Dairesel soğuk testereler

– Saw blade 400 mm – Double mitre – 4 pneumatic clamps – Hydrocheck system – Automatic protective cover – Fog lubrication system – 1 roller conveyor 300 cm – 1 roller conveyor 300 cm with length stop – Blowgun –Documentation – 400V

saw blade diameter: 450 mmcutting diameter: 150 mmstroke: 1300 mmControl: cutting range: 140x140 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300 mmcutting diameter: 102 mmcapacity 45 degrees: round: 95 mmcutting range rectangle: 140 x 65 mmCapacy 45°: rectangle: 90 x 70 m/min.turning speed range:: 33 + 66 UpMtotal power requirement: 1,1 / 2,0 kWweight of the machine ca.: ca. 200 kgdimensions of the machine ca.: 0,57 x 1,04 x 1,83 mCondition: good: Electric 380 Volt: Base unit: rollbar Double-parallel-clamping stick: Cooling equipment: Electric 380 Volt: Member of the association of German machine tools dealers FDM and machinedealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 235 mm

used, functional

dimensions of saw-blade: 250 mmcutting range: 80,0 mmcapacity 90 degrees: square: 70 x 70 mmcapacity 45 degrees: round: 80,0 mmcapacity 45 degrees: square: 60 x 60 mmwork height max.: 900 mmsaw blade turning speeds: 20 / 40 U/minengine output: 1400 / 2800 U/min.total power requirement: 1,1 kWweight: 175 kgrange L-W-H: 550 x 950 x 1800 mmFurnishing :- manual cross-cut/cold circular saw- for cutting profiles, pipes, solid materials- manual vice with star handle- including miter adjustment- ergonomic control handle- Pole-changing drive motor- 1x BEWO feed roller conveyor- Coolant device- Machine base Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9164089The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition

saw blade diameter: 275 x 2.5 x 40 mmcutting diameter: 90.0 mmcapacity 90 degrees: flat: 140 x 70 mmcapacity 90 degrees: square: 80 x 80 mmcapacity 45 degrees: round: 70.0 mmcapacity 45 degrees: flat: 90 x 80 mmcutting speed: 40 / 80 U/mintotal power requirement: 1.2 / 1.4 kWweight of the machine ca.: 250 kgdimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition ()Furnishing:- manual cold circular saw- Column-guided saw head- one-sided miter adjustment over mounted turntable Material support table with degrees- mobile machine base- Pole-changing motor (2x cutting speeds)- manual cutting/lifting version- manual material tensioning- 1x circular saw blade- 1x material stop Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9164093The data for this ad was created with ModulMWS - the software solu ...

Key data: 300 mm

From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts

Circular saw semi-automatic in very good condition and fully functional. Equipment: • Feed speed infinitely variable • Feed actuation hydropneumatic • Pneumatic material tension • Spray and coolant device • Protective hood electr. locked • Miter adjustment infinitely variable 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

cutting diameter: 440 mmweight of the machine ca.: 780 kgmiter: feed: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

saw blade diameter: 450/500 mmcutting diameter: mmstroke: mmtotal power requirement: 3,6 kWweight of the machine ca.: 1130 tdimensions of the machine ca.: m- Circular saw - semiautomatic- hydraulicThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 400 x 30 mmcapacity 90 degrees: flat: 345 x 70 mmcapacity 90 degrees: square: 140 x 140 mmcapacity 45 degrees: flat: 280 x 30 mmcapacity 45 degrees: flat: 240 x 70 mmstroke: 240 mmsaw blade turning speeds: 6 / 12 / 24 / 48 n/minwork height max.: 1000 mmengine output: 3,0 / 3,6 kWweight of the machine ca.: 1150 kgrange L-W-H: 1000 x 1330 x 1860 mmFurnishing:- electro-hydraulic semi-automatic cold circular saw- EISELE front control panel- robust and stable machine base- continuously adjustable feed speed of the saw blade- front guard / foldable- Drive via worm gear including EISELE rotation compensation”- comfortable miter adjustment in both directions via large turntable- suitable for the use of Ø 400/425/450 saw blades- hydraulic material tension- Pole changer motor for the gear stages- Coolant device- User m ...

dimensions of saw-blade: 350 x Ø 40 x 3 mmcutting range: 120 mmcapacity 90 degrees: square: 100 x 100 mmcapacity 90 degrees: flat: 170 x 100 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 95 x 95 mmcapacity 45 degrees: flat: 120 x 100 mmcapacity 60 degrees: round: RE 100 mmcapacity 60 degrees: square: RE 85 x 85 mmcapacity 60 degrees: flat: RE 85 x 100 mmwork height max.: 900 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6,0 - 8,0 bartotal power requirement: 1,4 / 1,9 kWweight: 340 kgrange L-W-H: 1010 x 765 x 2175 mmFurnishing :- semi-automatic vertical cold circular saw- Pneumatic quick clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment- Convenient stroke adjustment of the saw unit via clamping levers- Generously dimensioned gears- with Eisele rotation compensation for a long saw blade service life- Convenient saw blade chang ...

dimensions of saw-blade: Ø 320-350 x 3.0 mmcutting range: 120 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 90 degrees: flat: 200 x 90 mmcapacity 45 degrees: flat: 140 x 90 mmwork height max.: 925 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6.0 - 8.0 barengine output: 1400 / 2800 U/min.total power requirement: 2.0 / 2.6 kWweight: 470 kgrange L-W-H: 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition ()Furnishing :- semi-automatic vertical cold circular saw- pneumatic material quick-clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment with fixed stops- Convenient stroke adjustment of the saw unit using a clamping lever- Generously sized gearboxes- with Eisele rotation compensation for long saw blade service life- Convenient saw blade change- High productivity with minimal space requirements (less than 1 m²)- Coola ...

saw blade diameter: 350 x 4,0 x 25,4 mm mmcutting diameter: 120 mmweight of the machine ca.: 150 kgspeeds: 4400 U/minvoltage: 400 Vtotal power requirement: 5,5 kWdimensions of the machine ca.: TBH 1,3 x 1,0 x 1,8 m• Metal cutting saw (with cutting disc 350 x 4.0 x 25.4 mm steel)• Miter cut• Robust commercial and industrial design• Separation area max. 140x90 mm• Cutting disc diameter 350 mm x 4.0 x 25.4 mm• Power machine with (5.5 KW) 5,500 W drive cable,• Includes 3 pieces of cutting discsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

saw blade diameter: 1250 mmcutting diameter: 380 mmcutting range: 480x320 mmmotor speeds:: 3000 U/minfeed speeds: 1000 mm/minmain drive motor: 112 kWchip conveyor: cutting speed: 10-265 m/mintotal power requirement: 125 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: Ø 15 - 100 mmsawing motor: 11 kWsaw speed: 30-130 U / minhydraulic motor: 2,2 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW Siemenssaw-blade dia.: Ø360 x T2.6 x 2.25 x 40 mmcutting range min.: 3000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2900 x 7400 mbarrel diameter: mmbarrel diameter: mmSaw speed: rpm /minweight of the machine ca.: 4900 kgGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 30 - 160 mmSaw Body: 30 Grad Linear Schlitten sawing motor: 15 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 30-120 rpm /minsaw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mmcutting range min.: 1600 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kgrequired space: mGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 30 - 160 mmSaw Body: 30 Grad Linear Schlitten sawing motor: 15 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 30-120 rpm /minsaw-blade dia.: Ø480 x 2,25 x 2,7 x 50 mmcutting range min.: 1600 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl weight of the machine ca.: 5550 kgrequired space: 3200 x 7600 mEmail us now at kontakt@atmh.deGERD WOLFF GLS-160High-performance circular sawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combinegerman with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mmsawing motor: 30 kWhydraulic motor: 5,5 kWSaw Feeding Servo: 3 KW SiemensMaterial Feeding Motor: 3 KW SiemensSaw speed: 30-80 rpm /minsaw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mmSaw speed: 30-80 rpm / U pro minweight of the machine ca.: 9000 kgGERD WOLFF GLS-250High-performance circular SawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 140 - 250 mmsawing motor: 30 kWhydraulic motor: 5,5 kWSaw Feeding Servo: 3 KW SiemensMaterial Feeding Motor: 3 KW SiemensSaw speed: 30-80 rpm /minsaw-blade dia.: Ø750 x 3,8 x 3,2 x 80 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 3500 x 8000 mmSaw speed: 30-80 rpm / U pro minweight of the machine ca.: 9000 kgGERD WOLFF GLS-250#High-performance circular SawFrom 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mmsawing motor: 11 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 70-160 rpm /minsaw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 mweight of the machine ca.: 3500 kgGERD WOLFF GLS-75High-performance circular sawFrom 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity: Ø 10 - 75 mmsawing motor: 11 kWhydraulic motor: 3 kWSaw Feeding Servo: 1,5 KW SiemensMaterial Feeding Motor: 1,5 KW SiemensSaw speed: 70-160 rpm /minsaw-blade dia.: Ø285 x 2,0 x 1,7 x 32 mmcutting range min.: 1000 mmcutting range max.: 7000 mmcontrol: Siemens hydraulic: Rexroth Valve coolant: Pulverisiertes Schneidöl required space: 2950x6800 mweight of the machine ca.: 3500 kgGERD WOLFF GLS-75#High-performance circular sawFrom 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease.Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Key data: 230 mm

- Mitre cut: 90 -/+ degrees - Clamping range: 90 mm - Speed levels: 36 / 72 m/min - Saw blade diameter: 230 (max. 250) mm - Total power: 0.75 kW - Machine weight: 180 kg - Dimensions (W x D x H): 0.8 x 0.6 x 1.6 m - Condition: good Details Miter, automatic pneumatic clamping

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

saw blade diameter: Ø 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 315 x 40 mmstroke: 150 mmcutting speed: 10 - 30 m/mintotal power requirement: 1.8 / 2.7 kWweight of the machine ca.: 850 kgrange L-W-H: 1200 x 1000 x 1700 mmFurnishing:- robust cold circular saw with powerful drive- electro-hydraulic metal circular saw - underfloor Underfloor = saw blade delivery from below- electro-hydraulic material hold-down device manual fine feed- Miter adjustment on both sides via large turntable including analogue degree display- continuous feed adjustment of the saw blade- all gears are hardened and ground- entire gearbox runs in an oil bath- all bearing points have rolling bearings- pole-changing motor- Proven guidance of the saw blade in a strong pivot bearing- Discharge roller conveyor including fastening- User manual (PDF) Machine link:- ht ...

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting range - square -: 120 x 120 mmcutting range - flat -: 300 x 40 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 245 x 40 mmmitter cutting - all-position: 90 °cutting speed: 13 / 25 m/mincontrol: minipos 807 total power requirement: 4,3 kWweight of the machine ca.: 850 kgdimensions of machine L x W x H: 1,20 x 1,20 x 1,82 mAccessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmmiter: . : Kühlung weight of the machine ca.: 1 tnumber: 4 Stück The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting speed: 30 - 130 m/mintotal power requirement: 1,5 / 2,6 kWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10 / 20 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,45 x 1,20 x 2,00 m- mitre cutting +/- 60 ° with DRO -Accessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Saw motor for Kaltenbach saw KKS 400 Engine was newly stored and front bearing plate renewed. Has been used as a replacement in maintenance. Motor repaired thus as new.

Saw blade diameter: 400 mm Sawing capacity: 130 mm round / 120 x 120 mm square Saw adjustment: 45º left/right Saw steps: 13/17/25 mtr. per min. Main engine power: 2.7 kW Country of origin: Germany Machine weight: 900 kg Machine LxWxH: 1080 x 900 x 1760 mm

cutting diameter: 260 mmserial number: 109967 volt: 380 Vfrequency: 50 Hzweight of the machine ca.: 500 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length measuring system L-40NC suitable for Kaltenbach circular saw KKS 450 (please request KKS 450 separately) Directly from the customer used from CH-Oberrohrdorf available.

saw blade diameter: 380 mmpneumatic clamping: ja weight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Aluminum circular saw machine Manufacturer: KALTENBACH Model: TL 200 Condition: good Offer type: used machine Specifications: Cutting range: Ø 55 mm, Leaf Ø: 200 mm Drive type: el./mech. Drive: 0,75 kW, 400 V Remark: portable Weight: 50 kg The machine is in a good and immediately ready for use condition and can be visited and demonstrated with us. We would be pleased if our offer finds your interest. Errors, changes and prior sale excepted.

Used cold circular saw Internal machine number m3331 Manufacturer Kaltenbach Type TL 500 Ma.Number 14238 Year of construction unknown Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as e.B. technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk to the buyer, this also applies to a shipment on our part, which we have carried out ...

saw blade diameter: 425 mmcutting diameter: 130 / 140 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 260 x 80 mmcutting speed: 11 / 22 m/mincapacity 45 degrees: flat: 180 x 80 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmwork height max.: 1050 mmDrive: 1,6 / 2,5 kWweight of the machine ca.: 1160 kgdimensions of the machine ca.: 1,25 x 1,2 x 1,9 mCondition: ready for operation: Video available on our website.: Electric 380 Volt: Cooling equipment: Chip protect bonnet: saw blade: 400 mmSemi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice.Semi-automatic operation means:1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material.Infeed roller conveyor 2000 mm and discharge roller conveyor with sto ...

saw blade diameter: 315 mmcutting diameter: 95 mmcutting capacity - round: bei 90° / 95 mmcutting capacity - square: 95 x 95 mmcutting capacity - round: bei 45° / mmcutting capacity flat: 140 x 80 mmcutting capacity - square: 45° / mmsaw blade speeds: 33/60 p. min.Drive: 1,3/1,8 kWweight of the machine ca.: 300 kgdimensions of the machine ca.: 700 x 1000 x 2050 mmCondition: ready for operation: Electric 400 Volt: Cooling equipment: Roller conveyor with measuring stop: 3000 mmSemiautomatic: Function as follows: 1. clambing material. 2-hand start: material sawing, 3. material ease. 4. Sawing unit goes back in starting position. Cooling equipment in the base, pneumatic high-speed tensioning arrangement workpiece, durable transmission, vertical guidance in dove tail guidance, mitre cuts of 45° left to 60° right, spare saw blade. Machine ready to be demonstrated - very good condition. ...

saw blade diameter: 400 / 425 x 40 mmcutting diameter: 40 - 180 mmcutting speed: 14/28 m/mincapacity 90 degrees: flat: 260 x 80 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: flat: 180 x 80 mmwork height max.: 1050 mmvoltage: 400 Vtotal power requirement: 5,0 kWweight: 1170 kgrange L-W-H: 1230 x 1205 x 1980 mmFurnishing:- semi-automatic underfloor saw- with miter adjustment, swiveling left / right- hydraulic, vertical & horizontal clamping device- large work table- stepless feed from the saw blade- saw blade- machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcutting diameter: 100 mmdimensions of saw-blade: 350 x 2,5 x 32 mmheight of material-table: 900 mmcutting speed: 38/76 m/mincapacity 90 degrees: round: 100 mmcapacity 90 degrees: flat: 170 x 90 mmcapacity 90 degrees: square: 90 x 90 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: flat: 125 x 90 mmcapacity 45 degrees: square: 90 x 90 mmcapacity 60 degrees: round: 90,0 mmcapacity 60 degrees: flat: 90 x 90 mmcapacity 60 degrees: square: 90 x 90 mmclamping range: max. 170 mmtotal power requirement: 1,8 / 2,4 kWweight of the machine ca.: 500 kg.dimensions of the machine ca.: 1200 x 600 x 2200 mmThe KASTOradial U 10 is a semi-automatic vertical circular saw with twoCutting speeds and steplessly adjustable saw feed for theuniversal use in workshop and production. The machines stands outthrough precise dovetail guides, robust gears and largecutting area. The ea ...

saw blade diameter: 300x32x2,5 mmcapacity 90 degrees: round: 10-90 mmcapacity 90 degrees: flat: 80x10-80 mm: 10-40 mm: 10-40 mm: 40x10-40 mmcapacity 90 degrees: square: 10-80 mmweight of the machine ca.: 600 kgdimensions of the machine ca.: 2590x1910x1910 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.