Kanal açma makinesi

max. ram stroke: 2 - 300 mmgroove width: 2 - 32 mmpower capacity: 8 kWno. of strokes: 2 - 300 Hub/minthroat: ca. 300 mmMax. installation height: ca. 450 mmautomatic feeds: 0,01 - 0,15 mmwork speed: 0 - 30 m/minreturn speed: 30 m/minweight of the machine ca.: 2,2 tdimensions of the machine ca.: 2,5 x 1,5 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Frömag A18 stroke: 1.800 mmswitchgear cabinet: in 2000 neu weight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 6-22 mmdrawing length: 240 mmworking speed: 10/19 m/minwork height max.: 1250 mmtable:: 450 x 350 mmtotal power requirement: 3,2 kWweight of the machine ca.: 650 kgdimensions of the machine ca.: 1250 x 700 x 1300 mmKeyway Drawing Machineincl. tool cabinet with various accessoriesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 23046 stroke: 320 mm: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: akk90273 groove width: 3 - 63 mmstroke max.: 600 mmfeed: total power requirement: 8,77 kWweight of the machine ca.: 1,9 t: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: 300 mmweight: 900 kgYear: 1975 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

slot-milling length: 300 mmgroove width: 34 mmweight: 300 kgcutting speed: 6 m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 50 mmdrawing length: 500 mmpulling force - max.: 20 to.table:: 500 x 400 mmwork speed: 1000 mm/minDrive: 4,5 kWgroove width: min. ca. 6 mmweight of the machine ca.: 1500 kgdimensions of the machine ca.: 1800 x 500 x 1600 mmElectric 380 Volt: Tool cupboard with div. tools: 1000 x 800 x 850 mmElectric 380 Volt: Working platform: Hydraulic vertical keyseating machine mounted on underframe with working platform. Stroke length adjustment, hydr. adjustable lifting movement, tension adjustment.Can be used with drawing needles and broaches. Tool cabinet with lots of accessories and draw knives.Knife guide rods with external/internal dimensions: 15/8, 25/15, 30/15, 40/22, 70/37 mm. This means the smallest hole into which the existing knife guide rod fits = 16 mm.Dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

MALMEDIE DIE Adjustable drawing speed with inverter • Minimum worked diameter 15 mm • Maximum worked diameter 25 mm • External dimension coils 1,250-1,300 mm • Internal dimension coils 800-900 mm • Length 700-1,300 mm • Weight 1.500 Kgs • Wire surface treatment bonderized with soaped • Tensile resistance approx 500 N/mm2 The drawing machine normally work the raw material over mentioned with the follow specification: • Number of drawing passage 1 • Drawing die sizes 120x45 mm • Lubricant now used oil • Max area reduction 6 to 8 % • Drawing speed adjustable with inverter

specifications: - Slot width 3 to 40 mm - max. groove length max. 250 mm - Bore diameter 13 to 300 mm - Working speed 17 to 57 strokes/min - Table size 500 x 500 mm - Working / operating height 1150 mm - Drive 400 V / 2.2 kW - Coolant device - Space requirement approx. W 1100 x H 1400 x D 900 mm - Weight approx. 950 Kg

groove width: 3 - 90 mmdrawing length: 430 mmworking speed: 4 - 12 m/minslot-milling length: 400 mmreturn speed: 15 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 1,3 x 1,7 x 1,5 m• div. pull broaches and guidancesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 90 mmdrawing length: 75 - 400 mmcutting speed: 4 - 12 m/minreturn speed: 15 m/mintable-size: 680 x 430 mmvoltage: 380 Vtotal power requirement: 5,5 kWweight of the machine ca.: 1,4 + 0,6 tdimensions of the machine ca.: 1,40 x 0,70 x 1,30 mCupboard with accessories: 1,40 x 0,55 x 1,60 m- Serial-No.: 62855 / 8700- Cabinet complete with the following accessories: - Drawing knives - Knife guide rods - knife rods - feed wedges - Centering step bushes - clamping piecesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.