tekstil terbiye makineleri kullanılmış satılık

1 LAFER carbon brush emerising/peaching machine type ULTRASOFT TWIN TOUCH, year 2018, table width 2200 mm, 2 brushing rollers, entry and exit in the same side, plaiter exit, dust suction and filters

Roller width: 350 mmroll diameter: 110 mmRoller covering - soft rubber: 70 Grad shorerubber: NBR - Qualität air pressure: max. 4 barPressure line: 28 N / mmCapacity of dye tub: Becken - 1,3 LiterCapacity of dye tub: Zwickel - 0,3 LiterSpeed driven roll: 0-25 U/minspeed: 1 - 10 m/minvoltage: 230 V / 50 Hzdrive motor: 0,4 kWweight: 130 kgdimensions: 1050 x 800 x 810 mm• 2-roll-laboratory padder for horizontal and vertical roller-arrangement.• The change from horizontal to vertical of the roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders,• small trough• with controllable motor drive, drive for both rolls.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 MCS high temperature jet dyeing machine type DYNAMICA DYN EF 3XJ HT, 3 chamber, capacity 750 Kg, year 2014, HIDROVARIO nozzles with adjustable section, dye bath preparation tank behind the machine, 2 addition vats with mixer), TERMOELETTRONICA fully automatic dye process controller, machine fully inverter controlled

Working width: 1800 mmRoller width: 2000 mmCapacity appr.: 20 mHousing from: Edelstahl Guide rollers - dia: 127 mmWeight: 850 kgDimensions (LxWxH): 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 KUSTERS 3-bowl rolling, glazing calander type 213.50-1800 3 bowls face roller width 2000 mm, working width 1800 mm Year 1990

Working width: 2600 mmRoller width: 2800 mmNumber of rollers: 2 StückSupporting roller - dia: 295 mmRoller covering - soft rubber: 75 Grad shoreSwimming roll - dia: 240 mmRoller covering - synthetic PU: 83 Grad shorePressure line: 50 N / mmPressure total: 14 toCloth guiding system for woven fabrics: Breithalter, Leitwalze Drive side: nach Auftrag Operting side: nach Auftrag Drive shaft: dia 80 mm Hydraulic unit for separately pressure: in inox Compensator: mit pneum. Entlastung • 2-Bowl high efficiency squeezer with one Swimming Roll (S-roll),• Machine had been completely refurbished in 2007,• with drive (with GS-Motor and gear, without control) for V = 60 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 KUSTERS finishing foulard type 222.54-4600, face roller width 4.800 mm, working width 4.600 mm, the upper roller is S-roll, year 1969 and fully overhauled in 2011, AC motor with frequency inverter, entry with ERHARDT & LEIMER KF selvedge spreaders and scroll rollers, exit with banana roller and dancing roller for speed adjustment

1 BIANCALANI discontinuous active relaxation and stabilization machine for tubular or open knit type BRIO, year 2013 (only 1700 working hours) Reduction of residual spirality in tubular fabrics Flat tumbling treatment, without tensions or defects Good hand, softness, and volume

1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins

1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1989 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled

1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder

2 MEZZERA high temperature jiggers type Celsius 143, year 2003, roller width 200 cm, working width 180 cm, electronic jigger, maximum batch diameter 1150 mm, maximum dyeing temperature 140 ºC, SETEX 838 dye cycle controller, with 2 add vats (1 with mixer)

1 LAMPERTI raising machine type GB, year 1988, wire with 230 cm, 36 raising rollers, can run open width or tubular, updated with inverter to the main motor

1 RAMISCH laboratory 4-roll calander type RK 46P, face roller width 300 mm, working width 250 mm, calander indicated for following processes: rolling, glaze, friction, mate, Schreiner and embossing,  4 rollers with the following distribution (top to bottom):  steel diameter 120 mm, cotton diameter 240 mm, cotton diameter 240 mm, steel diameter 120 mm, both the steel rollers are electrically heated, linear speed adjustable up to 20 m/min., pressure adjustable up to 195 N/mm = 6 tons, unwinding from roller max. 300 mm diameter, winding to roller max. 300 mm diameter, double fabric spreader, central lubrication system to the 8 roller plain bearings, all rollers are connected through tooth wheels, friction possible and adjustable between 0 and 200%, weight of the machine 2300 Kg, dimensions width 1780 mm, depth 1250 mm, height 1600 mm

1 KUSTERS 2-bowl rolling calender type 212.70-3200, 3200 mm Working Width (3400 mm face roller width), year 1993, top bowl chromed steel (thermal oil heated) diameter 450 mm, bottom bowl Racolan (S-roll) diameter 500 mm, Pressure 300 Newton/mm = 96 tons, maximum speed 100 m/min., maximum heating temperature 250 ºC, entry with metal detector, ELECTROTEX seam detector with automatic seam passage, exit by A-frame contact winder max. 1800 mm diameter, blower for cooling the bottom roller, water cooling system for edge of racolan sleeve, cooling rollers before exit, machine is controlled through SIEMES PLC, electronic speed control through MENTOR II digital drive, voltage 380V, 50 Hz, machine supplied with spare racolan sleeve and technical documentation

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500x700 Inside drum diameter 1.500 mm, inside drum height 700 mm Machine is special reinforced execution with round base support and 4 Gleitschwinger feet

1 ALLIANCE sample high temperature jet dyeing machine, type Colora HT10 capacity 4 to 10 kg (according to the weight and composition of the fabrics)  year 1999 maximum dyeing temperature 140 ºC machine equipped with filter COMEUREG Microprog 40 dye cycle controller winch is ABB inverter controlled circulation pump is ABB inverter controlled with addition vat machine has worked very few hours and is in pristine condition

1 AUTEFA loose stock/flock stampfing press type 6.62 for stamping lose flock into materila carriers for dyeing / bleaching machines, with 2 stampfing arms with motorized rotational carrier support . complete with electrical panel

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500 x 600 inside basket diameter 1.500 mm inside basket height 600 mm

1 AHIBA laboratory high temperature dyeing machine type Turbocolor, SEDO PC1000 dye cycle controller

The Tonello G1 420 MW2 is an advanced washing machine specially designed for industry to efficiently wash and treat textiles and clothing. This offers a generous capacity to process a large amount of textiles and clothing in one wash. This washing machine is suitable for a variety of washing and treatment methods, including washing, bleaching, dyeing, enzyme treatments and much more. It can handle a wide range of materials and clothing types. The Tonello is designed to minimise operating costs while ensuring high washing and treatment efficiency. Ice can be achieved through the use of advanced technologies for water recovery, energy conservation, and automated operations. easy handling and quick commissioning. Clear control panel and clear instructions make it easy to operate and maintain the device.

1 FERRUM laboratory hydro extractor, maximal loading capacity 2 Kg, 2800 rpm

1 COATEMA UV-coating lamination line type SM31, year 2015, roller width 150 cm, HONLE device for UV coating, with MAHLO double sided scanner QMS Webpro-XS (O-frame) with measuring sensor/head for measurement of layer thickness The machine was bought new for a project which was not finalized and it has less than 200 working hours. Machine looks like an exhibition machine.

1 ARIOLI continuous steamer / ager type Mini G, year 2001, roller width 220 cm, working width 200 cm, inside fabric capacity 130 m

1 ARIOLI continuous washing machine type V21, year 2001, roller width 200 cm, working width 180 cm, 5 washing boxes, inside fabric capacity 30 m each box = 150 m

1 MCS high temperature jet dyeing machine type DYNAMICA SPRINT DYN-EF-6XJ-HT, 6 chamber, capacity 1500 Kg, year 2017, dye bath preparation tank behind the machine, 2 addition vats with mixer), TERMOELETTRONICA fully automatic dye process controller, machine fully inverter controlled

Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine is in perfect running conditions and well maintened as worked very few hours (less than 1000h). The complete lot include everything necessary to run the machine along with all perifericals and large set of spare parts for the machine. Machine is fully operational and can be visited for a test and inspection. Lot composition: 1.- Nova Jet Cleaning System for stripping rotary nickel screens. Specifications: • • Max screen lenght 3200mm Rapports available 640mm, 819mm, 914mm y 1014mm (inner brushes for all sizes, most of them new as never been used) Included with Stripping machine • Oil cooler MCO-7OB de 7kw. • Inverter ABB de 55kw • Stripping control unit. 2.- Nova Ironing machine to iron screens after stripping. Specifications: • M ...