 mm-Hole: Short taper 6, cone Ø 103 - 106 mm-Dimensions total Ø 220 x 190 mm-Weight: 20.1 kg
Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool carriage: support carriage support carrier-Support plate: 265 x 180 mm-Dimensions: see photos-Dimensions: 290/280/H70 mm-Weight: 21.1 kg
Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed-Feed size: Ø 250 mm-Weight: 35.5 kg
