Dokunma makineleri

thread capacity: -M 3,5 thread pitch: x mmthroat: 100 mmtable-size: 180x180 mmweight of the machine ca.: 0.140 twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24035 Specifications: - Tapping capacity approx. M 3 - M 10 - Working range ( swivel radius ) approx. 1600 mm - Speeds up to 700 rpm - Quick-change tool holder size 2 diam.31 - Various inserts for quick-change tool holder - Pneumatic connection 6 - 8 bar - Table height work table approx. 850 mm - Work table can be driven under with pallet truck - Bench drill LEMATEC type TB 13 - Drilling capacity 13 mm - 5 speeds 515 - 2580 rpm - Space requirement approx. W 1300 x H 1800 x D 900 mm - Weight approx. 280 kg

BLUETECH GEWINDESCHNEIDMASCHINE TYP BHK03 â Capacity M5-M36 â Hydraulic â Plant area 2050 mm â Kop is draaibaar â Snelwisselopname â Traploos instincatable tapsnelheid â Traploo's instalable terugloop snelheid â Digital toerental uitlezing â Inclusief 12 tappotjes â Zware werktafel met T-sleuven â Smeersysteem met manuele of automatic functie â Noodstop â Documentatie â 400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Offer 24033 Specifications: - Tapping capacity M 3 - M 24 - Working range ( swivel radius ) 1800 mm - Infinitely variable speeds up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - Various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Technical data: - Threaded drilling capacity approx. M 3 - M 16 - Speed range up to 500 rpm - Working range ( swivel radius ) 2500 mm - Tool quick change holder size 2 diameter 31 - various inserts for tool quick-change recording - Table area with 5 T-slots 2050 x 900 mm . Table height 910 mm - Machine vice with jaw width 200 mm - 3 jaw chuck 250 mm - Pneumatic connection with pressure reducer - mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Offer 20142 Specifications: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed Ab + Auf infinitely variable - Projection 90 mm - Spindle speeds up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - Drive 400 V / 0.75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

specifications: - Threaded drilling capacity approx. M 3 - M 12 - Unloading up to approx. 500mm - Stroke to approx. 600mm - Speeds approx. 80 - 1000 rpm - 2 St. spring pulls / balancers - Pneumatic connection 6 - 8 bar - mobile underframe - Space required approx. W 1000 x H 2000 x D 800 mm - Weight approx. 80 kg

Offered out of insolvency is a ready-to-use tapping machine Manufacturer: Flott Model SB 15 GL Built in 1989 Masch.No.34177063 Specifications: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Projection 200mm Chuck Bilz WFP 1 + inserts Drill chuck Röhm 0-10mm Foot switch Digital display Pinolhub Single continuous cycle Emergency stop Speeds from 80-3150rpm 380 volts Motor power 0.75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs lead screw--pitch-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions Weight approx. 200kg

Dimensions (L/W/H): 660x1050x1600 mmmetric thread: M 33 Messingmetric thread: M 16 Gußeisenmetric thread: M 14 Stahlno. of flutes: 25x10mm 2x T-Nutenthroat: 220 mmweight: 730 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tapping machine Hagen & Göbel HG 16 C 12/16 1.950 € VB Pick-up only 39114 Saxony-Anhalt - Magdeburg 01.03.2023 3 Description Offer Tapping machine Hagen & Göbel HG 16 C 12/16 with coolant tank/pump without quill guide spindles and the tool holders (Fig. 1-6) The machine is sold to our customer due to a business change. It is operational and functional as far as it works. Manufacturer: Hagen & Goebel Soest Type: verm TB C 12/16 Ref. 2226 Year built:1993 Cutting capacity: depending on the material 4-56 mm at 14-28 m/min see performance plate Drive power: 3AC 380 V, 41.1/7.1 A 1.2 kWQ Engine: KBA 100 A 6 Coolant tank: approx. 25 l gesch. Cooling center pump: TB40/220-x 380V, 0.25 A, 12 kW, 2700 1/min, 50 l/min Accessories: no Dimensions: approx. HxWxD 1500 x 990 x 1400 mm Weight: approx. 750 kg estimated Condition: used see photos The machine is stil ...

Guide cartridges for Hagen & Goebel tapping machines Machine type HG6 Original price at the manufacturer 322.-€ net. I offer them the guide cartridges at half the original price. There are several inclines, please inquire about the required incline.

Specifications: Tapping capacity M 10 – M 45 Cutting capacity in ST M 36 Recording MK 2 Motor power 4 kW Speeds 35 – 185 rpm

Threaded drill M1 - M10 Motor 0, 22 + 032 kW Engine rpm 1420/ 2770 Spindle RPM 480-580 Weight 100 kg

Drilling Ø 15/18 mm Table size: 220 x 285 mm Projection: 215 mm Spindle speeds: 480 - 3800 rpm Operating voltage: 380 V Total power requirement: 0.55 kW Dimensions: 930 x 700 x 1770 mm Weight: 128 kg

Key data: 16 , 120 mm

Tapping machine M3-M16 (Steel) used Synchro Tapper STC-P316 is a mechanical feed tapping unit with a total stroke of 120 mm. Interference between fixtures and peripherals is effectively avoided by design and the cutting tool can be easily replaced. In addition, idle time during the tapping process will be significantly reduced by equipping an automatic switching mechanism for fast forward/lead feed auto-switching. The machine can be viewed at any time. Shipping possible at short notice throughout Europe

TAIPU THREAD CUTTING MACHINE TYPE TP 1800-16 P -Capacity M2-M16 -Pneumatic -Work area 1800 mm -AufnahmeÃ? 19 mm -Speed 350 RPM -Without clamping table PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TAIPU THREAD CUTTING MACHINE TYPE TP 915-12 P -Capacity M2-M12 -Pneumatic -915 mm working area -AufnahmeÃ? 19 mm -Speed 350 RPM -Without clamping table PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Condition used a lot of shots. See pictures

- Table size: 260 x 290 mm - Spindle holder: drill chuck - Coolant device: yes - Total power: 0.55 kW - Machine weight: 380 kg - Space requirements (W x D x H): 0.8 x 0.7 x 1.8 m Details well-maintained machine immediately ready for use Accessories Various guide cartridges, incline: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25