Mekanik presler (52)

NIDEC ARISA S-2-500-240-120-FD mekanik pres, 2006 yılında İspanya'da Nidec Press & Automation Co. (NP&A) tarafından üretilmiştir. Bu, otomotiv veya makine endüstrisi için seri üretim yapımında kullanılan son derece çok yönlü bir prestir. En zorlu metal şekillendirme işlemlerini bile, yani metal parçaların hassas delinmesi ve damgalamasını mümkün kılar. Standart amacının yanı sıra, uygun alet ve malzeme besleme sistemleriyle, makine transfer presi veya progresif pres olarak da kullanılabilir. Tüm işlemler 500 ton yüksek pres kuvvetiyle gerçekleştirilir. NIDEC ARISA S-2-500-240-120-FD presinin tahrik sistemi, iki bağlantı çubuğuyla birlikte çalışan bir volan ve eksantrik bir dişli üzerine kuruludur. Bu çözüm, eşit tork iletimi ve sorunsuz bir çalışma döngüsü garanti eder. Öte yandan, kaydırıcı kılavuzlar sayesinde birden fazla no ...

Auction-ID: A1-46862-26

ARISA S-2-630-240-120-LD mekanik presi, 2005 yılında İspanya'da Arisa S.A. (şimdiki adıyla Nidec Press & Automation Co. (NP&A)) tarafından üretilmiştir. Sunulan makine, otomotiv veya makine endüstrisinde geniş tanımlanmış bileşenlerin seri üretimi için mükemmel bir seçimdir. Metal parçaların hassas delinmesi ve damgalaması gibi en zorlu metal şekillendirme işlemlerini bile mümkün kılar. Standart amacına ek olarak, kullanılan takım ve malzeme besleme sistemlerine bağlı olarak, makine transfer presi veya progresif pres olarak da kullanılabilir. Tüm işleme süreçleri 630 ton yüksek pres kuvvetiyle gerçekleştirilir. Bir volan ve eksantrik dişli şeklinde, iki bağlantı çubuğuyla birlikte çalışan tahrik sistemi, tork iletimini eşit şekilde ve kaydırıcı hareketinin sorunsuz kontrolünü sağlar. Öte yandan, kaydırıcı kılavuzlar kullan� ...

Consisting of two punching stations, driven by pneumatic cylindersincl. Installed punching toolon pedestalDimensions of the pedestal: 560 x 300 x 170 mm Auction-ID: A7-46287-206

ARISA S-2-400-260-FD mekanik pres, 2000 yılında İspanya'da Arisa S.A. (şimdiki adıyla Nidec Press & Automation Co. (NP&A)) tarafından üretilmiştir. Sunulan makine, otomotiv veya makine endüstrisinde geniş tanımlanmış bileşenlerin seri üretimi için mükemmel bir seçimdir. Metal parçaların hassas delinme ve damgalamasını sağlar. Tüm bu işleme süreçleri, 400 tona kadar yüksek pres kuvvetiyle gerçekleştirilir ve bu, yüksek dinamik bir sürgü ile birleştiğinde en iyi işleme sonuçlarını garanti eder. ARISA S-2-400-260-FD, açık yan duvara sahip, dayanıklı, stres giderici bir portal tasarımına sahiptir. Bu tasarım, yüksek presleme kuvvetiyle en yoğun işlemlerde bile yüksek katılık, stabil parametreler ve tekrarlanabilirlik sağlar. İki bağlantı çubuğu, bir volan ve eksantrik bir dişli ile ayırt edilir. Bu çözüm, tork iletimini eşit  ...

Machine number: 2-0513Compressive force: 28 kNStroke: 60Table dimensions: 200 x 160 mmwith pneumatic punching tool mounted Auction-ID: A7-46287-218

Ajax 1.000 Ton Düz Yan Mekanik Dövme Presi S/N 4410 10" Vuruş 33" Kapatma Yüksekliği 36" x 36" Yatak Dakikada 80 vuruş Kısmen yeniden inşa edildi Ajax 1.000 Ton Düz Yan Mekanik Dövme Presi S/N 4621 10" Vuruş 32" Kapatma Yüksekliği 36" x 32" Yatak Dakikada 80 vuruş Destekler dahildir. Her iki pres de çalışır durumda ve güç altında.

Machine number: 2-0586Compressive force: 28 kNStroke: 60Table dimensions: approx. 200 x 150 mmincl. installed punching tool Auction-ID: A7-46287-204

Adet 1 Alüminyum tencere ve disk üretimi için ikinci el pres Mfc.: SITI İnşa Tarihi: 2005 Uzmanlar Tarafından Yenilendi Süre: 3-4 ay Kuvvet: 4000 Ton Alüminyum disklerin üretimi & indüksiyon ve normal kaplar Saksı yüksekliği: 120 / 140 mm Pres elden geçirilecek, yenilenecek ve aşağıda belirtildiği gibi satılacaktır: Yeni Silindirin Piston Taşlama Yeni Flanş Tablası modifikasyonu Yeni pompalar Yeni contalar vb. Yeni elektrikli ve elektronik parçalar Yeni program

Stroke: 12 mmCompressive force: 28 kNDelay time: 0.063 smin./max. operating pressure: 3/6 barTable dimensions: approx. 200 x 160 mm Auction-ID: A7-46287-219

Machine number: 2-0151Compressive force: 28 kNStroke: 12Table dimensions: 200 x 170 mmwith punching tool mounted Auction-ID: A7-46287-217

incl. foot switch Auction-ID: A7-46287-46

two piecesof different designs Auction-ID: A7-46287-45

Safety distance: 100 mmRun-time travel: 60 msecTable dimensions: approx. 210 x 160 mmincl. installed punching tool Auction-ID: A7-46287-213

Machine number: 3-0512Compressive force: 28 kNStroke: 60Table dimensions: approx. 200 x 160 mmincl. installed punching tool Auction-ID: A7-46287-214

Serial number: 0069Compressive force: 28 kNStroke: 12 mmDelay time: 0.063 secmin./max. operating pressure: 3/6 barTable dimensions: approx. 200 x 150 mmincl. installed punching tool Auction-ID: A7-46287-212

Wheel diameter: 800 mmTable dimensions: 370 x 230 mm Auction-ID: A7-46287-31

Machine number: 3-0419Compressive force: 3 kNStroke: 50Table dimensions: approx. 150 x 110 mm Auction-ID: A7-46287-222

Table dimensions: 475 x 475 mm Auction-ID: A7-46287-18

Table dimensions: approx. 190 x 110 mmincl. installed tools Auction-ID: A7-46287-207

Compressive force: 28 kNStroke: 12 mmSafety distance: 100 mmRun-time travel: 0.06 sTable dimensions: approx. 200 x 160 mmwith pneumatic punching tool mounted Auction-ID: A7-46287-220

Printing capacity: 8.5 kNTable dimensions: approx. 160 x 120 mmRam diameter: approx. 25 mmReference: Hansmann - Lot 32 Auction-ID: A7-46763-57

Machine number: 2-0537Compressive force: 28 kNStroke: 60Table dimensions: 200 x 160 mmPlunger: 60 x 35 mm Auction-ID: A7-46287-223

Machine number: 2-0538Compressive force: 28 kNStroke: 12Table dimensions: approx. 200 x 160 mmincl. installed punching tool Auction-ID: A7-46287-205

Machine number: 35-173-98Serial number: 2-0499Compressive force: 4.5 kNStroke: 60 mmincl. transport trolley Auction-ID: A7-46287-6

Manufacturing number: 0485.1184.463Container diameter approx.: 1300 mmReference number: Beeper - Lot 5 Auction-ID: A7-46763-2

Machine number: 2-0095Compressive force: 28 kNStroke: 12 mmSafety distance: 100 mmDelay travel: 0.06 sTable dimensions: approx. 190 x 150 mmwith pneumatic punching tool mounted Auction-ID: A7-46287-211

Toggle hand presses HK 1700 stroke 60 mm with crank with working height fine adjustment Height of the stand 450 mm Without additional effort, even more pressure in production. Maximum pressure output shortly before the end of the stroke thanks to toggle technology. Particularly stable design of spindle head and stand Pressure 17.0 kN Stroke 60 mm Projection 105 mm Working height from up to 75 -180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x415 mm Condition: never used / new (5) Auction-ID: A7-46642-154

Press force: 40 T Passage approx. : 630 mm Auction-ID: A7-46619-370

Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 8.0 kN Stroke 40 mm Projection 90 mm Working height from up to 50 - 200 mm Table surface 120 x 160 mm Machine weight approx. 22 kg Dimensions L x W x H 160 x 230 x 410 mm Condition: never used / new (5) Auction-ID: A7-46642-187

Auction-ID: A1-46503-157

Manufacturer: TOX Pressotechnik Type: KFLU 025.004 Description: Toggle Press Serial number: 439457.36 Year of Make: 2013 Max. pressing force: 16 / 25 kN (approx. 1.6–2.5 t) Total Stroke: 60.0 / 25.3 mm Weight: approx. 86 kg Auction-ID: A1-46686-80

General description Set of 2 manual industrial presses suitable for light pressing, riveting, assembly, and small stamping operations. Compact and robust units for workshop use. Technical details Type: Manual presses (arbor / toggle type) Quantity: 2 units Operation: Hand-operated lever system Configuration: - 1x vertical arbor press (simple design) - 1x adjustable press with geared head and return spring Capacity: Estimated 0.5 – 2 tons Construction: Cast iron body Mounting: Bench or floor-mounted base Application: Pressing, riveting, bearing insertion, light punching and assembly tasks Equipment - Vertical rams - Hand levers - Flat die/work surfaces - Adjustable head mechanism (on one unit) Condition and remarks Used machines. Show typical wear from workshop use. Structurally robust and suitable for continued operation. Sold as a set. No electrical components. Dimensions and weig ...

Hand spindle press / column pressManufacturer: VEB (K) Gerätebau OranienburgType: PSHS 10Masch.-Nr.: 0256Year of construction: 1958Origin: GDREquipment:    •    Solid cast design    •    Manual operation via flywheel / lever    •    Height-adjusta ble press table    •    Robust spindle guide    •    Mechanical version without electricsCondition:Used, functional.    •    Pressure capacity: 10 t    •    Plunger stroke: 200 mm    •    Spindle thickness: 50 mm    •    Weight: approx. 175 kgDimensions (approx.): &nb ...

Manufacturer: VEB Pressenwerk MorgenrötheType: PSHZ 40Name: Screw press / balancing press (manual)Description:Manually operated screw press (balancing press) in solid cast construction from industrial production. The press works purely mechanically via spindle and hand lever, without hydraulics or electrical components. Suitable for pressing, straightening, assembly and joining operations in the workshop, maintenance and manufacturing. Robust and durable construction from GDR production. Scope of delivery:– Screw press as shown– Press table / support– Press type: Screw press / balancing press– Operation: manual– Size: 40– Press force: Size 40 (according to experience, corresponds to approx. 40 t press force)– Maximum installation height: 460 mm– Total weight: 1650 kgDimensions:– Width: 1800 mm– Depth: 1800 mm– Height: 2350 mmWeight:1650 kg Auction-ID: A7-46417-70

Auction-ID: A7-46309-23

Auction-ID: A7-46309-21

Auction-ID: A7-46309-1

Auction-ID: A7-46309-3

The Dorst TPA 70S is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 19 ...

The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...

CONTROLS  electronic controls SIEMENS S7 300 PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES  total force (nominal): 250 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1100 mm  height above floor level: 1105 mm  opening in bed (left-right): 1700 mm  opening in bed (front-back): 305 mmSLIDE  table surface (left-right): 2080 mm  table surface (front-back): 1000 mm  stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke adjustment: yes   stroke min.: 20 mm  stroke max.: 180 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 500 mm  distance between columns (H-frame): 2055 mm  passline opening (free passage in side columns): 810 mmDECOILER  sheet ...

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...

The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...

The Dorst TPA 50/2 is a used mechanical powder compaction press engineered for precision and efficiency, making it suitable for demanding industry applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is robust and reliable. This model press allows you a maximum filling height of 180 mm and a pressing travel of up to 90 mm. Designed for versatility, it features an upper punch stroke of 120 mm and an adjustable travel of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. It requires a compressed air supply with an intake of approximately 200 liters per minute and has a total connected load of around 18 kW. The construction is sturdy and occupies a footprint with dimensions of approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, weighing approximately 5,500 kg. The press operates at a workplace-rel ...

The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 38 kNmPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 1200 mm  thickness of bolster plate: 200 mmSLIDE  slide force: 315 to  table surface (left-right): 1995 mm  table surface (front-back): 1100 mm  stroke: 160 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 140 mm  stroke rate (min.): 20 /min  stroke rate (max.): 80 /min  main drive power: 90 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 555 mm  distance between columns (H-frame): 2060 mm  passline opening (free passage in side columns): 1060 ...

The Dorst DK 250 is a robust used powder compaction press engineered by DORST, offering a substantial pressing force of up to 2500 kN. It supports operations with a maximum withdrawal force of 150 kN and a supporting force in the pressing position reaching 120 kN. Designed for precision, this model includes a 220 mm upper punch stroke with an adjustable travel of 120 mm. The press accommodates a pressing travel and withdrawal travel, each up to 50 mm, making it versatile for various pressing tasks. Operational performance ranges from 6 to 25 strokes per minute, and it provides a filling height of up to 100 mm. The Dorst DK 250 is efficient, consuming approximately 500 liters of air per minute and demanding a connected load of around 60.0 kW. Its dimensions, at 2500 mm in width, 1900 mm in depth, and 4800 mm in height, alongside a weight of approximately 18,500 kg, underscore its solid co ...

Mechanical Dorst TPA 45, Pressing Force max. 450 Kn, Withdrawal force max. 250 Kn, Supporting force in pressing position max. 130 Kn, Die return force max. 60 Kn, Upper punch stroke 120 mm, Upper punch adjusting travel 70 mm, Number of strokes 6-22 1/min, Filling height max. 120 mm, Pressing travel max. 60 mm, Withdrawal travel max. 60 mm, Top pressing travel max 6 mm, Upper punch pneumatic preload max. 30 mm, Compressed air supply , Air consumption , Intake air aprox. 70 l/min, Total connected load aprox. 14,0 Kw, Press dimensions:, Width aprox. 1550 mm, Depth aprox. 1650 mm, Height aprox. 2200 mm, Weight of the press aprox. 3900 Kg, Oil filling quantity :, Press housing 45 l (gear oil), Workplace-related sound 79 dB (A)