metal çalışma makineleri / freze makineleri / Evrensel diz tipi freze makineleri
Üretici: DMG MORI
model:DMP 35
Makine türü: Evrensel diz tipi freze makineleri
İlan No.: 170317009
miktar: 1
tarih: 14.10.2026
yer:
Almanya
fiyat:
Seller-item-No.:051492
| General | |
| High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 350 mm |
| Cross | 420 mm |
| Vertical | 380 mm |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 60000/60000/60000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 60/60/60 m/min |
| Integrated swivel rotary table simultaneous | Integated swivel rotary table DMP 35 version 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 6-channels Inclusive So |
| Tool magazine 25 places | Tool magazine 25 places (suitable for inclusion in the tool spindle) Max. tool length 150 mm Chip-to-chip time 1.6 sec Note: machine width increases to 1410 mm! |
| Spindle speed 24,000 rpm | Spindle 24,000rpm with tool taper ISO 7388-2 - J30 BT30 / BBT 30 (BIG PLUS) possible for pull-studs ISO 7388-3 - JD30 (MAS 403-45°) at spindlespeed higher than 20.000 rpm BBT 30 (BIG PLUS) stipulated! AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spin |
| Production package band filter ICS 40bar | Production package Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200 L (DMP 70) // 170 L (DMP 35) Flushi |
| Air blast through spindle centre | Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible! |
| Oil and emulsion mist separator | Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h |
| BLUM Precision package | Blum Precision package suitable to milling spindle including: Touch probe TC-52 Infrared Tool length and diameter measuring BLUM LC50 automatically cleaning through external airblast Calibration tool with taper Measuring cycles |
| 3D Quick SET | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe) |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| Standard Automation Interface right | Automation interface right according to DECKEL MAHO Standard consisting of: Interface (Profibus) via M65; Automatic loading door right; Working table with 6-channel rotary joint; 4-chanel enegry supply to machine table for (3-Axis-Machines) |
| Manual control panel | Electrical handwheel |
| DXF Reader | DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours |
| One free M-function | One free M-function M20 potential-free on contact inside electrical cabinet |
| Execution of automation interface as PROFINET | Execution of automation interface as PROFINET version Just available in combination with the standard automation interface |
| MPC Machine Protection Control | MPC Machine Protection Control Machine protection by quick shutdown |
| Clamping pneumatic, two circuits | Clamping pneumatic 2-circuit Safety requirements see long text! |
| Vesion rotary joint, 6 channels, | Version rotary joint, 6x PN 6 channels usable for air for integrated swivel rotary table with torque drives Including fix plate and fast coupling at machine side |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
