robotlar kullanılmış satılık

YASKAWA MOTOMAN GP35L industrial robot was built in Japan in 2021. This compact machine with an extremely robust body and extended reach is ideal for a wide range of applications i.e. load handling, machine operation and grinding/polishing. Thanks to its compact size and weight, it can be installed in hard-to-reach areas in a small amount of space, reducing at the same time interference with peripheral equipment. The YASKAWA robot is additionally equipped with a MOTOMAN YRC1000 controller with the ability to use extended commands and create advanced motion functions. The offered GP35L robot is brand new and has never been used. The total weight of the machine is 600 kg. Technical specifications of the YASKAWA MOTOMAN GP35L robot - number of axes: 6 - arm reach: 2538 mm - maximum payload: 35 kg - axis motion range S axis: ± 180° L axis: +135°/-90° U axis: +206°/-80° R axi ...

number of controlled axis: 6 workpiece weight: 210 kgthroat: 2697 mmtotal power requirement: kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FANUC S-420iW industrial robot was manufactured in Japan in 1996. A handling robot characterised by maximum performance and reliability has many applications in the industrial sector. The arm with a long reach of 2850 mm and a load capacity of 155 kg, together with 6 axes equipped with mechanical brakes, will meet even the most demanding challenges. The S-420i W robot has an integrated FANUC R-J2 controller, which uses advanced technology to improve and optimise overall productivity. The total weight of the machine is 1600 kg. Technical specifications of the FANUC S-420iW articulated robot - integrated controller: FANUC R-J2 - number of axes: 6 - arm reach: 2850 mm - payload: 155 kg - portable teach pendant: FANUC - motion range of robot axes J1 axis: 360° J2 axis: 142° J3 axis: 135° J4 axis: 600° J5 axis: 260° J6 axis: 720° - movement speed of robot axes J1 axis:  ...

number of controlled axis: unkt. workpiece weight: unbkt kgthroat: unbkt. mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 KR C2 robot arms with KCP2 controller. Of these, one system is complete and operational and will be in use until October 2023. There is a factory warranty for the control system with a remaining term of 20 months The other serves as a spare parts donor. The system is replaced by the successor and is fully functional.

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: 1,43 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fanuc LR Mate 100i High Speed Robot with Control It is a five-axis, modular, electrically servo-driven robot designed for loading and unloading precision machines, welding and material transport. Its hollow joint construction encloses the entire cable routing to avoid getting stuck. The FANUC LR Mate 100i also features brushless AC servo motors that minimize motor maintenance, sealed bearings and drives enable operation in harsh factory environments. Included in delivery is the control unit Mate RJ-2 Robot Specifications Axles: 5 Payload: 3kg H-reach: 620 mm Repeatability: ±0.04 mm Robot mass:32kg Movement speed of the robot J1 180 °/s (3.14 rad/s) J2 180 °/s (3.14 rad/s) J3 225 °/s (3.93 rad/s) J4 216 °/s (3.77 rad/s) J5272 °/s (4.75 rad/s) Robot Motion Range Robot J1 ±160° J2 +150° - 35° J3 +206° - 159° J4 ±120° J5 ±200° (Changes and e ...

number of controlled axis: 6 workpiece weight: Unbkt kgthroat: bis 8000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ABB IRB 140 M2004 robot (year 2005) Available: (2) complete arms + (2) units of IRC5 module transformer This unique little robot is a compact and powerful 6-axis machine with a unique combination of fast acceleration, large working area and high payload. It is the perfect choice for tasks that require short cycle times and precision, such as part assembly and light part loading and unloading. General data Robot maximum load: 5 Kg Number of axes: 6 Max reach: 810mm Repeatability: 0.03mm Controller: IRC5 M2004 robot camera speed Axis 1: 200º / s Axis 2: 200º/s Axis 3: 260º/s Axis 4: 360º/s Axis 5: 360º/s Axis 6: 450º/s Robot movement range • Axis 1: ± 360 ° • Axis 2 ± 200 ° • Axis 3 ± 280 ° • Axis 4 ± 400 ° • Axis 5 ± 240 ° • Axis 6 ± 800 ° Applications: Loading and unloading of parts, handling, measurement.

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: 1,43 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FANUC M6IB 6S (year 2006) Available: (1) M16IB + FANUC SYSTEM R J3IB Controller + console (1) M16IB + FANUC SYSTEM R J3IB Controller The FANUC M-6iB/6S is a short arm for tight, confined spaces. The robotic arm of the M6iB/6S RJ3iC is used to treat products where parts sizes and envelopes are of little concern. The M 6iB/6S can perform acute, lightweight material handling with a repeatability of +/- 0.08 mm and a maximum payload capacity of 6 kilograms. Robot Specifications Axes: 6 Reach: 900mm Repeatability: ±0.08mm Robot Motion Speed J1 - 200 °/s (3,49 rad/s) J2 - 200 °/s (3,49 rad/s) J3 - 260 °/s (4,54 rad/s) J4 - 400 °/s (6,98 rad/s) J5 - 400 °/s (6,98 rad/s) J6 - 720 °/s (12,57 rad/s) Robot Motion Range J1 ±170° J2 ±125° J3 ±155° J4 ±190° J5 ±140° J6 ±360°

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kuka industrial robot with cable panel and control cabinet

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: 1,43 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUKA Robot KR10 Control Cabinet Panel and Cable

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: 1,43 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUKA ADJUSTMENT SET KTL

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: 1,43 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kuka Industrial Robots -Switchboard -Panel KCP2 -Cable

number of controlled axis: 6 workpiece weight: 180 kgthroat: 2700 mmtotal power requirement: kWweight of the machine ca.: 1,43 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KUKA KR16-3 F -Switchboard -Panel -Cable

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

KUKA ROBOT with control cabinet, panel and cable Robot can be viewed on site

Description X axis: 1500 mm Y axis: 500 mm Z axis: 1000 mm Motors: Brushless Clamp tilting: 90 ° Approximate size of the press (tons): Up to 200 Tons Max load: 5 Kg Euromap: 67

The fully automatic robotic palletizing system is designed and manufactured by our company. Palletizing systems with robots are able to meet the needs of a very diverse sector. flour factories, Animal feed factories, fertiliser factories, cement factories, Construction chemicals plants, Legume factories, Packaged products, bagged products, Transportable Features & Benefits : • Faster palletizing, • Standard number of pallets, • labour, energy and time saving, • Correct placement by automatic tolls, • With the appropriate design of the loading sequence, high robustness on the pallet, • Arrangable in various configurations; rows of pallets with free programming, • 400-5000 package/hours performance, • From 5 to 50kg standard packages, • Space required for installation is small and flexible, • User-frien ...

Description Sprue Taker Manipulator X axis: 100 mm Y axis: 700 mm Z axis: 45°- 90° Engines: no - Pneumatic axles Gripper rotation: Yes together with Z axis Clamp tipping: No Sprue clamp: Yes Voids: 1 Gripper control: Yes Euromap 12

KUKA KR360 L280 KRC2 ed06 year 2008 -Cable -Panel -Switchboard

Description X axis: 2085mm Y axis: 1225mm Z axis: 690mm motors: brushless gripper rotation: no caliper overturning: yes Sprue clamp : no empty : 1 gripper control: no max capacity: 10 kg Euromap 12

KUKA KCP KRC4 TEACHPANEL

Description Cartesian Robot With Double Vertical Axis X Axis Travel: 2500 mm Y axis stroke Product side: 850 mm Y axis travel on sprue side: 850 mm Z axis stroke Product side: 1500 mm Z Axis travel on Matarozza side: 1500 mm Gripper overturning: 90 ° Motors: AC servo motor Euromap 12