Hidrolik güç üniteleri

Hydraulic agregate with Bob and cooling, engine made in Swden 55kW, cubic capacity 300 dm per min, pressure 31,5 MPa, transport weight ca. 800kg. Ready for work.

S03- A ( 2pcs. ) BOSCH 3 pumps, 2xkonst. No. 1517222370 / 0510715004, 1 x Adjustment. 2517300000 Vn=17cm3/U, 70bar; little used 4/a directional control valve R250 768, pressure regulator, 2 pressure gauges up to 100 bar or up to 400 bar, oil cooler, hydraulic accumulator, motor 5.5 kw, 1400 rpm, oil level indicator. Tank approx. 60lt. Dimensions: Length : 100cm; Width : 55cm ; Height : 80cm; Weight: Price per piece Others on request !

feed pressure: 0 barliter capacity: 0 lpower capacity: 4 kWoperating pressure: 150 bar: weight of the machine ca.: 200 tdimensions of the machine ca.: 1,1 x 0,7 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

#4779 - HYDRAULIC POWER PACK WITH OIL COOLER Manafacture: Flutec Type: ÖK-1S3/1.0/M380-50 Year of construction: 1984 Motor power: 0.55 kW

Hydraulic

Technical data - see signs and under HAWE Hydraulik Used for: - Clamping systems and tool magazines in lathes - Test bench construction .. suitable for: continuous operation, short-term operation, periodic intermittent operation ( Used device ! - no warranty )

Key data: 700 bar, 3 kW

Hytorc High Pressure Hydraulic Pump 700bar, 400V, 3kW with Test Certificate High Pressure Hydraulic Pump Manufacturer: Hytorc Seis GmbH Type JetPro 18.3-4T with integrated, electrically ventilated hydraulic oil cooler. Printed test certificate from 2018, then no longer in use! The hydraulic power unit was used to transport turbine shafts weighing several tons to a hydraulic oil cushion to rotate smoothly and easily. For example, turbine shafts were tested for concentricity and damage. The article is available multiple times.

S03-C Mason, 7,5KW, 380V, Pump : Rexroth 1PV2V3-30/40 RA01MC 63A1 , 1/80. Hydr. Block for 4 valves, 2 4/3 directional control valves, electric. , tank approx. 170lt., dm.; 95 x 60 x 80cm Possibly also with bending tool, bending cylinder! See photos.

feed pressure: . barliter capacity: . lpower capacity: . kWtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact usThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 90 l/mintank contens: 100 lvoltage: 220 / 380 Vtank dimensions ca.: 800 x 380 x 400 mmheight with motor ca.: 900 mmpower capacity: 2,2 kWweight: 57 kgCondition: unchecked: Base: 820 x 390 x 650 mmThe capacity liter is estimated because on the type of the motor is model KMR 90 L 4.Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 15 bar

Article number: 27-06-093 Manufacturer: Parker Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.2002 L x W x H: ca.700x800x1600mm Weight: approx. 300kg Max. pressure: approx. 15 bar Volume: approx. 90 dm3 Accessories  Mahle Industrial Filters

Key data: 100 bar

Article number: 27-06-132 Manufacturer: Rexroth Very good general condition Hydraulics ran without defects until dismantling, suitable for Weisser Multivertor, among others Shipping time: All rights reserved. Year of construction: ca.1998 L x W x H: approx. 1200x600x1400 Weight: approx. 120kg Volume: approx. 100dm3 Max.pressure: approx. 100bar Tank capacity: approx. 200 liters Other accessories on request Price and other technical data on request

Hydraulic power pack 22kW - year of construction: 1989, type HC 9, with MOOG pump 88 L / min, 130 bar, oil tank 320 L, 1, 5kW compensation pump and oil cooler equipped with.

feed pressure: . barliter capacity: . lpower capacity: . kWtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact usThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 200 barliter capacity: 250 lweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mmtable width: 800 mmstroke height: 1010 mmweight max. in kg: 1000 kg: 190 mmconnected load frequency: 380 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,22 tdimensions of the machine ca.: 1,3 x 0,8 x 0,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.