Araç ön ayarı aygıtları

Used DMG Microset ECO 210 tool presetter system for sale. Available at our machine tool warehouse at 50720 Zaragoza Spain for inspection and immediate delivery. The efficiency of the DMG Microset ECO 210 tool presetting machines optimizes the machining process right from the start. Helps increase the life of your tools, achieve better surface finishes and improve overall safety in your production. Tool presetting with highest precision and speed. Its satisfies all aplication needs and offers the perfect solution for various tool sizes and machine environments The highly efficient tool presetting devices from DMG Microset are the most productive and efficient. Presetting parallel to production time leads to significative time savings: setup times are optimized and machine downtimes are significantly reduced. Improved tooling with safe, early detection of damaed toosl reduces t ...

Measuring range X = 200 mm, Z = 400 / 700 mm / Microvision III Spindle type SK50

Key data: 530 mm

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

Travel Z - axis (tool length) max. 500 mm Travel X - axis (tool diameter) max. 330 mm Tool holder (basic holder) SK 50 With calibrated adapter for tool holder SK 40 with calibration edge With label printer, incl. replacement labels POS-CAM II camera system The camera system was renewed in 2020 The tool presetter is in a very neat condition, checked, cleaned, ready for immediate use. Manuals and instruction manuals are available The camera system can also be used to inspect the tool cutting edges (last picture).

Clampable cutter head type (max.): 460 mmCutter head weight (max.): 150 kgMounting disc diameter for cutter heads (Ø): 360 mmMounting cone for cutter heads Nominal diameter: Ø 58,227 mmtravel -z axis: 200 mmdiagram-drawing enlargement: ±10 - ± 500 µmweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2 x 1,5 x 2,03 mIn the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads.The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlle ...

Dimensions (LxWxH) approx. 2,600 x 1,000 x 1,600 mm Weight approx. 1,300 kg machine number 833, Digital display chalice PICO Version A 23, Clamping length approx. 2000 mm, clear width in the passage (portal) 740 x 320 mm

Ref.Nr. 00799 Name of the system Tool presetter Manufacturer: PWB Swiss, CH-9450 Altstätten Model Tool Master 10 Year of construction 2012

- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA

diameter: . mmtool adaptor: . length: . mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mDifferent sizesThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring range X-axis: 300 mmmeasuring range Y-axis: 250 mmmeasuring range Z-axis: 600 mmtool diameter: mmTable dimensions: mmControl: weight: 700 kgPresetting, shrinking and measuring machineSoftware saturn 1Zoller Multivision IIWithout toolholders.On 30. May 2022 the machine was checked by a technician from ZOLLER.Shrinking is currently not possible. The induction spool and thecontrol unit for it must be renewed.The purchase price of a comparable new machine (incl. software) fromZOLLER is approx. 100.000 EUR, with a current delivery timeof approx. 52 weeks !The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell a used Zoller tool presetter, Year of construction 2002 Dimensions approx. 2m1m2.2m high Type V720B2-00173 Zoller IPC, Type JQ87/12G With the photographed accessories (e.g. HSK100) and original instruction manual VAT on the invoice can be shown, Price plus VAT

tool length - max.: -400 mmtool diameter: -160 mmmax. tool weight: 20 kgspindle taper: SK40, HSK40/63 air pressure - required: 4-6 barOverall size: 1200X800X1700 mmmachine weight ab.: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 210 mm

Tool presetter Zoller Smile 400 Year of construction 2012 Z-axis measuring range: 400 mm Measuring range X-axis: 210 mm Tool diameter max.: 420 mm Repeatability (+/-) 0.002 mm Tolerance indicator: 0.001 mm Concentricity: 0.002 mm Automatic cutting edge shape and range detection Autofocus via CNC-controlled spindle axis (C-axis) Spindle indexing Automatic Zero Point Monitoring Tool Data Management Adapter Management The presetter is fully functional and in very good condition. It has been serviced annually by Zoller (Last maintenance 25.11.2022) Price net free loading from stock

Key data: 160 mm, 400 mm

Type smile 400 VSM400-00475 Year of construction 2004 Travel X 160 mm Z 400 mm Diameter 320 mm Longitudinal measuring range 400 mm Measuring diameter 320 mm Other equipment and accessories: Adapter from SK50 -> SK40 Adapter from SK50 -> VDI30 Adapter from SK50 -> HSK63 Software Zoller DNC manager Vers. 1.04.2

Item no. 5044: 1 gebr. Tool Presetting Device Fabr. ZOLLER, Type V 400 Z , Bauj. 2002

No. 5153: 1 gebr. Tool Presetting Device Fabr. ZOLLER

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Tool presetter Zoller V 520 manufacturer: Zoller type: V 520 year of construction: 2000 comm.-nr.: 0200/133/083/0416 stock-nr.: 1909 + Regular Price: 3.850,- € > Reduced Price: 1.925,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) Measuring area X-Axis: 210 mm Measuring area Z-Axis: 620 mm (tower height 800 mm) tool reception: SK 50 / 0300106 / Z=+20.000 current: 220 V / 50-60 Hz weight: ca. 400 kg standing area: W 1,40 x D 0,70 x H 1,90 mm voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm features Digital measuring device Heidenhain” in X+Z Manual f ...

Zoller - V420D1 - 00265 Measuring range : X150 (300)mm , Z-450mm, Shots : SK50 , SK40 , HSK . Instruction manual and software CDs available !

measuring range X-axis: 600 mmmeasuring range Y-axis: 430 mmTable dimensions: 745 mmtool diameter: SK 50/SK45 div. mmDimensions (L/W/H): 2,16x1,45x1,9 m mmweight: 730 kgvoltage: 230 Voutput:

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm

measuring range X-axis: 612 mmmeasuring range Z-axis: 800 mmtool diameter: 1200 mmweight of tools max.: 250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Adapter for tool presetters The adapter is plugged into the SK50 basic holder of the tool presetter and thus serves as an intermediate module for Tool holders with size SK30 or BBT30. The adapter is calibrated and equipped with calibration balls.