Üretici:
(kategori: 102)
SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, Chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-49782-500
Serial number: L2104250,Power supply - 400V/230V, 50Hz,Power 9,0 kW Auction-ID: A7-40851-4
Guide and tension spindle lathe machine - Forkardt-3 jaw chuck F 315 - Single steel holder - Bezel - Moving center punch - Feed protection, Limit switch monitored - Chip tray Turning diameter over bed 600 mm Turning diameter over support 400 mm Turning length 1000 mm Turning diameter in the offset 850 mm Speed 15 - 810 rpm Center height 300 mm Spindle bore 56 mm Total power requirement 9.0 KW Machine weight approx. 2.9 t Dimensions approx. 2.8 x 1.45 x 1.65 m Auction-ID: A7-49782-417
Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-49190-17
SAICC B26 special purpose/threading machine, made in Pavia, Italy. Older workshop machine with guards, spindle and manual controls. Exact application and operating condition to be confirmed. Auction-ID: A1-49190-44
Technical data Manufacturer: GUILD MASTER Model: CTX 400 Machine Type: CNC Lathe Control: Gildemeister CNC / ElektroPilot Operating hours: approx. 18,462 h Max. turning diameter: 400 mm (Source: online) Max. turning length: 640 mm (Source: online) Circumferential diameter over bed: 500 mm (Source: online) Spindle bore: 72 mm (Source: online) Speed range: 25 - 5,000 rpm (Source: online) X-travel: 212 mm (Source: online) Z-travel: 640 mm (Source: online) Tool turret: 12-speed (Source: online) Tool holder: VDI 30 (Source: online) Machine weight: approx. 5.1 - 5.5 t (Source: online) Configuration 3-jaw chuck Berg KH200 12-speed tool turret Powered tools available Tool turret prepared for powered tool holders Chip conveyor available Coolant equipment available Closed work area cladding CNC controller with screen Note No original technical documentation available. The technical data was r ...
including pallet with accessories Auction-ID: A1-49000-22
Serial number CK08004 CNC control, brand, type SIEMENS SINUMERIK Machine weight 5000kg Dimension L 4100mm Dimension w 1800mm Dimension h 2300mm Auction-ID: A7-49302-3006
turning diameter - 12 mm,turning length - 135 mm,approximate dimensions - 1500 mm x 770 mm x 1540 mm,machine equipped with bar feeder,machine dimensions - 2400x1200x2400,bar feeder dimensions - 4800x500x1500, Auction-ID: A7-49398-5
turning diameter over bed: 380 mmturning diameter over slide rest: 190 mmturning length: 1000 mmtotal power requirement: 4 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,8 mTraining Machine - First-HandFeatures:3-axis digital display 3-jaw chuck4-jaw chuckCollet chuckActive chuck guardCover for lead and feed spindlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical details Manufacturer: ZMM Sliven Model: C500 (Type 500) Type: Centre lathe Configuration: - Geared headstock - Large 4-jaw independent chuck - Manual quick-change gearbox - Leadscrew and feed rod - Carriage with cross slide and compound rest - 4-position toolpost - Tailstock - Electrical control cabinet - Manual controls Application: - Turning - Facing - Boring - Thread cutting - General metalworking Construction: - Heavy-duty cast-iron machine frame - Conventional manual operation Estimated swing over bed: Approx. 500 mm Estimated distance between centres: Approx. 1500–2000 mm Dimensions: - Length: Approx. 3000 mm - Width: Approx. 1100 mm - Height: Approx. 1450 mm Weight: Approx. 2500 kg Condition: Used Observed condition: - Machine appears substantially complete - 4-jaw chuck installed - Tailstock, carriage and gearbox present - Electrical cabinet installed (door detached/o ...
Auction-ID: A1-48648-47
GILDEMEISTER - CTX 310 V3 Offer details Stock number 1039-9126 Machine type: CNC turning and milling center Manufacturer: GILDEMEISTER Type CTX 310 V3 Year of construction 2003 Control 840 D Siemens Country of origin Italy Additional information CNC turning and milling center GILDEMEISTER - CTX 310 V3 - Incl. 2x reducing tubes Technical details Turning diameter 210 mm Turning length 580 mm Control 840 D Siemens Center height 190 mm Turning diameter over bed 330 mm Turning diameter above the face slide 260 mm Main spindle: Speed range - main spindle max. 4,000 rpm/-1 Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable rod diameter 51 mm C - Axis 0.001 ° Travels: Travel - x 185 mm Travel - z 455 mm Tool turret: Number of tool positions 12 pos. Tool holder VDI 30 Driven tool stations: 6 pos. Tailstock: Tailstock displacement 400 mm Sucti ...
Polygon Lathe, Multi-edge Lathe, Profilator LEO Polygon Lathe Tip height: 160 mm Lining: 150 Ø Center width: 800 mm 380 V Dimensions: 2200 x 1200 x 1300 mm https://youtu.be/4QG-Q8bJhAQ https://youtu.be/6YYCQJxWgAA Auction-ID: A7-49701-11
Lead and pull spindle lathe VEB DLZ 280 Center width: 900 mm Tip height over support: 90 mm Tip height above bed: 140 mm incl. accessories as shown ! Dimensions: 2,200 x 1,200 x 1800 mm Video: youtu.be/CeVz3o2XVus Auction-ID: A7-49701-12
OKUMA - MacTurn 50 Offer details Stock number 1039-9061 Machine type: CNC turning and milling center Manufacturer OKUMA Type MacTurn 50 Year of construction 2000 Control OSP 7000 L Storage location D-59302 Oelde Country of origin: Japan Delivery time by arrangement Freight base from location Additional information CNC - Turning and milling center OKUMA - MacTurn 50 Technical details max. turning diameter 580 mm Turning length 1500 mm Control OSP 7000 L Circumferential diameter over bed 610 mm Circumferential diameter over carriage 580 mm Main spindle: Speed range - main spindle 12 - 2,800 rpm/-1 Spindle bearing diameter 150 mm Spindle bore 110 mm Spindle nose JIS A2-11 Drive power - main spindle 37 (30) kW C-axis 0.001 ° Travels: x-axis 598 mm y-axis 230 (+110 / -120) mm z-axis 1,660 mm Feeds: Rapid traverse X / Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse ...
HITACHI SEIKI - HiTec-Turn HT 20 RIII Stock number 1039-9425 Country of origin Germany Technical details Turning diameter 450 mm Turning length 380 mm Seico 40L Multi Control Max. machining diameter 340 mm Bar passage 51 mm Speed range - spindle 30 ~ 5,000 rpm Drive power - spindle motor 11 / 7.5 kW Spindle nose A2-6 Spindle bore 59 mm Bearing diameter 100 mm Travel - x 215 mm Travel - z 400 mm Turret head (x-fold) 16 Feed rate 0.001 ~ 500 mm/min Rapid traverse X/Z: 30 m/min Shaft diameter 25 x 25 mm Shaft diameter of the drills 40 mm Tailstock Tailstock mount MK 5 Tailstock Shift 300 mm Total power requirement 23 kVA Space requirements approx. 5.5 x 2.8 x 2.2 m Accessories Documentation Chip conveyor Tailstock Signal Lamp Parts removal Tool measuring arm Workspace lighting Tool holder (turret) Auction-ID: A7-49608-20
turning diameter: 140 mmturning length: 615 mmcontrol: C200-4D spindle passage: 65 mmMain spindle: turning speeds: 5.000 U/minmax. torque at 40% / 100% load: 145 / 105 kWturret-slide: 1,2 und 3 x-travel: 110 mmz-travel: 360 mmy-travel: 70 mmrapid traverse X/Y/Z: 25/12/45 m/minOpposed spindle: slide travel X-axis: 150 mmZ- Travel: 600 mmturning speeds: 5.000 U/minB - axis: B-Korrekturachse +/- 1 °tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 °total power requirement: 61 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 9,75 x 3,10 x 2,85 mLoading:Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm)Unloading:BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007The data for th ...
turning diameter: 275 mmturning length: 900 mmcontrol: TRAUB TX8i-s spindle passage: 65 mmspindle turning speed - stepless: 1 - 5.000 U/minspindle diameter in front bearing: 110 mmC-axis: 1 - 500 U/minx-axis: 175 mmz-axis: 650/975 mmy-axis: +/- 40 mmrapid traverse X/Y/Z: 20 / 40 / 20 m/minfeed capacity X/Y/Z: 5,5 / 5,5 / 10 kNtool turret - number of stations: 10 number of driven tools: 10 mmtoolpiece turning speed range: 1 - 6.000 U/minpower capacity at 25 % load: 5,50 kWmax. torque at 25% load: 17,50 Nmtool taper DIN 69880: Ø30x55 spindle diameter in front bearing: 110 mmtotal power requirement: 95,00 kWweight of the machine ca.: 16,00 tdimensions of the machine ca.: 10,00 x 3,50 x H3,00 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-axis digital readout brand SINO, Quick-change tool holder type Multifix TOOB2 with 4 boats, Camlock D1-5, 3-Jaw chuck 200 mm, 4-Jaw chuck 200 mm, Clamping plate 250 mm, Fixed and running glasses, LED work light and cooling system, Electric brake CE, Foot brake, Box with various tools, Manual with parts list, Lathe is on original pallet Auction-ID: A1-48552-55
turning diameter: 1000 mmswing dia.: 1000 mmZ-axis stroke: 900 mmcontrol: Siemens 840 D tool taper: SK 50, VDI 60 tool piece magazine with: 44 Plätzenworkpiece weight max.: 35 kgtool length - max.: 500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-axis digital readout brand SINO, Quick-change tool holder type Multifix TOOB2 with 4 boats, 3-Jaw chuck 200 mm, 4-Jaw chuck 250 mm, Clamping chuck 350 mm, Fixed and running glasses, LED work light and cooling system, Electric brake CE, Box with various tools, Manual with parts list Auction-ID: A1-48552-114
This lathe is defective, so repair is necessary, fixed head is supplied separately Auction-ID: A1-48552-60
: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine is equipped with: - chip conveyor - part conveyor - tooling as showed in pictures - live tooling - pallet with parts - oil mist filter Auction-ID: A1-49370-20
Machine is equipped with: - chip conveyor - tail stock - mist filter - set of 12 tools (may differ from the photo’s) - jaws in pictures Auction-ID: A1-49370-17
Operating voltage: 380 VFrequency: 50 HzControl voltage: 220 VRated current: 20 ATip length: 1000 mmCenter height above bed: 250 mmTurning diameter over bed: 500 mmCenter height over support: 150 mmTurning diameter over support: approx. 300 mmSpindle passage: approx. 58 mmThe machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck FORKARDT, diameter: 200 mmalso a two-axis digital display from the manufacturer HEIDENHAINSpeed: up to 2500 rpm Auction-ID: A7-49089-410
Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-49302-3001
2.599 € 
