incl. 20 m roller conveyor, brand Laeisz & Lüders, with new S7
control unit (Teyfel) from the year 2015, Process for Big Bag
filling:, - You program the desired setpoint on the big-bag scale., -
On the roller conveyor 3.1 empty pallets are placed on and moved over
the button, Palette” acknowledged on an external control unit., -
The empty pallet is driven onto the scale of the roller conveyor 3.2
and the BigBag scale is tared to zero, - An empty big bag must be
hooked into the load hooks and the, Fill nozzle pulled over the puff
hose on the fill pipe (external switch S6), Expansion hose., - The
Start Big-Bag button starts the filling:, · The filling head moves to
the top position, · The filling flap opens and the dosing chute feeds
in the coarse/fine flow the, Target quantity in the big bag, · After
reaching the fill level, the fill flap closes., · Open the load hooks
and deflate the inflation hose., · By pressing the switch Big-Bag
Disposed the full Big-Bag is, moved the roller conveyor 3.2 to 3.3 for
manual closure., · After manual closing, the pallet is moved to line
1 via the Big-Bag Unbound button., Process carton filling:, - You
program the desired setpoint on the big-bag scale., - Place empty
cartons on the roller conveyor 5.1., - The fill pipe is positioned
above F6350968 the empty carton, - Press the Start Karton button to
start the filling:, · The carton is connected via the pneumatic brake
hose underneath, Roller conveyer 5.2 locked., · The filling flaps Y1
and Y2 open and the dosing groove feeds in coarse, /Fine flow the
target amount into the carton., · After reaching the filling level,
close the filling flaps and the, Brake hose vented., The operator
pushes the full carton into the sealing machine., · The closing
machine is actuated via a potential-free contact,, if the operator
presses the Seal carton button.
Almanya
willich 
