Atölye bankları (57)

Sunulan 15 TESTON'dan (TPH918 ESD) 15 adet ikinci el ESD laboratuvar çalışma tezgahı ve düzenli durumda bağlantı da dahil olmak üzere sunulmaktadır (fotoğraflara bakınız). Sandalyeler Ludwigshafen bölgesinde (posta kodu bölgesi 67XXX) bulunmaktadır. Sunulan fiyat (sadece masalar için) kendi kendine alınan (EXW) içindir. Sandalye başına net 50€ ekstra ücret karşılığında, BIMOS'tan 12 ESD çalışma sandalyesi satın alınabilir.

Auction-ID: A7-50403-69

- Workbench with tool wall, 3 shelves and 1 tabletop - 18 mm thick wooden worktop - Powder-coated steel - Can also be used freestanding - Perforated back panel (incl. 10 hooks) - Maximum load on the two lower shelves and the table top: 175 kg each - Maximum load on top shelf: 50 kg. - Size: H180 x W90 x D60CM Auction-ID: A1-40898-11

- Workbench with tool wall, 3 shelves and 1 tabletop - 18 mm thick wooden worktop - Powder-coated steel - Can also be used freestanding - Perforated back panel (incl. 10 hooks) - Maximum load on the two lower shelves and the table top: 175 kg each - Maximum load on top shelf: 50 kg. - Size: H180 x W90 x D60CM Auction-ID: A1-40898-294

- Workbench with tool wall, 3 shelves and 1 tabletop - 18 mm thick wooden worktop - Powder-coated steel - Can also be used freestanding - Perforated back panel (incl. 10 hooks) - Maximum load on the two lower shelves and the table top: 175 kg each - Maximum load on top shelf: 50 kg. - Size: H180 x W90 x D60CM Auction-ID: A1-40898-183

concerns 6 boxes; consisting of cabinet660x450x1990mm; worktop wood 1320x445x23mm; case 660x450x875mm; wall cabinets 1320x330x405mm; tool rack 1320x660mmx10mm; tool storage with 4 drawers 660x450x885mm; with leveling feet: 5201 Auction-ID: A1-50092-77

Built up; depth cabinets and drawers above 330mm; depth of cabinets and drawers under 540mm; middle drawers lockable; Auction-ID: A1-50092-98

Built up; depth cabinets and drawers above 330mm; depth of cabinets and drawers under 540mm; middle drawers lockable; Auction-ID: A1-50092-106

concerns 6 boxes; consisting of cabinet660x450x1990mm; worktop wood 1320x445x23mm; case 660x450x875mm; wall cabinets 1320x330x405mm; tool rack 1320x660mmx10mm; tool storage with 4 drawers 660x450x885mm; with leveling feet: 5201 Auction-ID: A1-50092-81

Equipped with Powder-coated steel workbench with stainless steel drawers and doors; 5cm raised edge. Auction-ID: A1-47363-119

Contents consisting of an attached vice, jaw width: 125 mm, as well as a sanding plate, a rear wall, incl. lighting system, as well as a tool adjuster from the manufacturer DIEBOLD, as well as various clamping jawsReference: Hanon - Lot 39 Auction-ID: A7-49882-415

A workbench or work counter is offered. Estimated value of goods: 500€Only the inventory offered is part of the auction. The buyer is responsible for the dismantling and loading of the means of transport. Only bid if you have sufficient financial means, a bid is binding. Auction-ID: A7-50213-334

A workbench or work counter with vice is offered. Estimated value of goods: 500€Only the inventory offered is part of the auction. The buyer is responsible for the dismantling and loading of the means of transport. Only bid if you have sufficient financial resources, a bid is binding. Auction-ID: A7-50213-335

Auction-ID: A1-49968-142

Auction-ID: A1-49968-58

Auction-ID: A1-49968-59

Auction-ID: A1-49968-165

Auction-ID: A1-49968-57

Auction-ID: A1-49968-60

Auction-ID: A1-49968-56

Auction-ID: A1-49968-55

Content consisting of various milling cutters, inserts in different sizes, reamers, twist drillsAttention: all items stored on the workbench are not included in the scope of delivery!Reference: Choice - Lot 68 Auction-ID: A7-49882-305

Without worktop! Auction-ID: A1-49875-77

Contents consisting of a cutter head . Twist drills, various keys, parallel supports, taps, twist drills, clamping devicesAttention: without the clamping system shown in the photosReference: Option - Lot 63 Auction-ID: A7-49882-304

Without worktop! Auction-ID: A1-49875-78

Content consisting of a small marking plateplate plate dimensions: 300 x 210 mma vice, jaw width: 100 mmvarious dial gauges, turning steels, as well as a three-jaw chuck with a diameter: 250 mm, a four-jaw chuck with a diameter: 200 mm, a two-jaw chuck with a diameter: 160 mm, as well as another three-jaw chuck with a diameter: 210 mmand an attached vice, jaw width: 100 mmReference: C.O. - Lot 7 Auction-ID: A7-49882-287

Without machine vise Auction-ID: A1-50026-16

rotatable, Rotating blade size 560 x 860 mm, Height 860 mm, Metal base, Spray turning stand, Bearing superstructure. Auction-ID: A1-48994-44

Auction-ID: A1-50026-12

Without content / edition ! Only the workbenches Auction-ID: A1-50026-30

Without contents! Without clamped vice! Auction-ID: A1-50026-29

2-component stainless steel workstation systemworkbench made of stainless steel with protective screen, base cabinet, lighting, 2-component adhesive feeder for silicone adhesives and various accessories for adhesive processingDimensions: 1400 x 700 x 2050 mm (LxDxH) Auction-ID: A7-49816-239

Auction-ID: A1-49846-306

Auction-ID: A1-49846-296

Auction-ID: A1-49846-330

Content consisting of various parallel supports, a GRESSEL vice, jaw width: 90 mmReference: Alesco - Lot 64 Auction-ID: A7-49882-39

Contents consisting of an attached vice, jaw width: 125 mm, as well as twist drills in various designs, a back wall with small parts box, as well as lighting, reamers, tapping heads, cutter headsAttention: the drill grinding machine shown in the photos is not included in the scope of delivery! Reference: Alesco - Lot 54 Auction-ID: A7-49882-32

Contents consisting of an attached vice, jaw width: 125 mm, as well as various Allen screws, pinsAttention: the lifting magnet on the workbench is not included in the scope of delivery! Reference: Alesco - Lot 9 Auction-ID: A7-49882-7

Content consisting of a granite measuring plate, dimensions: 500 x 300 x 60 mm and a rear wall with Allen keys, mobileReference: Alesco - Lot 8 Auction-ID: A7-49882-6

consisting of two workbenches - connected to electricity and compressed air systemsalso incl. four attached visesjaw widths each: 125 mmincl. hand toolswith electrical testing equipmentAttention: the electrical spare parts shown in the photos are not included in the scope of delivery! Auction-ID: A7-49089-434

consisting of two workbenches - connected to electricity and compressed air systemsalso incl. an attached viceJaw width: 125 mmincl. hand toolswith electrical test deviceAttention: the electrical spare parts shown in the photos are not included in the scope of delivery! Auction-ID: A7-49089-435

Dimensions per table shelf: 1200 x 800 mmheight-adjustableincl. electrical connections Auction-ID: A7-49089-558

Incl. lighting Auction-ID: A7-49089-387

with attached vice, jaw width: 150 mm as well as a high-voltage connection and two normal connections Auction-ID: A7-49089-402

incl. attached visejaw width: 150 mmand a tool presetter from the manufacturer PCB, type: TOOLBOY Auction-ID: A7-49089-348

Contents consisting of an attached visejaw width: 150 mmas well as a scale and a demagnetizer from the manufacturer WAGNER Auction-ID: A7-49089-141

Contents consisting of a small hinged door cabinet and an attached vice, jaw width: 150 mmalso various power connections Auction-ID: A7-49089-568

Auction-ID: A7-49089-258

Content consisting of a tool presetter, type: TOOLBOYand various rollersincl. power connections Auction-ID: A7-49089-184

Auction-ID: A7-49089-256