Length: 5000 mm
Width: 100 mm
Height: 2800 mm
Year: 2011
0
Range+Heine coating system
for coating individual wooden
window components and frames
for sale on behalf of a
client
-----------------------------------------------------------
Manufacturer’s technical description:
Part
dimensions: Length: 5,000 mm
Height: 2,800 mm
Width: max. 100
mm
Coating system:
Intended use of material from the relevant
coating manufacturer with a
low solvent content (VOC value),
water-based and non-flammable.
Capacity: min. 40 crossbars/shift,
i.e. approx. 60 window units/shift
(without forced
drying)
Process (1 cycle is run twice):
- Flooding
-
Drying
- Checking and applying joint sealant
- Spraying
-
Drying
-------------- --------------------------
Item 1
Conveyor technology
1 Power + Free circular conveyor
Layout as
per drawing 11-138-010a
Essentially comprising:
3 drives with
gear motors for the main chains with
frequency-controlled speed
(see layout).
Various running rails, horizontal curves,
chains
Tensioning stations, pneumatically/electrically controlled
stop stations
50 crossbeams, 5,000 mm long (max. weight 250
kg)
Automatic tilting of the crossbeams in the drip-off area after
the
flooding system
1 conveyor system control (Siemens S7-300
PLC)
Programmable buffer stocks
Infinitely variable
drives.
1 lifting/lowering station for loading and unloading
workpieces (max. stroke 2,000 mm)
1 set of steel structure for
mounting the conveyor
system
----------------------------------------
Item 2: Flood
Coating System
1 flowcomat II-P
1 system for colourless
primer
Maximum workpiece width approx.: 180 mm
Consisting
of:
1 coating tunnel,
1 Flowcodrive swivel mechanism,
2
flood lances, each fitted with a maximum of 3 nozzles.
1 set of
accessories for cleaning the system
1 stainless steel sieve fitted
externally
1 paint supply
1 control
unit
----------------------------------------
Item 3 Additions
to the dip coating system
1 Drip channel and drip tray in the
evaporation area behind the dip coating system
After dip coating,
the crossbars run into a drip buffer.
The dripping coating
material is returned to the dip coating system via the
non-stick
PP drip tray (and drip channel).
Rinse water is collected in the
flood coating system and pumped out. The
use of PP for the areas
in contact with the coating ensures easy cleaning
of dried-on
coatings.
1 Humidification system
1 Control unit for the
humidification unit
Complete with controller for the
humidification volume
1 Hygrostat for measuring room humidity and
activating the
humidification nozzles
3 humidification nozzles
for the drip buffer
1 coagulation system
1 R+H waco 200
coagulation system – 200 l collection
tank
----------------------------------------
Item 4: Topcoat
spray booths
2 paint booths for topcoating
2 extraction walls
with sandwich panel cladding to suit the
work area.
Fan:
16,000 m³/h
Filter area:
- 3 sets of Ecola
pre-separators
- 1 set of Paintstop filters
- 1 set of bag
filters
Recirculating air distribution ceiling in a tensioned
frame design
Volume 12,000 m³/h
approx. 75% recirculation –
25% exhaust air operation
(the exhaust air volume is extracted
from the hall)
installed on site-provided foundations in
accordance with the layout
2 Prolac overspray recovery
columns
-------------------------- --------------
Item 5
Addition to the topcoat spray booths
3 humidification nozzles for
the evaporation area after
topcoating
----------------------------------------
Item 6
Dryer
19 axial fans for the drying area
1 dryer enclosure (see
layout) with sandwich
panels
----------------------------------------
Item 7
Inspection area
2 sanding walls for the inspection
area
----------------------------------------
Price of the
above machine on
request!
----------------------------------------
(Technical
specifications according to the manufacturer – subject to
change!)
All prices quoted are net, plus statutory
VAT.
The data for this ad was created with
ModulMWS - the software solution of LogoTech oHG.
