N. 2 butti containers of approximate dimensions: 1100 x 1700 x 1100 mm Without content Auction-ID: A7-45181-46

N. 3 caissons of approximate dimensions: N°2 of dimensions: 1100 x 1700 x 1100 mm N°1 of dimensions: 1100 x 1500 x 1000 mm Without content Auction-ID: A7-45181-50

N. 2 caissons of approximate dimensions : 1100 x 1700 x 1100 mm Without content Auction-ID: A7-45181-47

Auction-ID: A1-40133-76

Equipped with: towing eye, hydraulic connection, winch, lighting Auction-ID: A1-40133-190

Equipped with: towing eye, jockey wheel, hydraulic connection, pneumatic tires, Auction-ID: A1-40133-192

Pühringer 3818 – Three-way tipper 7 t (new machine) General data • Engine type: three-way tipper • Manufacturer: Pühringer • Model: 3818 • Year of construction: 2024 • Permissible Total weight: 7,000 kg • Net weight: approx. 1,340 kg • Payload: approx. 5,660 kg • Condition: New machine Technical equipment • V-frame made of torsion-free C-profile (210 / 75 / 6 mm) • Axle cross-section: 70 mm, track width: 1,500 mm • Brake system RFA, brake 300 × 80 • Inner bridge length: 3,780 mm • Bridge width inside: 1,750 mm • Overall length: 5,450 mm, total width: 1,910 mm • Platform height: approx. 1,030 mm • Steel bridge sheet 4 mm, folded from one piece • Base side wall 500 mm height • Swing wall at the rear with central locking • Grain pusher with lever operation • Removable corner posts at the rear, front side wall removable • Strong toggle locks ...

Equipped with: lighting, support legs, Auction-ID: A1-40133-160

Pühringer Tandem Dump Truck 7523 MT – 24 t – Year 2024 (New Machine) Manufacturer: Gebr. Pühringer GmbH Type: 7523 MT Year of construction: 2024 Permissible. Total weight: 24,000 kg Net weight: approx. 8,200 kg Payload: approx. 15,800 kg 40 km/h version, tandem chassis Dimensions & Volumes Tray length: 7,500 mm Tray width: 2,200 / 2,300 mm Tank height: 1,770 mm Skip volume: approx. 30 m³ Overall length: approx. 9,350 mm Total width: approx. 2,900 mm Skip Conical body made of fine-grained steel Bathtub base 5 mm, side walls 4 mm Hydraulic rear panel with rubber seal Automatically adjustable locking Tilt angle approx. 50°, 5-stage tilt cylinder Max. operating pressure 220 bar Chassis Torsion-free parallel frame Sprung tandem unit with axle compensation (Gigant) 2-wire air brake + ALB High-speed axles 40 km/h Hydraulic support leg double-acting Rear skid plate Facilities Pu ...

Equipped with leaf springing; ring towbar; Auction-ID: A1-40132-226

8 ton tipper with 10 ton chassis equipped with recently replaced tires independent tandem axles equipped with drawbar suspension estimated own weight approximately 4000 kilos works properly equipped with hydraulic drawbar leg diameter towing eye 50mm Auction-ID: A1-40132-136

Equipped with ring tow bar; air suspension; air-braked; hydraulic selectable; twistlock change system; hydraulic valve; 40 m3 cargo box Auction-ID: A1-40132-137

Auction-ID: A1-40132-219

Tipper Tipping on cardan Stored in working order Hydraulic tailgate Grranslider in the tailgate BPW axles Slow transport Auction-ID: A3-43502-19007

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight - precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -Working length: 500 mm -Weight: 100 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 700 E-E-motor: 2.0 / 1.35 kW-Plate diameter: 700 mm-Transport dimensions: 1040/780/H1300 mm-Weight: 69 kg

Power trowel, concrete trowel, screed trowel, concrete trowel, power trowel-Manufacturer: Noggerath, hand-held concrete smoothing machine type G 950 E-Power: 2.4 kW-Plate diameter: 790 mm-Transport dimensions: 1190/1000 / H1410 mm-Weight: 87 kg

Metal detector for conveyor belts, all-metal detection system, tunnel metal detector -Manufacturer: SS Temafa, Metal Detector All-Metal Detection System -Metal detector: SS TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control: Temafa MSG 4-FF -Individual components: see photos -Dimensions: 750/530/H790 mm -Weight: 96 kg

Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg

Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed

Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators-Frequency converter-Power: 2.8 kW-Output: 42 V-Frequency: 200 Hz-Dimensions: 1160/600/H720 mm-Weight: 74 kg

Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg

Joint cutter, asphalt cutter, concrete cutter -Manufacturer: Cedima, joint cutter type CF 16.1D -Saw blade: Ø max. 480 mm -Engine: Hatz E 780U 7 kW -Dimensions: 1150/680/H920 mm -Weight: 250 kg